IKEA Alex Drawer Unit: Expert Guide on How to Build
Embarking on a DIY adventure to revamp your space? IKEA's ALEX drawers are not only stylish but also incredibly functional and easy to assemble. Let's dive into a step-by-step guide on how to build these multifunctional pieces, helping you organize your home in no time.
Before you start, make sure you have all the necessary tools and parts. IKEA includes easy-to-follow instructions in the box, but we'll break it down even further for you here.
Understanding Your ALEX Drawer Pack
First, familiarize yourself with the contents of your ALEX drawer pack. You should have all the necessary panels, shelves, hardware, and instructions. Make sure nothing is missing before you begin.



IKEA uses a system of numbers and letters to identify each part. If you find any discrepancies, don't hesitate to contact IKEA's customer service for assistance.
Gather Your Tools
Next, gather the tools you'll need for the assembly. You should have most of these already in your toolbox:



- A screwdriver (usually PH2 or PHL) that matches the one provided in the kit
- A rubber mallet
- Clamps or a helper to keep the drawer stable while assembling
Investing in Additional Tools
While not strictly necessary, investing in a few additional tools can make the assembly process smoother:
- A drill with a screwdriver bit can help speed up the assembly process
- wood glue can reinforce the joinery, especially if you plan to fill the drawers heavily
Preparing Your Workspace
Choose a spacious, flat surface to work on. Clear it of any debris or obstacles that could hinder your progress.
If you're concerned about scratches or damage to your floor, consider laying down a protective layer of cardboard or a blanket.






Assembling the Main Body
Begin by assembling the main body of the ALEX drawer. Follow the IKEA instructions for your specific model, as there can be slight variations. Most models follow these steps:
Assembling the Sides and Back
Attach the side panels to the back panel using the provided screws. Ensure the 'front' of the panels is facing inwards.
Try to keep the parts aligned as best as possible to maintain square corners.

Attaching the Bottom Panel
After securing the sides and back, attach the bottom panel using screws. Ensure it's positioned correctly with the 'front' facing down.
For extra stability, you can apply wood glue along the edges of the bottom panel before screwing it in place.
Installing the Shelves and Drawer Units
Now that the main body is assembled, it's time to install the shelves and drawer units.
Positioning the Shelves
Measure and mark where you want the shelves to go. Use the provided screws to secure them in place.
Remember, you can adjust the position of the shelves to suit your needs. IKEA provides holes at various heights for this purpose.
Installing the Drawer Units
Attach the drawer sides to the front and back panels using the provided screws. Ensure the 'front' of the panels is facing outwards.
Once the drawer sides are attached, slide the drawer into the main body of the ALEX unit, and secure it with the provided screws.
Finishing Touches and Safety Checks
After all the drawers and shelves are in place, give your ALEX unit a final check to ensure everything is secure.
If you find any screws that are too long, you can countersink them with a tool or saw them off with pliers. Be careful not to overtighten screws, as this can strip the threads.
Congratulations! You've successfully assembled your new ALEX drawers. Now, it's time to pack them with your belongings and start enjoying your newly organized space. Happy decorating!





