Larson Storm Door Closer: Common Problems & Simple Solutions
When homeowners consider door safety and accessibility, one essential component often overlooked is the door closer, especially in the case of storm doors. A faulty or improperly installed storm door closer can lead to inconveniences, security issues, and even injuries. This article delves into common Larson storm door closer problems, their causes, and potential solutions.
Larson storm door closers, like many other brands, are designed to ensure doors close safely and quietly while providing automatic closing and latching functionality. However, these closers can develop issues over time, necessitating understanding and proper maintenance to resolve problems.
Common Larson Storm Door Closer Issues
The two most prevalent problems with Larson storm door closers are slow or uneven door closing, and difficulty adjusting the closer's speed or force.



These issues can be attributed to several factors, such as improper installation, wear and tear of internal components, or incorrect adjustment. Let's explore these causes and their respective solutions under each sub-topic.
Slow or Uneven Door Closing
Slow or uneven door closing is often due to excessive door weight, excessive air pressure inside the door closer, or a worn-out pneumatic cylinder.



Solution: To resolve this issue, first check the door's weight and make sure it's balanced. If the door is too heavy, consider installing a heavier-duty closer or adjusting the closer's arm to increase its mechanical advantage. Next, bleed excess air from the closer by opening the bleeder valve and slowly closing the door until it closes at the desired speed. If the pneumatic cylinder is worn out, it will need to be replaced.
Difficulty Adjusting Closer Speed or Force
Problems adjusting the closer's speed or force often stem from a faulty adjustment screw, a broken adjustment arm, or improper adjustment technique.
Solution: Firstly, ensure you're using the correct tool for adjustment - usually a flathead screwdriver. If turning the adjustment screw is difficult or has no effect, the arm might be broken, or the adjustment screw might be stripped. In these cases, the entire closer might need replacement. To adjust the closer's force, turn the screw clockwise to increase force and counter-clockwise to decrease it. For adjusting the speed, turn the screw clockwise to slow the door and counter-clockwise to speed it up.






Preventative Maintenance for Larson Storm Door Closers
Regular maintenance can significantly extend the lifespan of your Larson storm door closer and prevent problems from occurring.
One key maintenance task is lubricating the closer's pivot points and adjustment arm using a light machine oil. This helps reduce friction and wear, ensuring smooth operation. Additionally, periodically check for any signs of wear or damage, and clean the closer to remove any dirt or debris that could cause issues.
Inspecting and Replacing Internal Components
Over time, internal components of the door closer may wear out and need replacement. Inspect the closer periodically, paying close attention to the piston, cylinder, and other moving parts for signs of damage or wear.

Replace worn-out parts as soon as possible to prevent the entire closer from failing. Consult your closer's manual or manufacturer's website for information on purchasing replacement parts and their installation.
Regular maintenance and prompt attention to any arising issues can help ensure your Larson storm door closer operates smoothly and efficiently for years to come. If you're unsure about any aspect of troubleshooting or maintenance, don't hesitate to consult a professional technician for assistance.



