IKEA Kallax Cabinet Doors Not Closing Properly: Troubleshoot & Fix Tips
Are you experiencing trouble with your IKEA KALLAX shelf unit where the doors aren't closing fully? You're not alone. This is a common issue that can be caused by a variety of factors. But don't worry, many solutions exist to fix this problem, and we're here to guide you through them.
Before we dive into the solutions, let's first understand what might be causing the issue. The KALLAX doors may not close properly due to misalignment, swelling of the wood over time, or incorrect assembly. Now, let's explore how to address these problems.
Checking and Adjusting Door Alignment
Improper door alignment is often the culprit behind doors not closing all the way. Fortunately, this is an easy issue to fix.



First, ensure the doors are hanging straight and aligned with the frame. Tilt the shelf slightly forward to gain better access to the hinges. Use a screwdriver to loosen the screws slightly, realign the door, and then retighten the screws. If necessary, repeat this process for all four doors.
Adjusting Horizontal Alignment
If the doors aren't aligned horizontally, you might need to adjust the shelf's levelers. Tilt the shelf again and adjust the levelers one at a time until the doors hang evenly.



Keep in mind that even if the doors look perfectly aligned, there could still be a slight discrepancy due to the design of the KALLAX unit. Therefore, some fiddling might be required to find the optimal alignment.
Adjusting Vertical Alignment
For the doors to close fully, they need to be in the same vertical plane. To adjust this, you can use a thin piece of wood or a playing card behind the hinge to elevate the door slightly.
Insert the card or wood piece gradually, testing the door's closure after each addition until the door closes fully. Remove the card or wood once the door is correctly aligned.






Dealing with Wood Swelling
Wood furniture can swell over time due to changes in humidity, which can cause the doors to fit less well.
The best solution is to maintain a consistent humidity level in your home. However, if swelling has occurred, you can sand down the door slightly to make it fit again. Use fine-grit sandpaper and sand lightly, testing the door's closure frequently to avoid sanding too much.
Sand Down the Door
If sanding down the door doesn't work, you may need to sand down the frame instead. Just be careful not to sand too much, as this could weaken the structure.

After sanding, apply a coat of varnish or wood oil to protect the surface and prevent further swelling.
Tapping the Door
Sometimes, a simple tap on the door can help it realign and close properly. This method is particularly useful when the issue is minor misalignment due to the furniture settling over time.
Gently tap the door at the top and bottom using a mallet or a hammer wrapped in a cloth. Be careful not to damage the door. This should help adjust the door's position and enable it to close fully.
Reassembling the Hinges
If none of the above solutions work, the hinges might be incorrectly assembled. IKEA's instructions can sometimes be unclear, leading to improper assembly.
Carefully disassemble the hinges, ensuring you understand how they should fit together. Reassemble them correctly, making sure to align the door properly as you do so.
Upgrading Hinges
If reassembling the hinges doesn't work, you might need to consider upgrading to new hinges. This can be a good idea if your KALLAX unit is heavily used or if you've had trouble with the doors closing properly in the past.
IKEA sells new hinges that can be easily installed. Just make sure to align the new hinges correctly when installing.
As a final note, don't be discouraged if you have to try several solutions before the doors close fully. Each IKEA furniture piece is unique, and what works for one may not work for another. With patience and a bit of tinkering, you should be able to fix the issue and enjoy your KALLAX shelf fully functional. Happy DIY-ing!



