Husqvarna 555 XP Specs: Full Review, Power, Weight & Performance Guide
If you are comparing 60cc chainsaws for felling, limbing, and firewood, the Husqvarna 555 XP specs tell you whether this saw has the right blend of power, weight, and durability for your work. The 555 is a professional-grade platform that sits between the lighter 550 XP and the hotter 562 XP, and it has earned a following among arborists, farmers, and serious firewood cutters who want a reliable mid-size powerhead without paying for the most aggressive engine tune.
The saw is often listed simply as the Husqvarna 555, while some dealers add "XP" to highlight its pro-level construction, X-Torq engine, and commercial features. That naming detail matters less than the numbers: displacement, horsepower, bar length, chain pitch, weight, and vibration. This guide breaks down those Husqvarna 555 XP specs in practical terms so you can match the saw to your cutting conditions instead of guessing from a spec sheet.
Husqvarna 555 XP Engine and Power Specifications
At the center of the 555 XP is a 59.8 cc X-Torq engine. X-Torq is Husqvarna's stratified scavenging design, which improves fuel economy and reduces harmful exhaust emissions without sacrificing the torque that makes a chainsaw feel strong in the cut. The engine is not a high-strung racing design; it is tuned for steady, repeatable performance in real-world wood.
The published power output is typically 3.5 hp (2.6 kW) at 9,600 rpm, with an idle speed around 2,700 rpm. Those figures place the 555 in the farm-commercial and entry-level professional class. It has enough displacement to pull an 18- to 20-inch bar in many conditions, but it rewards a sharp chain and proper technique more than a smaller saw would.
Displacement, Horsepower, and RPM Range
The 555 XP uses a 59.8 cc (3.65 cu in) cylinder and piston assembly. That displacement is the same basic size class as the 562 XP, but the 555 is tuned more conservatively. Instead of chasing peak horsepower, the engine delivers usable torque through the middle of the rpm range, which is exactly where you want it when bucking logs or dropping a medium-sized tree.
With a maximum power speed of 9,600 rpm, the saw reaches its strongest output without needing to be screamed. Idle speed sits near 2,700 rpm, so the chain should stop completely when you release the throttle. The spark plug is commonly an NGK BPMR7A or equivalent, gapped around 0.020 inches (0.5 mm), and the recommended fuel mix is 50:1 with Husqvarna two-stroke oil.
Fuel System, Ignition, and Emissions
The fuel tank holds about 0.7 L (23.7 fl oz), and the bar oil tank holds roughly 0.4 L (13.5 fl oz). That oil capacity is not huge, but it is proportionate to the saw's typical bar lengths. An adjustable oil pump lets you dial the oil flow up for long bars or dry hardwood and down for shorter bars or cold weather to avoid wasting oil.
Some 555 XP variants include AutoTune automatic carburetion, which adjusts the fuel mixture for changes in altitude, temperature, humidity, and fuel quality. If your specific saw does not have AutoTune, it will still have a Husqvarna carburetor that needs occasional tuning. Air Injection centrifugal cleaning helps keep the air filter cleaner for longer, while Smart Start reduces the effort needed to pull the starter cord.
Husqvarna 555 XP Cutting Equipment and Handling Specs
Cutting equipment is where the 555 XP either feels like a workhorse or a compromise. The saw is most commonly paired with an 18- or 20-inch bar, a 3/8-inch chain pitch, and a .058-inch gauge. That combination is widely available, strong enough for limbing and bucking, and well matched to the engine's torque curve.
Handling specs are just as important as engine size. The powerhead weighs about 5.9 kg (13.0 lb) without fuel, oil, bar, or chain. Add those fluids and a 20-inch bar, and the ready-to-cut weight climbs into the 17- to 18-pound range. That is normal for a 60cc saw, but it is still a saw you should carry with good technique and take breaks from during long sessions.
Bar Length, Chain Pitch, and Gauge
Husqvarna lists the recommended bar length for the 555 XP at 15 to 20 inches (38 to 50 cm). The standard chain setup is 3/8-inch pitch and .058-inch (1.5 mm) gauge. Chain speed at maximum power is around 21.5 m/s (70.5 ft/s), which is fast enough for clean cutting as long as the chain is sharp and the depth gauges are set correctly.
For most hardwood cutting, an 18-inch bar with a full-chisel 3/8-inch chain is the sweet spot. A 20-inch bar works well in softwood or for occasional larger logs, but it will feel slower in dense hardwood if the chain is dull or the rakers are too low. Do not push the saw beyond a 20-inch bar unless you are willing to accept slower cutting and more careful oiling.
Weight, Vibration, and Operator Comfort
The powerhead weight is listed at about 5.9 kg (13.0 lb). Vibration levels are typically around 5.3 m/s² at the front handle and 7.0 m/s² at the rear handle. Those numbers are not the lowest in the professional class, but the 555 XP uses effective anti-vibration mounts and a comfortable handle layout to reduce fatigue during long cutting sessions.
Sound power is rated near 114 dB(A), and sound pressure at the operator's ear is around 104 dB(A). That means hearing protection is mandatory, not optional. Other practical features include an inertia-activated chain brake, visible fuel level, felling marks, a snap-lock cylinder cover, and a decompression valve on many versions to ease starting.
Before you commit to a 555 XP, match the saw to your wood size, cutting volume, and comfort needs. If you cut mostly firewood under 20 inches, run an 18-inch bar, and maintain your chain properly, the 555 XP can be a dependable partner for years. If you need maximum speed in large hardwood or production felling, the 562 XP or a bigger 70cc saw may be the better long-term buy. Stop by a local Husqvarna dealer, handle the saw with a bar and chain attached, and compare it side by side with the models above and below it. The best spec sheet is the one that matches the tree in front of you.