Interior Door Dimensions: The Complete Guide to Standard Sizes
Interior door dimensions are one of those details that seem simple until you are standing in a doorway with a tape measure, a door catalog, and a growing sense of doubt. A door that is an inch too wide will not fit without trimming, and one that is too narrow can leave gaps, weaken privacy, and fail to meet accessibility needs. Whether you are replacing a worn slab, framing a new wall, or remodeling a closet, understanding standard sizes and how they relate to the opening saves money and frustration.
This guide breaks down the measurements that matter most: width, height, thickness, rough opening, and clear opening. It also covers common sizes for bedrooms, bathrooms, closets, and special door types. Keep in mind that older homes, custom builds, and metric markets often stray from the familiar numbers, so measuring your actual space is always the first step.
Standard Interior Door Dimensions
In the United States and Canada, most interior doors follow a small set of nominal sizes. Widths typically range from 24 inches to 36 inches, while the standard height is 80 inches. Thickness is usually 1-3/8 inches for a hollow-core interior door and 1-3/4 inches for a solid-core or exterior door. These nominal measurements refer to the door slab, not the finished opening or the frame around it.
Actual dimensions can vary slightly by manufacturer, and the frame adds another layer of measurement. A door listed as 30 inches wide may measure 29-3/4 inches or 30 inches exactly, depending on the brand and whether it is prehung. For that reason, never assume a nominal size will match your opening without checking the product specifications and measuring the existing door or frame.
Common Widths and Where They Fit
Width is the measurement that most often determines whether a door feels comfortable and functions well. A 24-inch door is common for powder rooms, small closets, and tight hallways. A 28-inch door works well for bathrooms and laundry rooms where space is limited. For bedrooms, 30-inch and 32-inch doors are the most common choices, while 36-inch doors are often used for primary bedrooms, main living areas, and accessible routes.
As a practical example, a guest bedroom might use a 30-inch door, a primary suite might use a 32-inch or 36-inch door, and a small half-bath might use a 24-inch or 28-inch door. Closet widths vary widely: a single 24-inch door can serve a narrow linen closet, while a reach-in closet might use a 30-inch or 32-inch door. Double closets often use two 24-inch to 30-inch doors, giving a total opening of 48 to 60 inches.
Standard Heights and Thickness
The most common interior door height is 80 inches, often written as 6 feet 8 inches. Older homes may have doors that are 78 inches or 79 inches tall, and some historic properties have even shorter openings. In homes with taller ceilings, 84-inch and 96-inch doors are becoming more popular because they create a more dramatic, custom look and can make rooms feel taller.
Thickness matters for hinges, latches, and frame fit. A standard interior hollow-core door is 1-3/8 inches thick, while a solid-core interior door is often 1-3/4 inches thick. The extra thickness gives a solid-core door more weight, better sound insulation, and a more substantial feel, but it may require heavier hinges and a different latch bore. In metric markets, interior doors are commonly 35 mm or 40 mm thick, with heights such as 1981 mm and 2040 mm.
Measuring and Sizing for Installation
Before buying any door, determine whether you need a replacement slab or a complete prehung unit. A door slab is just the door panel, so it must fit an existing frame and match hinge locations. A prehung door includes the slab, frame, and often the casing, which makes installation easier when the rough opening is square and correctly sized. The measurement process is different for each option.
Always measure the opening in multiple places. Record the width at the top, middle, and bottom, and the height at the left, center, and right. Use the smallest measurement, because a door that fits the largest point may bind at the tightest point. Also check for plumb, level, and square. If the opening is significantly out of square, a prehung door may still work, but a slab replacement can be much more difficult.
Door Slab vs. Prehung Measurements
If you are replacing only the slab, measure the existing door itself. Record its width, height, and thickness, then note the hinge positions, hinge size, and backset, which is the distance from the door edge to the center of the latch hole. You will also need to know the bore hole size for the doorknob. Matching these details is essential if you want to reuse the existing frame and hardware.
For example, a common replacement slab might be 32 inches wide, 80 inches tall, and 1-3/8 inches thick with three 3.5-inch hinges. If the new slab is slightly larger, it may be trimmed, but hollow-core doors usually allow only about 1/4 inch to 1/2 inch of trimming on each side, and solid-core doors may allow more. A prehung door, by contrast, is specified by its rough opening. A 32-inch by 80-inch prehung door often needs a rough opening of about 34 inches by 82.5 inches, but you should always confirm the manufacturer’s requirements.
Rough Opening and Clearance Considerations
The rough opening is the framed gap in the wall before the door unit is installed. It must be larger than the door slab to allow room for the jamb, shims, insulation, and adjustments. The clear opening is what you actually walk through after the door, stops, and hinges are in place. A 32-inch door might provide a clear width of roughly 30 to 31 inches, depending on the stop and hinge configuration, which is an important distinction for wheelchairs, walkers, and furniture movement.
Flooring also affects door height. If you are installing thick tile or hardwood, the finished floor may be higher than the old surface, so the door may need to be raised or trimmed at the bottom. A swinging door needs clearance above the floor to avoid rubbing, while a pocket door needs a cavity wide enough for the panel to slide completely inside the wall. For a pocket door, the rough opening is typically about twice the door width plus extra space for the hardware and frame.
Special Door Types and Regional Variations
Not every interior door is a single swing door, and not every project follows the same dimensional standards. Double doors, French doors, sliding barn doors, pocket doors, and bifold closet doors all have unique sizing rules. Each type changes the relationship between the opening, the door panel, and the hardware, so you cannot simply apply the standard width and height chart to every situation.
Regional standards also matter. The United States and Canada generally use imperial measurements, while the United Kingdom, Europe, and many other regions use metric sizes. Building codes and accessibility guidelines can further influence the minimum door width, especially in commercial buildings, accessible housing, and public accommodations. Knowing which standard applies to your project prevents ordering errors and failed inspections.
Double, Sliding, and Pocket Door Dimensions
Double doors use two door slabs that meet in the middle. A typical double-door opening might be 60 inches wide with two 30-inch doors, or 72 inches wide with two 36-inch doors. French doors follow similar sizing but include glass panels and may require more precise framing. For a double door, the total width is divided between the two panels, and the rough opening must account for the frame, clearance, and any astragal or meeting stile in the center.
Sliding barn doors are measured differently because the panel hangs outside the wall and slides along a track. The door panel should be wider than the opening, often by 4 to 6 inches total, so it can cover the opening completely when closed. A pocket door uses a standard slab but hides inside the wall, so its rough opening must be roughly twice the door width plus a few inches for the pocket hardware. Bifold doors are sized by the total opening width and usually come in pairs or sets of panels that fold to the side.
Metric and Accessibility Standards
In metric markets, common interior door widths include 626 mm, 726 mm, 826 mm, and 926 mm, though exact availability varies by country. Heights are often 1981 mm or 2040 mm, and thicknesses are commonly 35 mm or 40 mm. In the United Kingdom, you may see doors described as 2 feet 6 inches, 2 feet 9 inches, or 3 feet wide, which convert to approximately 762 mm, 838 mm, and 914 mm. These sizes serve the same basic purposes as imperial doors but do not always align with North American dimensions.
Accessibility standards add another layer. Many guidelines call for a minimum clear opening of 32 inches for an accessible route, which is often achieved with a 34-inch or 36-inch door rather than a 32-inch door. A 36-inch door provides more comfortable clearance for wheelchairs, walkers, and people carrying large items. If you are remodeling a bathroom, hallway, or entry to a main-floor bedroom, choosing a wider door now can improve long-term usability and may help you meet local accessibility requirements.
With your measurements written down and your door type selected, the next step is to compare those numbers against the manufacturer’s specifications before you place an order. Pay attention to the difference between nominal size, actual slab size, and rough opening, and do not forget to account for flooring, trim, and hardware. A few minutes with a tape measure and a notepad can save you hours of installation headaches, so measure twice, verify the product details, and choose a door that fits your space as well as your style.