Leviton R50-ILP06: Ultimate Wiring & Installation Guide with Specs and Compatibility
For anyone installing or replacing an electric range, the power cord is one of those small components that carries a lot of responsibility. The Leviton R50-ILP06 is a 50-amp, 6-foot range cord designed for heavy-duty electric cooking appliances, and it is often chosen for older homes that still use a 3-wire receptacle. Understanding exactly what this cord does, where it fits, and how to install it safely can save you time, money, and a serious electrical hazard.
This guide takes a close look at the Leviton R50-ILP06, including its specifications, compatibility, installation considerations, and the important differences between 3-wire and 4-wire range circuits. Whether you are a DIY homeowner or a working electrician, the details below will help you decide if this model is the right match for your project.
What Is the Leviton R50-ILP06?
The Leviton R50-ILP06 is a 50-amp range cord that measures 6 feet in length. It is built to connect an electric range, oven, or similar high-demand appliance to a compatible wall receptacle. The model is part of Leviton’s range cord lineup, and its “R50” prefix generally indicates a 50-amp rating, while the “06” refers to the 6-foot cord length.
This specific cord is a 3-wire design with a NEMA 10-50P plug. That means it has two hot conductors and one neutral conductor, but no separate equipment grounding conductor. It is intended for older 3-wire branch circuits and should not be confused with modern 4-wire range cords that use a NEMA 14-50P plug.
Model Number and Core Specifications
The Leviton R50-ILP06 is rated for 50 amps and 125/250 volts, which matches the typical power requirements of a full-size electric range. The cord uses heavy-gauge stranded copper conductors, often listed as 6/2 and 8/2 SRDT construction. The SRDT jacket is designed for service range and dryer applications, offering resistance to heat, moisture, and the general wear that comes with appliance connections.
At 6 feet long, the cord provides enough slack for most standard range installations while avoiding excessive coil behind the appliance. The plug is a molded NEMA 10-50P configuration with two angled hot blades and one U-shaped neutral blade. The appliance end is typically left bare for field wiring to the range’s terminal block.
Physical Design and Build Quality
Leviton builds the R50-ILP06 with a durable molded plug and a flexible yet tough cord jacket. The conductors are color-coded to simplify installation: black and red for the hot legs, and white for the neutral. That color coding helps reduce wiring mistakes when connecting the cord to the range’s terminal block.
The strain relief area is reinforced to handle the repeated movement and vibration that can occur when a range is pulled out for cleaning or service. The plug itself is designed to seat firmly in a NEMA 10-50R receptacle, reducing the chance of a loose connection that could overheat under a 50-amp load.
Where the R50-ILP06 Fits in Real Installations
The R50-ILP06 is most commonly used in older homes and apartments where the range circuit was installed before modern 4-wire requirements became standard. In these settings, the wall receptacle is usually a NEMA 10-50R, which accepts the 3-wire NEMA 10-50P plug on this Leviton cord.
It is also a practical replacement cord when an existing 3-wire range cord has become damaged, brittle, or loose. Because the Cord is rated for 50 amps, it can handle the current draw of most electric ranges, including models with bake, broil, and self-cleaning features that pull significant power.
Compatibility with NEMA 10-50 Receptacles
The Leviton R50-ILP06 is designed to mate specifically with a NEMA 10-50R receptacle. This receptacle is a 3-wire, 125/250-volt device with two hot slots and one neutral slot. If your wall outlet has a round 4-wire pattern with a straight ground pin, this cord will not fit, and you will need a 4-wire range cord instead.
Before purchasing the R50-ILP06, verify the receptacle shape and the branch circuit wiring. A 3-wire circuit typically has two insulated hot conductors and one insulated neutral, with no separate ground wire. If you see a bare copper or green ground wire in the box, you may have a 4-wire circuit and should use a matching 4-wire cord.
Common Appliances and Circuit Requirements
This cord is suitable for freestanding electric ranges, slide-in ranges, and some wall ovens that require a 50-amp circuit. It is not intended for smaller appliances like dryers, which use a different plug configuration, or for welders and EV chargers that have their own specific receptacle types.
The circuit feeding the range should be protected by a 50-amp breaker and wired with conductors sized for that load. The R50-ILP06 matches that circuit rating, but the cord alone does not upgrade or change the circuit. If the breaker, wiring, or receptacle is undersized or damaged, those issues must be corrected by a qualified electrician before the cord is installed.
Installation, Safety, and Code Considerations
Installing a range cord is straightforward for someone with basic electrical experience, but it involves high voltage and high current. The Leviton R50-ILP06 must be installed with the power completely off, and every connection must be tight and correctly matched. A loose terminal can generate heat, arc, and create a fire risk.
Local codes and the National Electrical Code set the rules for range circuits. While existing 3-wire circuits are often permitted to remain in service, new construction and many renovations require a 4-wire circuit with a separate equipment ground. Always check with your local inspection authority before assuming a 3-wire cord is acceptable.
Step-by-Step Installation Overview
Start by turning off the range circuit at the breaker panel and verifying that power is off with a voltage tester. Remove the range’s rear access cover to expose the terminal block, then install a strain relief connector in the cord hole. Feed the Leviton R50-ILP06 cord through the strain relief and strip the outer jacket carefully without nicking the inner conductors.
Connect the black and red wires to the outer hot terminals, and connect the white wire to the center neutral terminal. For a 3-wire cord, the neutral terminal is also bonded to the range frame in the factory-approved manner. Tighten each terminal to the torque specified by the range manufacturer, secure the strain relief, and replace the access cover before restoring power.
3-Wire vs. 4-Wire: What You Must Know
A 3-wire range circuit uses two hots and a neutral, with the neutral serving double duty as a return path and a frame bond in older installations. A 4-wire circuit adds a separate equipment ground, which is safer because the neutral and ground are not combined. The Leviton R50-ILP06 is strictly a 3-wire cord, so it cannot provide the separate ground that a 4-wire circuit offers.
If you are replacing a range in a home with a 4-wire receptacle, do not use the R50-ILP06. Instead, choose a 4-wire range cord with a NEMA 14-50P plug. Adapters that convert 3-wire to 4-wire or vice versa are generally discouraged because they can create unsafe neutral-to-ground connections and may violate local codes.
Matching the right cord to the existing receptacle and circuit is the most important step in a safe range installation. The Leviton R50-ILP06 remains a solid choice for older 3-wire setups, provided the circuit is in good condition and local rules allow it. Before you buy, take a photo of your wall outlet, confirm the breaker size, and inspect the range’s terminal block so you can install the correct cord with confidence.