Diy Kayak Rod Holders: Build & Fish Like A Pro
Embarking on a fishing journey while kayaking is an incredible way to connect with nature and chase the thrill of the catch. A crucial aspect of this experience is ensuring your rod is secure and within easy reach. Rather than shelling out for expensive store-bought kayak rod holders, consider the satisfaction and cost-effectiveness of making your own. Here's a comprehensive guide to creating your own DIY kayak rod holders.
Before we dive into the construction process, it's essential to understand the materials and tools required. By gathering the right items, you'll set yourself up for a successful DIY project. Plus, having everything at hand will make the process more enjoyable and efficient. So, let's kickstart by exploring the necessary materials and tools.
Materials and Tools for DIY Kayak Rod Holders
The beauty of DIY projects lies in their adaptability – you can tailor them to your specific needs. To get started, collect the following materials and tools:



Materials
- Plastic tubing (1/2" or 3/4" diameter) – For constructing the main body of the rod holder
- Bungi cords or shock cords – To secure the rod and provide elasticity
- Rod eyebolts (1/4"-20, 1/2"-13, or 5/16"-18) – For attaching the rod holder to your kayak
- Nylon Tie-Wraps or cable ties – To reinforce the final product
- Epoxy or PVC cement – For adhering the tubing together
Tools
- Hacksaw or utility knife – For cutting the tubing and plastic ties
- Drill and drill bits ( matching the size of your bolts) – For creating holes in the plastic tubing
- Tape measure or ruler – For accurate measurements and precision
- Plier or wire stripper – For manipulating the bungi cords
Now that you've gathered your essentials, let's delve into the construction process. We'll break it down into simple steps to ensure you master the art of creating DIY kayak rod holders.
Constructing DIY Kayak Rod Holders: Step-by-Step
Armed with your materials and tools, follow these step-by-step instructions to create your perfect kayak rod holders:



Step 1: Measure and Cut the Tubing
Using your tape measure or ruler, determine the length you desire for your rod holder. A standard length is around 6-8 inches, but adjust based on your kayak and fishing rod size. Once you've settled on a length, measure and mark the tubing, then carefully cut it using your hacksaw or utility knife.
Step 2: Create the Hole for the Eyebolt
Measure and mark the center of your cut tubing. Using a drill bit matching the size of your eyebolt, create a hole at the mark. Be cautious when drilling to avoid cracking the plastic. Drill slowly and steadily, applying gentle pressure.
The next step involves fitting the eyebolt into your newly created hole. To do this, you'll need to remove the nut and thread the eyebolt through the tubing. Secure the eyelet side to the inside of the tubing using a thin washer or a piece of tubing to prevent it from spinning.






Step 3: Assemble the Rod Holder
With the eyebolt in place, insert the bungi cord into the tubing. Ensure the cord is long enough to wrap around the outside of the rod holder and secure the fishing rod. You can adjust the length based on your preference by cutting and tying the excess cord.
Once you've positioned the bungi cord, apply epoxy or PVC cement to the cut ends of the tubing and carefully join them together over the bungi cord. Hold the pieces together for a few seconds to ensure they bond correctly. If desired, reinforce the connection using nylon tie-wraps or cable ties.
Attaching DIY Kayak Rod Holders
With your rod holders fabricated, it's time to mount them onto your kayak. Choose locations that offer easy access to your rods without compromising stability. Common spots include the sides or the stern (rear) of the kayak.

Using your drill and a bit matching the size of your rod eyebolts, create holes in the kayak at your chosen locations. Be sure to drill through the hull, spray deck (if applicable), and inner wall to accommodate the eyebolt and nut. Insert a washer or piece of tubing into the hole to create a snug fit for the eyebolt.
Step 1: Install the Eyebolt
Insert the eyebolt through the kayak hole from the inside out. Ensuring the eyelet faces the direction where you'll mount your rod holder, thread the bolt through the washer or tubing and secure it with a nut. Tighten the nut using a wrench or pliers to create a snug fit.
Step 2: Attach the Rod Holder
Position the rod holder eyebolt over the kayak eyebolt and secure it using the nut provided with your rod holder. Tighten the nut to keep the rod holder firmly in place. You may want to reinforce the connection using nylon tie-wraps or cable ties.
There you have it! Your very own DIY kayak rod holders, ready to keep your fishing rods secure and within reach during your aquatic adventures. As you embark on your journeys, you'll appreciate the comfort and convenience they provide – and the satisfaction of having built them yourself.
Embrace the process of crafting your kayak rod holders, and don't hesitate to customize them to suit your preferences. With practice, you'll improve your skills and create more innovative and functional pieces to enhance your fishing experience. Safe paddling!





