IKEA Besta Door Fix: Why Your Door Won't Close All the Way & Easy Solutions
Are you struggling with an IKEA Besta door that's not closing properly? You're not alone. This common issue can be frustrating, but don't lose hope. In this guide, we'll explore potential reasons behind this problem and provide step-by-step solutions to help you fix your Besta door woes.
Before we dive into the detail, let's quickly cover some common culprits. Misaligned hinges, worn-out rollers, or incorrect door size can all cause the Besta door not to close all the way. So, grab a screwdriver and let's tackle this DIY project together!
Diagnosing the Issue
Before you start dismantling your cabinet, it's essential to understand the problem. Here are two key areas to investigate:



Misaligned hinges can prevent the door from closing smoothly. The door may seem off-centre or won't close all the way. To check, observe the hinges from the inside of the cabinet. If they're not perfectly aligned with the door frame, that's likely the cause.
Inspecting the Hinges
First, ensure the hinges are securely attached to both the door and the cabinet frame. If they wobble, they might need tightening or replacing.



Check the hinge plate on the door. It should line up with the frame's hinge cup when the door is closed. If not, you may need to realign the hinges or adjust the door.
Examining the Rollers
The Besta doors use rollers to slide and close smoothly. If these rollers are damaged or worn out, they can cause the door to stick or not close properly.
Inspect the rollers at the bottom of your door. If they're making a grinding noise, wobbling, or not spinning freely, they might need to be replaced.






Adjusting the Door
Once you've identified the issue, let's dive into the solutions. We'll start with adjusting the door:
If your hinges are misaligned, you can adjust them using the screws on the face frame and the door. Loosen these screws, align the hinges, then tighten them back up.
Realigning the Hinges
For top-down adjustable hinges, use an Allen key to loosen the set screw on the hinge plate. Then, adjust the plate up or down to realign it with the frame. Once aligned, retighten the set screw.

If you have European-style hinges, you can adjust the door's angle by loosening the top hinge, aligning the door, then tightening both hinges.
Replacing Damaged Rollers
If your rollers are damaged, replacing them is a straightforward process. First, remove the screws holding the roller mechanism to the door. Then, attach the new roller and secure it with the screws.
Remember to lubricate the rollers with a bit of graphite or household oil to ensure smooth movement.
Checking the Door Size
A common overlooked reason for the door not closing properly is that the door might be too wide for the opening.
Measure the width of the door against the opening. If the door is even slightly too wide, it won't close properly. Unfortunately, if this is the case, you'll need to replace the door with one that fits correctly.
Measuring the Door
Use a measuring tape to check the door's width. Compare this to the width of the opening. Ensure the door is no wider than the opening minus the clearance needed for the door to slide smoothly (usually around 1/4").
If the door is too wide, consider visiting your local IKEA store or their website to order the correct size replacement.
Remember, patience is key when troubleshooting and fixing your Besta door. Each adjustment might not resolve the issue right away, so keep testing and readjusting until the door closes fully and smoothly. If you're still Having trouble, don't hesitate to contact IKEA's customer support or consider hiring a professional handyman.





