Interior Door Knob Hole Location: A Comprehensive Guide
Ever wondered where to place your door knob and strike plate while installing an interior door? The positioning of these components can greatly impact the functionality and visual appeal of your door. This guide will walk you through the optimal interior door knob hole location, ensuring a perfect fit and easy operation.
Proper installation begins with understanding the anatomy of your door. The standard interior door is 32 or 36 inches wide and 80 inches tall. The door knob and strike plate should be placed in relation to these dimensions to ensure smooth operation and a pleasing aesthetic.
The Standard Interior Door Knob Height
When measuring for your door knob, the most important consideration is the distance from the floor to the center of the doorknob. Known as the centerline, this should typically be 34 to 38 inches from the floor. This range allows for comfortable reach by most people, while avoiding knee or shin level, where it could cause injury.

![10 Different Parts of a Doorknob and Door Lock [With Diagram] - DailyHomeSafety](https://i.pinimg.com/736x/16/24/86/162486c3c718d69239c7670724815396.jpg)

As a general rule of thumb, the centerline should be 36 inches from the floor. This height accommodates most users, including those in wheelchairs or using walkers. However, if your door is in a kitchen or bathroom, you might want to consider a slightly higher centerline to avoid accidental elbow bumps at the sink or countertop.
Tips for Measuring Centerline Height
Before you begin measuring, make sure your door is properly hung and fully open, perpendicular to the jamb. Using a tape measure, start at the floor and measure vertically up the door jamb to the desired centerline height. Mark this spot with a pencil or small piece of masking tape.



To ensure your measurement is accurate, recheck it with the door closed. The centerline should align with the center of your door knob or lever when the door is closed.
Placing the Door Knob and Strike Plate
Once you've determined the centerline, you can mark and drill the holes for your door knob and strike plate. The door knob hole should be drilled at the centerline mark, while the strike plate hole should be on the opposite side of the door, at the same height.
To ensure precision, use a jig or template designed for this purpose. These tools guide your drill bit, making it easier to create perfectly aligned and sized holes.






Marking the Strike Plate Location
The strike plate is typically placed 11/8 inches from the edge of the door jamb. Mark this spot on the jamb, ensuring it aligns with the centerline on the door's face. This placement allows the latchbolt to catch correctly when the door is closed.
Once marked, you can use a jig or template to drill the hole for the strike plate. Be sure to drill into the door jamb's face, not the edge, to ensure a strong and secure installation.
Handling Unusual Door Sizes
While the above dimensions are standard, it's not uncommon to encounter doors that don't quite fit this mold. For example, pocket doors or oversized doors may require adjustments to the centerline or strike plate placement.

If your door is wider than typical, you may need to adjust the placement of the knob and strike plate to ensure proper latching. For very wide doors, you might even need a multi-point locking system with additional latches.
Always measure carefully and consider the unique dimensions of your door when installing hardware. Proper placement of your door knob and strike plate ensures smooth operation and a professional finish.




