Step-by-Step Kwikset Closet Door Handle Installation Guide
Upgrading your closet doors with Kwikset handles can enhance security, style, and functionality. If you're a homeowner looking to install Kwikset closet door handles, you've come to the right place. This step-by-step guide will walk you through the process, ensuring a smooth and successful installation.
The Kwikset brand is known for its quality and durability, and by following this guide, you'll soon enjoy the benefits of their closet door hardware in your home. Let's dive into the world of DIY and get your closet doors looking and functioning at their best.
Gathering Tools and Materials
Before you start, ensure you have all the necessary tools and materials for a hassle-free installation.



Here's a list of what you'll need:
- Kwikset closet door handle set
- Screwdriver (Phillips or flathead, depending on your handle set)
- Drill (optional, for predrilling holes)
- Tape measure
- Pencil
- Painter's tape
- Level
Choosing the Right Hardware
Before purchasing, double-check that your Kwikset closet door handle set is compatible with your door type (standard, bifold, or sliding).



Measure your door thickness to ensure the set's backsets align with your needs. Most standard doors are 1¾ inches thick, requiring an 2⅜-inch backset. However, measure to be certain.
Determining Handle Placement
Use painter's tape to mark the center of your door, both vertically and horizontally. This marks the center of your handle set.
Measure out from the center on both sides, using the handle set's template or the included instructions to find the perfect spot for your handle.






Removing the Old Hardware
Before you can install the new Kwikset handles, you need to remove the old hardware.
Using the appropriate screwdriver, remove the screws holding the old handle and striker plate in place. In some cases, you may need to drill out the screws if they're stripped or damaged.
Preparing the Door
With the old hardware removed, use your drill to create a pilot hole in the center of where each new screw will go. This helps prevent the wood from splitting when you install the new screws.

Test the fit of your new Kwikset handle, ensuring it aligns properly with the predrilled holes. Make any necessary adjustments before proceeding with the installation.
Installing the Faceplate and Handle
Position the faceplate on the door, aligning it with your pilot holes. Use your screwdriver to attach the faceplate to the door, ensuring the screws are finger-tight. Be careful not to overtighten, as this can cause stripped screws or damaged hardware.
Insert the handle into the faceplate, lining up the hinge side of the handle with the hinge on your door. Secure the handle to the faceplate using the provided screws, again being careful not to overtighten.
Installing the Latch and Striker
With the handle and faceplate installed, it's time to install the latch and striker plate to complete the setup.
Position the latch on the edge of your door, ensuring the latch hole aligns with the pilot hole you predrilled earlier. Secure the latch with a screw, making it finger-tight.
Installing the Striker Plate
The striker plate should be mounted on the door jamb, in line with the latch. Use your level to ensure the striker plate is plumb and level, then mark the screw holes.
Drill pilot holes, then attach the striker plate using the included screws. Once the striker plate is secure, test the operation of your new Kwikset closet door handle to ensure it's functioning smoothly.
Congratulations! You've successfully installed your new Kwikset closet door handles, enhancing both the security and style of your closets. Now that you've experienced the ease of DIY, consider upgrading more hardware around your home to further personalize your living space.





