John Deere 71 Planter Plate Chart: Find the Right Seed Plate Fast
The John Deere 71 planter plate chart is a compact reference that can make or break a planting day. If you are running a 71 Flexi Planter, the chart connects the crop you want to plant with the seed plate, cell size, and sprocket combination that should get you close to your target population. Without it, you are guessing at plate selection, and guessing with mechanical planters usually shows up later as skips, doubles, or a seed bill that does not match the stand in the field.
Reading the chart well requires more than finding "corn" or "soybeans" and moving on. Seed size, shape, test weight, plate wear, row spacing, and drive sprocket ratios all change the final seed drop. The chart is a baseline, not a guarantee. This guide explains how the John Deere 71 planter plate chart is organized, how to match plates to seed, and how to calibrate the planter so the chart works in your actual field conditions.
Understanding the John Deere 71 Planter Plate Chart
The John Deere 71 planter plate chart is designed around the mechanical seed plate system used on 71 Flexi Planters and similar older John Deere units. Each plate has cells that capture individual seeds and release them at the right moment as the plate rotates over the seed tube. The chart lists the plate numbers or plate families that typically work for a crop, along with notes about seed size and sometimes the sprocket settings needed for a target population.
Because the 71 planter was built for many years and sold in many configurations, you will find more than one version of the chart. Some charts focus on corn and soybeans, while others include sorghum, sugar beets, sunflowers, and specialty crops. Part numbers and plate names can also vary between original John Deere plates, aftermarket plates, and replacement plates made by other suppliers. Always confirm the chart version matches your planter and plate inventory.
What the Columns and Codes Actually Mean
A typical John Deere 71 planter plate chart includes columns for the crop, seed size or grade, plate number, number of cells, and recommended sprocket combinations. The plate number is not random. Letters and numbers usually indicate the plate family, cell size, cell shape, and sometimes the plate thickness. For example, a plate intended for large flat corn will have larger cells than a plate for small round corn or sorghum. The cell count affects how many seeds are released per revolution of the plate.
Sprocket columns are just as important as the plate number. The chart may list an upper drive sprocket and a lower driven sprocket, or it may show a sprocket ratio. That ratio controls how fast the seed plate turns relative to the planter drive wheel. Change the sprockets, and you change the population without changing the plate. This is why two farmers can use the same plate and get different stands if their sprocket setups and row spacings are different.
Matching Seed Size to Plate Cell Size
Seed size is the single biggest reason a plate chart can fail if you ignore it. Corn is sold as flat, round, or a mix, and sizes range from small to large within those shapes. A plate cell that is too small will crack or pop seeds, while a cell that is too large will pick up doubles or let seeds roll around and drop late. Soybeans are even more variable because seed size changes with variety and growing conditions. The chart gives you a starting plate, but the seed tag and a hand sample tell you whether that plate is realistic.
To match seed to plate, pour a small sample on a clean surface and look at the average seed. For corn, compare the width and thickness of several kernels. For soybeans, notice whether they are small, medium, or large rounds. For sorghum and other small seeds, look for uniformity and avoid plates with cells that are obviously too deep. If the chart lists more than one plate for your crop, choose the one that best fits the majority of the seed lot, then test it before planting the whole field.
How to Use the John Deere 71 Planter Plate Chart for Calibration and Population
Once you have a plate candidate, the John Deere 71 planter plate chart becomes a calibration tool. The chart gives you a starting sprocket combination for a target population, but that number assumes specific row spacing, drive wheel size, and seed size. Your planter may have different tires, different sprockets, or a different row width. Treat the chart as a recipe that needs tasting before you serve it to the whole field.
Calibration begins with knowing your goal. If you want 32,000 corn plants per acre in 30-inch rows, you need to calculate seeds per foot of row and then match that to plate revolutions. The chart shortcuts some of that math, but you still need to verify the actual drop. Germination percentage, seed treatment, field conditions, and mechanical slip can all change the final stand. A chart that says "approximately 32,000" is not the same as a planter that is actually dropping 32,000.
Sprocket and Drive Combinations for Target Populations
Sprocket combinations are the transmission of the planter. The drive wheel turns, and a chain transfers that motion to the seed plate. By changing the size of the upper and lower sprockets, you change the number of plate revolutions per drive wheel revolution. More plate revolutions mean more seeds per foot. The John Deere 71 planter plate chart usually lists combinations for common row spacings and populations, but the same combination can produce different results if your drive tire is a different size or your row spacing is not standard.
For example, a chart might show one sprocket pairing for 30-inch rows and another for 36-inch rows. If you switch from 30-inch to 36-inch rows, you need fewer seeds per foot to maintain the same population per acre, so the sprocket ratio must change. Likewise, if you are planting a small-seeded crop and want a lower population, you may need to slow the plate down rather than change to a smaller cell. Always write down your final sprocket settings and plate numbers so you can repeat the setup next season.
Field Calibration Checks and Crop-Specific Tips
Before you plant a field, run a static calibration check. Fill the hopper, select the plate and sprockets from the chart, and turn the drive wheel by hand or with a slow drill while catching seed from one row. Count the seeds for a known distance or number of wheel revolutions. Compare that count to your target. If the count is high, slow the plate down with sprockets; if it is low, speed it up. Look at the seed in the catch pan for cracks, doubles, and skips. That quick test reveals more than the chart alone ever can.
Crop-specific tips matter here. Corn usually needs a plate that handles flat or round seed without cracking, and population is often adjusted with sprockets. Soybeans benefit from a plate that singulates well because doubles can reduce yield and waste seed. Sorghum and small grains need smaller cells and slower speeds to avoid bridging. For food plots and specialty crops, the chart may only get you in the neighborhood. Test a short pass, dig behind the planter, and measure seed spacing before committing to the whole plot.
Keep your John Deere 71 planter plate chart with your manual, but keep a notebook with it. Record the plate number, sprocket settings, seed variety, seed size, and actual field results for every crop you plant. Over a few seasons, that notebook becomes more valuable than any generic chart because it reflects your soil, your seed, and your planter. Start with the chart, verify with calibration, and let the stand you see at emergence guide the next adjustment.