making lake pigments

Making Lake Pigments: The Ultimate Guide to DIY Natural Colors

By Sarah White
AD

Lake pigments are insoluble colorants made by laking a soluble dye onto an inert substrate, usually with a metal salt such as alum. The word lake comes from lacca, a resinous substance, but modern lake pigments are chemical precipitates rather than simple plant powders. They are the reason historical paints could be transparent, glowing, and lightfast enough for glazes.

Making lake pigments at home or in a studio is part chemistry, part cooking, and part patience. You extract color from roots, insects, or wood, then coax that color into an insoluble solid that can be filtered, washed, dried, and mulled into paint. This guide covers the principles, tools, process, recipes, and troubleshooting for creating natural lake pigments safely.

Understanding Lake Pigments: Chemistry, History, and Materials

A lake pigment begins with a dye, which is soluble and will bleed through water. The goal is to convert that dye into a pigment, which is insoluble and stays put in a binder like gum arabic, oil, or egg tempera. To do that, you need a substrate that gives the pigment body and a mordant or precipitant that bridges dye and substrate.

AD
How to make a lake pigment
How to make a lake pigment
How to Make a Lake Pigment
How to Make a Lake Pigment
Easy How-To Make A Lake Pigment - Botanical Colors
Easy How-To Make A Lake Pigment - Botanical Colors

Historically, lake pigments were prized by painters. Madder lake, carmine from cochineal, weld yellow, and logwood purple appear in manuscripts, easel paintings, and textiles. Modern makers still value them for their unique transparency, subtle hues, and the control that comes from making a batch yourself.

The Chemistry Behind Dye Precipitation

Most natural dyes are organic molecules with functional groups that can bind to metal ions. When you add alum, typically potassium aluminum sulfate, you introduce aluminum ions. Under the right pH, those ions form aluminum hydroxide or related species that carry a positive charge. The dye molecules, often negatively charged, attach to these species and become trapped in a growing solid particle.

two tortillas sitting on top of a table covered in purple food colorings
two tortillas sitting on top of a table covered in purple food colorings
How to make Lake Pigments - Lost in Colours
How to make Lake Pigments - Lost in Colours
Lake pigment making from Madder Root
Lake pigment making from Madder Root

The exact chemistry depends on the dye. Madder contains anthraquinones, cochineal contains carminic acid, weld contains flavonoids, and logwood contains hematoxylin. Temperature, pH, concentration, and the order of addition all influence particle size, shade, and lightfastness. That is why two makers can follow the same recipe and still produce different lakes.

Essential Tools and Safety Setup

Use glass, enamel, or stainless steel pots and spoons. Avoid aluminum, iron, and copper unless a recipe specifically calls for them, because reactive metals can shift the color or contaminate the batch. You will also need fine mesh strainers, coffee filters or filter paper, jars, a kitchen scale, pH strips, a thermometer, and a mortar and pestle or glass muller for grinding.

AD

Safety matters because mordants and pH adjusters are not harmless. Alum is relatively low risk, but soda ash, potash, lye, and some dye plants can irritate skin, eyes, and lungs. Work in a ventilated area, wear gloves and eye protection, label all containers, and keep pigment-making equipment separate from food preparation. Store dry pigments away from children and pets.

Easy How-To Make A Lake Pigment - Botanical Colors
Easy How-To Make A Lake Pigment - Botanical Colors
a person is painting some food on a plate with the words how to make botanical watercolors
a person is painting some food on a plate with the words how to make botanical watercolors
Making Botanical Lake Pigments for Watercolors and Pastels
Making Botanical Lake Pigments for Watercolors and Pastels
Plants & Colour
Plants & Colour
Botanical Ink & Pigment Making Guide
Botanical Ink & Pigment Making Guide
Making lake pigments - Rebecca Desnos
Making lake pigments - Rebecca Desnos

Step-by-Step Process for Making Lake Pigments

The basic workflow is straightforward: extract the dye, prepare the precipitation bath, combine the solutions, adjust pH, let the lake form, wash it, filter it, and dry it. Each step affects the final pigment. A clean extract produces a cleaner lake, while a rushed precipitation can create coarse particles or a muddy color.

Start with small batches. A few grams of dye material can yield enough pigment for testing. Keep notes on source, water volume, temperature, pH, and quantities. Those notes turn a lucky result into a repeatable recipe and help you troubleshoot when a batch refuses to settle or dries too pale.

AD

Extracting the Dye Source

Plant and insect dyes are usually extracted with water. Chop or grind the material, cover it with soft or distilled water, and heat gently. Some dyes need only a short simmer, while others benefit from repeated soaks. Strain the liquid through fine cloth or a coffee filter before precipitation, because stray plant matter can cloud the lake and complicate washing.

blue flowers with the words the process of making botanical lake pigments in white letters
blue flowers with the words the process of making botanical lake pigments in white letters
a jar filled with yellow liquid sitting on top of a wooden table next to flowers
a jar filled with yellow liquid sitting on top of a wooden table next to flowers
Making lake pigments - Rebecca Desnos
Making lake pigments - Rebecca Desnos
Lake Pigment Process
Lake Pigment Process

For madder root, a warm extraction around 60 to 70 degrees Celsius helps preserve the red rather than pulling too much brown. Cochineal is often simmered briefly and then steeped. Weld and logwood can be simmered longer. If the dye is pH-sensitive, adjust the extract with a little acid or alkali, but add it slowly and check the color after each addition.

Precipitating and Washing the Lake

Dissolve alum in hot water, then add it to the dye extract or add the extract to the alum, depending on the recipe. Next, slowly add a weak alkali solution, such as soda ash or potash dissolved in water. You are looking for a visible floc: colored particles that gather, swirl, and begin to settle. Stop when the liquid above the floc becomes clearer or when the target pH is reached.

AD

Once the lake has formed, let it settle for several hours or overnight. Decant the clear liquid, then rinse the pigment with distilled water. Repeat until the rinse water is nearly clear and the pigment is close to neutral. Filter the slurry, dry it slowly in a dark, dust-free place, and break up any hard chunks before mulling it into paint.

Recipes, Troubleshooting, and Creative Applications

Classic lake pigments give you a starting point, but they are not rigid formulas. Ratios of dye, alum, and alkali can be adjusted to shift hue, transparency, and strength. A madder lake might lean toward orange-red or deep rose, while a cochineal lake can range from scarlet to crimson depending on pH and mordant.

Once dried, lake pigments can be used in watercolor, oil, tempera, gouache, and pastel. They are especially beautiful in glazes because many are transparent. Test each batch in your chosen binder, and remember that natural lakes may fade faster than modern synthetic pigments, so display or store finished work thoughtfully.

Classic Lake Pigment Recipes to Try

For a simple madder lake, extract chopped madder root in warm water, strain, and add a solution of alum. Then slowly add soda ash water until a red floc forms. Let it settle, wash with distilled water, and dry. The result is often a soft, warm red that works well in watercolor and egg tempera.

For cochineal carmine, simmer crushed cochineal insects, strain, and combine with alum and a small amount of cream of tartar. Add soda ash solution carefully until the scarlet floc appears. Weld with alum and potash gives a bright yellow lake, while logwood with alum and soda can produce a violet to blue-purple lake. Label every batch, because similar recipes can yield surprisingly different hues.

Troubleshooting Common Problems

If no precipitate forms, the dye concentration may be too low, the pH may be wrong, or there may not be enough alum. Add more dye extract or a little more alum solution, then adjust pH in small steps. If the lake is pale, the dye may be weak, or too much water may have diluted the bath. If it is muddy, the extract may contain tannins, sugars, or plant debris that should have been filtered out.

Slow settling can be improved by gentle warming, adding a pinch more precipitant, or simply waiting. Do not boil vigorously after the floc forms, because that can break the particles apart. If the dried pigment is gritty, mull it longer with a glass muller and a small amount of binder. If it fades quickly, use it in sketchbooks or tinted grounds rather than permanent works, and store it in the dark.

Making lake pigments is a way to slow down and work with color as a material, not just a product from a tube. Begin with one trusted source, keep a notebook, and treat every batch as a small experiment. The more you observe, the better your lakes will become, and the more your paintings will carry a history that you made by hand.

AD