m18 hackzall

M18 Hackzall: Ultimate Cordless Cutting Power Review and Guide

By Amanda Taylor
AD

If you have ever tried to cut a copper pipe under a sink or trim a branch while balancing on a ladder, you already understand why the Milwaukee M18 Hackzall exists. It is a one-handed reciprocating saw built for the awkward, cramped, and overhead cuts that a full-size SAWZALL cannot handle comfortably.

The M18 Hackzall combines compact dimensions, serious cutting power, and the flexibility of the M18 battery platform. That mix has made it a favorite among plumbers, electricians, HVAC technicians, remodelers, and serious DIYers who want a cordless saw that can go where the work is.

What Makes the M18 Hackzall a Standout Cordless Saw?

The core appeal of the M18 Hackzall is control. A traditional reciprocating saw often demands two hands and a lot of clearance, but the Hackzall is designed to be operated with one hand while the other hand stabilizes a pipe, holds a layout mark, or keeps you steady on a ladder. That single design choice changes how you approach repair and remodel work.

AD
M18 FUEL GEN-2 18V Lithium-Ion Brushless Cordless SAWZALL Reciprocating Saw w/5.0ah Battery
M18 FUEL GEN-2 18V Lithium-Ion Brushless Cordless SAWZALL Reciprocating Saw w/5.0ah Battery
M18 FUEL™ HACKZALL® Reciprocating Saw Kit
M18 FUEL™ HACKZALL® Reciprocating Saw Kit
Milwaukee M18 FUEL GEN-2 Brushless Cordless SAWZALL Reciprocating Saw (Tool Only) - 2821-20
Milwaukee M18 FUEL GEN-2 Brushless Cordless SAWZALL Reciprocating Saw (Tool Only) - 2821-20

Milwaukee also built the Hackzall around the M18 system, which means the same REDLITHIUM batteries that power your drill, impact driver, circular saw, and grinder can power this saw. For anyone already using M18 tools, the Hackzall becomes an easy addition that adds cutting capability without introducing another battery platform.

One-Handed Control in Tight Spaces

The compact body and top-mounted motor of the M18 Hackzall let you reach into cabinets, between studs, above ceiling tiles, and under sinks. Instead of forcing a bulky saw into a space where it barely fits, you can make short, controlled cuts with the tool held in one hand. That is especially useful for plumbing and electrical rough-in work where pipes, wires, and framing create constant obstacles.

Milwaukee M18 FUEL HACKZALL Reciprocating Saw (Bare Tool) & 12-Piece SAWZALL Blade Set Bundle
Milwaukee M18 FUEL HACKZALL Reciprocating Saw (Bare Tool) & 12-Piece SAWZALL Blade Set Bundle
Milwaukee 2719-21 M18 FUEL HACKZALL Reciprocating Saw Kit
Milwaukee 2719-21 M18 FUEL HACKZALL Reciprocating Saw Kit
Milwaulkee 2719-20 M18 FUEL™ Hackzall (Tool Only)
Milwaulkee 2719-20 M18 FUEL™ Hackzall (Tool Only)

Milwaukee’s Quik-Lok blade change system on many M18 Hackzall models also helps in tight spots. You can swap a worn blade without hunting for a separate wrench, which saves time when you are moving between metal, wood, and plastic cuts. The result is a saw that feels more like an extension of your hand than a piece of heavy equipment.

M18 Battery Platform and Runtime

Battery choice has a major effect on how the M18 Hackzall feels and performs. A compact 2.0 Ah or 3.0 Ah REDLITHIUM battery keeps the tool light and balanced, which is ideal for overhead cuts and quick service calls. A 5.0 Ah or 6.0 Ah battery adds runtime for longer demolition or installation sessions, though it also adds noticeable weight at the rear of the tool.

AD

For M18 FUEL Hackzall models, High Output batteries can deliver stronger sustained performance in demanding cuts. In everyday use, most users find that a 4.0 Ah or 5.0 Ah pack offers a practical balance between runtime and handling. The key is to match the battery to the job rather than automatically reaching for the largest pack in your truck.

Hackzall Around the House
Hackzall Around the House
Milwaukee® Tool Official Site | Nothing but HEAVY DUTY®
Milwaukee® Tool Official Site | Nothing but HEAVY DUTY®
Milwaukee 2625-20 M18 18-Volt Lithium-Ion Cordless Hackzall Reciprocating Saw, Bare Tool
Milwaukee 2625-20 M18 18-Volt Lithium-Ion Cordless Hackzall Reciprocating Saw, Bare Tool
Milwaukee M18 FUEL 3-Tool Combo Kit Bundle
Milwaukee M18 FUEL 3-Tool Combo Kit Bundle

M18 Hackzall Models, Blades, and Cutting Performance

Milwaukee has offered several M18 Hackzall versions, and the differences matter when you are buying. The brushed M18 Hackzall 2625-20 is a capable, straightforward option for occasional cutting and light professional use. The M18 FUEL Hackzall 2719-20 steps up with a brushless motor, advanced electronics, and improved efficiency under load.

Both models use standard reciprocating saw blades, so you are not locked into a proprietary blade line. That is a major advantage because you can choose from Milwaukee SAWZALL blades, carbide-tipped demolition blades, fine-tooth metal blades, and aggressive wood-cutting blades based on the material in front of you.

AD

Milwaukee M18 Hackzall vs M18 FUEL Hackzall

The brushed M18 Hackzall 2625-20 delivers up to 3,000 strokes per minute and a 3/4-inch stroke, which is enough for PVC, copper, conduit, nails, and light wood cutting. It is a strong value if you need a compact cordless saw for maintenance work, DIY projects, and intermittent jobsite tasks. It does not have the same efficiency or electronic protection as the FUEL model, but it remains a useful tool.

The M18 FUEL Hackzall 2719-20 uses a POWERSTATE brushless motor, REDLINK PLUS intelligence, and a 3/4-inch stroke with up to 3,000 strokes per minute. It runs cooler, extracts more work from each battery charge, and manages heat and overload conditions more intelligently. For daily trade use, the FUEL version is usually the better long-term investment.

Choosing the Right Blade for the Job

Blade selection is where many users either get great results or blame the saw for poor performance. For copper pipe, PVC, and conduit, use a fine-tooth blade with a higher tooth count, such as 14 TPI to 24 TPI, to reduce grabbing and produce cleaner cuts. For wood with nails, a demolition blade with carbide teeth can survive the abuse that would ruin a standard wood blade.

AD

For pruning and yard work, a coarse wood blade with 5 TPI to 6 TPI clears chips quickly and cuts fast. For metal studs and angle iron, choose a bi-metal blade designed for metal cutting and let the saw run at full speed with light pressure. Using the wrong blade is the fastest way to overheat the tool, shorten blade life, and create rough cuts.

Real-World Uses, Buying Tips, and Maintenance

The M18 Hackzall shines in service and repair work because it can make cuts that would otherwise require a hacksaw or a larger reciprocating saw. It is not meant to replace a full-size SAWZALL for heavy demolition, but it handles a surprising range of tasks when paired with the right blade and battery. That versatility is why so many contractors keep one on the truck even when they already own bigger saws.

When buying, decide whether you need a bare tool or a kit. If you already own M18 batteries and a charger, the bare tool is the economical choice. If you are new to the platform, a kit with a battery and charger can be a better value, especially if it includes a carrying case and a starter blade.

Common Jobs for an M18 Hackzall

Plumbers use the Hackzall to cut copper, PEX, PVC, and threaded rod in tight spaces. Electricians use it for conduit, cable tray, and metal framing where a full-size saw is too bulky. HVAC technicians appreciate it for cutting ductwork, pipe, and hanger rod, while remodelers use it for cutting nails, screws, and old framing during tear-out.

Homeowners also find plenty of uses, including pruning branches, breaking down pallets, cutting PVC for sprinkler repairs, and trimming lumber for small projects. The one-handed design makes it less intimidating than a large recip saw, which is a real benefit for users who do not cut frequently but need a tool that can handle odd jobs.

Battery, Kit, and Maintenance Advice

For the best balance, keep a compact battery for overhead and precision work and a larger pack for long cutting sessions. Avoid storing the tool with a blade installed in a way that puts pressure on the blade clamp, and inspect the clamp for debris that can prevent the blade from seating properly. A clean blade clamp helps maintain straight cuts and reduces vibration.

Let the blade do the cutting rather than forcing the tool through the material. Excessive pressure creates heat, wears blades quickly, and drains batteries faster. When the blade becomes dull, replace it immediately; a sharp blade is safer and more efficient than a worn one. Store batteries in a cool, dry place and avoid leaving them in a hot truck cab for extended periods.

If you already own Milwaukee M18 batteries, adding a Hackzall is one of the most practical ways to expand what your kit can do. If you are starting fresh, compare the brushed and FUEL models against the work you actually perform, then choose the blade and battery combination that fits your daily cutting needs. The right M18 Hackzall setup can turn a frustrating, cramped cut into a quick task and keep your projects moving forward.

AD