KitchenAid Natural Gas Conversion Kit: Easy Step-by-Step Guide
If you own a KitchenAid gas grill, you already know it is built for serious backyard cooking. What many owners do not realize is that the same grill can often run on natural gas instead of propane with the right KitchenAid natural gas conversion kit. That single change can eliminate tank swaps, reduce refill runs, and keep your cookout going without interruption.
But converting a KitchenAid grill from propane to natural gas is not as simple as swapping a hose. The fuel types burn differently, the orifices are sized differently, and the regulator and connection hardware must match your home’s gas supply. Choosing the correct kit and installing it properly is the difference between a reliable grill and a dangerous one.
Understanding the KitchenAid Natural Gas Conversion Kit
A KitchenAid natural gas conversion kit is a model-specific package of parts that changes a propane grill to natural gas operation. It typically includes natural gas orifices for the main burners and any side, sear, or rotisserie burners, plus a regulator or hose assembly designed for natural gas pressure. Because KitchenAid has produced many grill models over the years, there is no single universal kit that fits every unit.
The conversion works by changing how gas enters the burner. Propane is denser and carries more energy per cubic foot, so propane orifices are smaller. Natural gas needs a larger orifice to deliver the same cooking performance. If you simply connect natural gas to a propane grill without changing the orifices, the burners will run poorly, produce weak flames, or create dangerous incomplete combustion.
What Comes Inside a KitchenAid Natural Gas Conversion Kit
Most authentic kits contain a set of brass orifices, a natural gas hose, and the correct regulator or quick-disconnect fitting for the grill model. Some kits also include new burner tubes, air shutters, or a conversion label that tells future owners the grill has been modified. The exact contents depend on the KitchenAid model number and the burner configuration.
You may also receive detailed instructions with torque specs, orifice sizes, and leak-testing steps. If you buy a third-party kit, compare every part to the manufacturer’s list. Missing a single orifice for a side burner or sear burner can leave that section unusable or unsafe. Always prioritize a kit that explicitly lists your KitchenAid model and serial number range.
How to Confirm Model Compatibility Before You Buy
Start by locating the rating plate on your grill, usually on the back panel, under the side shelf, or inside the cabinet door. Write down the full model number and serial number. Then search the KitchenAid parts catalog or contact customer support to find the approved natural gas conversion kit for that exact model. A kit that fits a similar-looking grill may not fit yours.
Compatibility also depends on your home’s gas supply. You need a natural gas line with a shut-off valve near the grill, adequate pressure, and enough volume to feed all burners at once. If your gas line is undersized or the pressure is low, even the correct kit will underperform. A licensed gas fitter can confirm your supply before you purchase the kit.
Installing and Maintaining Your KitchenAid Natural Gas Conversion Kit
Installation involves more than turning a wrench. You must shut off the gas, remove the old propane regulator and hose, replace the orifices, install the natural gas connection, and leak-test every joint. Because natural gas is odorless until an odorant is added, a small leak can go unnoticed without proper testing. For that reason, many manufacturers recommend professional installation.
After conversion, your grill should burn with a steady blue flame and minimal odor. You may notice slightly different heat response because natural gas produces less heat per cubic foot than propane. The burners may take a moment longer to reach searing temperature, but with the correct orifices the grill should still deliver the performance KitchenAid intended.
Step-by-Step Installation Overview
First, disconnect the propane tank and remove the old hose and regulator. Remove the cooking grates, heat plates, and burners to access the orifices. Unscrew each propane orifice and replace it with the corresponding natural gas orifice from the kit. Keep the old parts in a labeled bag in case you ever need to convert back or move to a propane setup.
Next, install the natural gas hose and regulator or quick-disconnect assembly according to the instructions. Connect to the house gas line with an approved shut-off valve. Turn the gas on slowly, then perform a soapy water leak test on every connection. Finally, light each burner individually and check the flame color, height, and stability before closing up the grill.
Safety Checks, Leak Testing, and Long-Term Care
Leak testing is non-negotiable. Mix dish soap with water, brush it on every gas connection, and watch for bubbles. Bubbles mean escaping gas. Tighten the fitting or replace the seal, then test again. Never use a lighter or match to check for leaks. If you smell gas at any point, shut off the supply and call a professional.
Once the grill is running, inspect the flames monthly. A healthy natural gas flame is mostly blue with a slight yellow tip. If the flame is large, yellow, or lifting off the burner, the air shutter may need adjustment or the orifice may be the wrong size. Clean the burners and orifices annually, keep the grill covered, and schedule a gas appliance check every few seasons to stay safe and efficient.
Converting your KitchenAid grill to natural gas can transform your outdoor kitchen into a cleaner, more convenient cooking station, but the details matter. Take the time to verify your model, use the approved conversion kit, and treat every connection as a safety-critical component. When you get it right, you can fire up the grill on a whim, skip the propane runs, and enjoy years of reliable backyard meals with family and friends.