langstroth frame plans

Free Langstroth Frame Plans: Build Your Own Beehive Frames Easily

By Amanda Smith
AD

Langstroth frame plans are the difference between a hive that hums with orderly comb and one that turns into a sticky maze of burr comb and cross-comb. Whether you are building new frames for a growing apiary or replacing worn-out equipment, having accurate plans lets you create frames that fit standard Langstroth boxes, respect bee space, and stand up to the weight of honey and brood.

A good set of plans does more than list measurements. It teaches you how the top bar, end bars, and bottom bar work together, why a few millimeters matter, and how to adapt the same basic design for deep brood chambers, medium supers, and shallow honey boxes. With the right guidance, even a beginner woodworker can produce durable frames at a fraction of the cost of buying them pre-assembled.

Decoding Langstroth Frame Plans and Critical Measurements

At first glance, a Langstroth frame looks like a simple wooden rectangle. In practice, it is a precision-fit component inside a hive that must accommodate bees, foundation, and the weight of honey. Frame plans break the assembly into four main parts: the top bar, two end bars, and the bottom bar. Each part has a specific length, width, and thickness that keeps the frame square and compatible with standard hive bodies.

AD
DIY Beehive Plans - Langstroth 10-frame - Beekeeping DIY Bee Hive Instruction Manual - Etsy
DIY Beehive Plans - Langstroth 10-frame - Beekeeping DIY Bee Hive Instruction Manual - Etsy
Eight-Frame Langstroth Hive Project Plan
Eight-Frame Langstroth Hive Project Plan
Cut List for Langstroth Frames | dummies
Cut List for Langstroth Frames | dummies

The most common mistake in DIY frame building is treating dimensions as approximate. A top bar that is too long will not fit the frame rest, while a short bottom bar can pull the end bars inward and twist the frame. Plans also account for bee space, the narrow gap bees use as a passageway. When that gap is wrong, bees fill it with propolis or build burr comb, making inspections difficult and reducing hive efficiency.

Standard Dimensions for Deep, Medium, and Shallow Frames

Standard Langstroth frames share the same top bar length of about 19 inches, but their height changes with the box type. Deep frames, used in brood chambers, are typically 9 1/8 inches tall. Medium frames are 6 1/4 inches tall, and shallow frames are 5 3/8 inches tall. The end bars for each size must match the box depth, or the frames will sit too low or protrude above the box.

Client Challenge
Client Challenge
Build It Yourself - Equipment Plans in PDF format
Build It Yourself - Equipment Plans in PDF format
Langstroth Hive Frames Dimensions And Plans 2025
Langstroth Hive Frames Dimensions And Plans 2025

A typical plan lists the top bar at 19 inches long, 1 inch wide, and 3/8 inch thick. The bottom bar is often 17 3/4 inches long, 3/4 inch wide, and 3/8 inch thick. End bars are usually 3/8 inch thick and 1 1/8 inches wide, with height varying by frame type. These measurements create an outside frame dimension that slides into the hive body while leaving the correct bee space at the sides and top.

Understanding Bee Space in Frame Design

Bee space is the gap bees naturally leave open, usually between 1/4 inch and 3/8 inch. If a gap is smaller, bees seal it with propolis. If it is larger, they build comb in the empty space. Frame plans are designed around this principle so that the space between adjacent combs, and between the outer frame and the hive wall, remains within the acceptable range.

AD

Self-spacing frames, such as Hoffman-style end bars, include shaped shoulders that keep frames at a consistent center-to-center distance. Straight end bars rely on the beekeeper to space them correctly. When studying Langstroth frame plans, look for details on spacer shoulders, frame rests, and bottom bar clearance. These small features have a major impact on how easily you can remove frames during an inspection.

How to Make Tricky Cuts for Side Bars of Langstroth Frames | dummies
How to Make Tricky Cuts for Side Bars of Langstroth Frames | dummies
the diagram shows how to build an entertainment center
the diagram shows how to build an entertainment center
Rámik do úľa Langstroth
Rámik do úľa Langstroth
a drawing of the bottom drawer for an end table with measurements and measurements on it
a drawing of the bottom drawer for an end table with measurements and measurements on it
Langstroths made simple, with free plans on 8 frame and 10 frames.
Langstroths made simple, with free plans on 8 frame and 10 frames.
the drawing shows an image of a door frame with measurements and measurements for each section
the drawing shows an image of a door frame with measurements and measurements for each section

Choosing Materials, Tools, and Hardware for DIY Frames

The best frame plans are only as good as the materials used to build them. Frames live inside a warm, humid hive, support heavy combs, and are handled repeatedly. Wood that warps, splits, or rots will shorten the life of the frame and frustrate you every time you open the hive. Choosing the right species, moisture content, and hardware is just as important as cutting accurate angles.

You do not need a full woodshop to build frames, but a few reliable tools make the job faster and more precise. A table saw or miter saw, a good square, a drill or nail gun, and a jig for repetitive cuts will improve consistency. Buying or building a simple frame assembly jig can also keep end bars aligned while glue and fasteners set.

AD

Wood Selection and Moisture Considerations

Pine is the most common wood for Langstroth frames because it is affordable, lightweight, and easy to work. Cypress and cedar are more rot-resistant but cost more and can be harder to source in frame-ready dimensions. Avoid pressure-treated lumber, which can contain chemicals unsuitable for bee habitats. Also reject boards with large knots, checks, or severe warping.

Moisture content matters more than many beginners expect. Kiln-dried wood with a moisture content around 8 to 12 percent is ideal. Wet wood shrinks as it dries, which can loosen joints and twist frames. Store lumber indoors before cutting, and let assembled frames acclimate in a dry space before installing foundation or placing them in the hive.

Fasteners, Glue, and Foundation Supports

Exterior-grade wood glue, such as a waterproof polyurethane or cross-linking PVA, adds strength to every joint. Galvanized or stainless steel nails, brads, and staples resist rust in the damp hive environment. Many builders use a combination of glue and nails, or glue and stapling, to create a frame that stays tight through years of lifting and prying.

AD

Foundation choice affects the hardware and bar profiles in your plans. Wax foundation usually needs a wedge top bar and a grooved or split bottom bar. Plastic foundation may require a specific groove or snap-in design. Foundationless frames often use a starter strip, wire, or fishing line for support. Check your plans against the foundation you intend to use before cutting all the parts.

Step-by-Step Assembly and Customization of Langstroth Frame Plans

Once you have a cut list and the right materials, assembly becomes a rhythm. The goal is to build frames that are square, rigid, and identical enough to hang evenly in the hive. Small variations add up, especially when you build dozens of frames for multiple boxes. A consistent process saves time and prevents frustrating fit issues later.

Start by organizing parts by size and type. Deep, medium, and shallow end bars look similar, so keep them separated. Set up a flat assembly surface and a jig if you have one. Pre-drill holes where needed to prevent splitting, apply glue sparingly but completely, and fasten each joint securely without crushing the wood.

Cutting and Assembling End Bars, Top Bars, and Bottom Bars

Cut all end bars to the correct height for your frame type. If you are using Hoffman-style plans, cut the angled shoulders that create self-spacing. Top bars may be flat, wedged, or grooved depending on foundation. Bottom bars may be solid, split, or grooved. Label each pile so you do not mix deep end bars with medium or shallow ones.

For assembly, attach the top bar to both end bars first, keeping the frame square. Then fit the bottom bar between the end bars and fasten it. Use a square to check the corners before the glue sets. Nail or staple through the top bar into the end bars, and through the end bars into the bottom bar. If the frame twists, apply gentle pressure and re-check the square before adding more fasteners.

Customizing for Foundationless, Wax Foundation, and Plastic Foundation

Foundationless frames let bees build natural comb, but they need extra support. Plans for these frames often call for a thin starter strip along the top bar and horizontal wire or fishing line across the frame. The bottom bar may be left plain or fitted with a support pin. This style gives bees freedom to build worker-sized cells but requires careful handling until the comb is attached.

Wax foundation plans typically use a wedge top bar that holds the foundation sheet, plus a grooved bottom bar that captures the lower edge. Plastic foundation may slide into a grooved frame or snap into a specially shaped top and bottom bar. Each option changes the cut list slightly, so choose your foundation before cutting. If you plan to mix styles, build separate batches to avoid confusion and mismatched parts.

With a well-organized set of Langstroth frame plans, you can turn inexpensive lumber into dependable hive components that fit your boxes, support your bees, and simplify every inspection. Start with a small batch, test the fit in an empty hive body, and refine your jig or cut list before scaling up. The more familiar you become with the dimensions and assembly process, the more confident you will be in building frames that serve your apiary for many seasons.

AD