leviton 13351

Leviton 13351 Keyless Porcelain Lampholder – Medium Base, White

By William Garcia
AD

The Leviton 13351 is a medium-base keyless lampholder designed for fixtures that need a simple, reliable socket rather than an integrated switch. It is commonly found in pendant lights, ceiling fixtures, signs, and utility lighting, and it has become a go-to replacement part for electricians and DIYers who want dependable performance without unnecessary complexity.

If you are searching for the Leviton 13351, you are likely comparing specs, checking compatibility, or preparing to replace a worn socket. This guide walks through what the 13351 does, how it is wired, where it works best, and what to check before you buy.

Leviton 13351 Lampholder Overview

The Leviton 13351 is a keyless medium-base lampholder. “Keyless” means it has no pull chain, push switch, or turn knob. The fixture is controlled by a wall switch, a dimmer, or another remote switching method. This makes the 13351 ideal for fixtures where the socket itself should stay simple and compact.

AD
Leviton Leviton Renu: Snap On/Off Wallplates and Faceplates in 20 Color Choices
Leviton Leviton Renu: Snap On/Off Wallplates and Faceplates in 20 Color Choices
Lever Edge | Install Switches & Outlets Faster | Leviton
Lever Edge | Install Switches & Outlets Faster | Leviton
Renu
Renu

The part is often sold as the 13351-W, where the “W” indicates a white finish. Its medium base accepts standard E26 bulbs, the same base used by most household A19, A21, ST19, and decorative lamps. The socket is rated for 660W at 250V, which gives it plenty of capacity for typical residential and light commercial lighting loads.

Key Specifications and Features

At a glance, the Leviton 13351 offers a 660W-250V rating, a medium E26 base, keyless operation, and a white finish that blends into most fixture canopies and pendant housings. It typically uses screw terminals for wiring and a 1/8 IP threaded cap for mounting to compatible fixture stems or nipples.

Leviton Receptacle Bl Str 125Vac 20A 2 3 Wht 1Hp (16352-1PW)
Leviton Receptacle Bl Str 125Vac 20A 2 3 Wht 1Hp (16352-1PW)
a white light switch with the word levion on it's front cover and side panel
a white light switch with the word levion on it's front cover and side panel
Leviton Leviton Renu: Snap On/Off Wallplates and Faceplates in 20 Color Choices
Leviton Leviton Renu: Snap On/Off Wallplates and Faceplates in 20 Color Choices

Because it has no integral switch, the 13351 has fewer mechanical parts that can wear out. That can mean longer service life in fixtures that are switched remotely. It is also a direct replacement for many standard keyless sockets, making it a practical choice when an older socket becomes brittle, cracked, or intermittent.

Medium Base and Bulb Compatibility

The medium base, also called E26, is the most common lamp base in North America. That means the Leviton 13351 can accept incandescent, halogen, LED, and CFL bulbs as long as the bulb base matches and the bulb’s electrical requirements stay within the socket’s rating. LED bulbs are often a smart upgrade because they run cooler and use far less power.

AD

Compatibility is not only about the base. You also need to check bulb shape, length, and fixture clearance. A large A21 or decorative bulb may fit the socket but not the fixture shade or globe. Always confirm that the bulb’s wattage and voltage are acceptable for the socket and the fixture’s own listing.

Leviton DSL06
Leviton DSL06
a white light switch sitting on top of a white wall mounted device with two buttons
a white light switch sitting on top of a white wall mounted device with two buttons
Leviton Receptacle Gfci 125Vac 20A 2 3 Ivory 1Hp (GFNT2-I)
Leviton Receptacle Gfci 125Vac 20A 2 3 Ivory 1Hp (GFNT2-I)
a white and black switch box with four switches on each side, one is facing the camera
a white and black switch box with four switches on each side, one is facing the camera
Leviton Decora Color Change Kits
Leviton Decora Color Change Kits
Leviton Receptacle Dx Bl Str 125Vac 15A 2 3 Wht (16252-2PW)
Leviton Receptacle Dx Bl Str 125Vac 15A 2 3 Wht (16252-2PW)

Installing the Leviton 13351 Safely

Before any installation work, shut off power at the circuit breaker. Do not rely on a wall switch alone, because someone could turn it on while you are working. Use a non-contact voltage tester or multimeter to confirm that the wires are de-energized before touching them.

Basic tools for the job include a screwdriver, wire strippers, wire nuts, electrical tape, and a voltage tester. If you are replacing an old socket, take a photo of the existing wiring before disconnecting anything. That simple step can prevent confusion when you connect the new Leviton 13351.

AD

Step-by-Step Wiring Instructions

Start by removing the old lampholder from the fixture. Note which wire connected to the brass or dark screw and which connected to the silver or light screw. In standard wiring, the black or red hot wire connects to the brass screw, and the white neutral wire connects to the silver screw. If the fixture has a green ground wire or grounding screw, bond it to the fixture’s metal grounding point according to local code.

the levion series 100 is an electronic device that uses two different types of wires
the levion series 100 is an electronic device that uses two different types of wires
twelve pairs of levion quiet switch plugs in their packaging on a white background
twelve pairs of levion quiet switch plugs in their packaging on a white background
Leviton Receptacle Dx Bl Str 125Vac 20A 2 3 Wht (CR020-1PW)
Leviton Receptacle Dx Bl Str 125Vac 20A 2 3 Wht (CR020-1PW)
Leviton Receptacle Gfci 125Vac 20A 2 3 Gra 1Hp (GFNT2-GY)
Leviton Receptacle Gfci 125Vac 20A 2 3 Gra 1Hp (GFNT2-GY)

After making secure connections, gently tug each wire to confirm it is tight. Then mount the Leviton 13351 to the fixture using its 1/8 IP cap or threaded shell, depending on the fixture design. Install the bulb, restore power, and test the fixture. If anything flickers, smells hot, or fails to light, turn the power off immediately and recheck the connections.

Mounting Options and Fixture Compatibility

The 13351 is commonly used in pendant, ceiling, and bracket-style fixtures that accept a 1/8 IP threaded connection. It is not a universal socket for every fixture. Some fixtures use a different cap size, a keyless socket with a hickey, or a socket with a separate bracket. Measure and compare before ordering.

AD

It is also important to respect the fixture’s location rating. Many standard lampholders are intended for dry, indoor locations. If you are working on a damp or wet location, use a fixture and socket specifically listed for that environment. The Leviton 13351 is best reserved for dry applications unless the fixture assembly is rated otherwise.

Applications, Comparisons, and Troubleshooting

The Leviton 13351 works well in closets, basements, attics, utility rooms, display cases, signs, and pendant lights. It is also common in older ceiling fixtures where the socket has failed but the housing is still in good condition. Because it is keyless, it pairs naturally with wall switches, smart switches, or remote-controlled lighting systems.

In commercial settings, keyless lampholders are often used in back-of-house areas, storage rooms, and equipment enclosures. Their simple design reduces failure points and makes replacement straightforward. For homeowners, the 13351 is a budget-friendly way to restore a fixture instead of replacing the entire light.

Leviton 13351 vs Other Lampholders

Compared with a pull-chain lampholder, the Leviton 13351 has no local switch. That is an advantage when the fixture is controlled from a wall switch, but a disadvantage if you need to turn the light on directly at the socket. Leviton offers pull-chain and turn-knob models for those situations.

Compared with a porcelain socket, a phenolic or thermoset socket may be lighter and less brittle in some residential fixtures. Porcelain is often chosen for higher-heat applications, while the 13351 is a solid general-purpose option. Match the socket material and rating to the heat, location, and bulb type you plan to use.

Troubleshooting and Maintenance

If a fixture with a Leviton 13351 does not light, check the bulb first, then the breaker, then the wiring. A loose terminal screw can cause flickering, intermittent operation, or overheating. Turn off power before tightening any connection, and replace the socket if the contacts are burned, pitted, or corroded.

Inspect older sockets for cracks, discoloration, and brittle plastic. Heat damage often leaves a brown or black residue near the center contact. If you see those signs, replace the lampholder rather than trying to clean it. Switching to an LED bulb can also reduce heat and extend the life of the socket and fixture.

For a dependable replacement socket, the Leviton 13351 remains a practical choice when you need a keyless medium-base lampholder with a proven fit. Confirm your fixture’s mounting style, wire it carefully, and choose a bulb that respects the socket’s ratings. If you are unsure about any step, bringing in a licensed electrician is the safest way to keep your lighting project moving.

AD