husqvarna 20 inch bar and chain

Husqvarna 20 Inch Bar and Chain: The Ultimate Cut for Power and Precision

By Jessica Rodriguez
AD

When you are cutting firewood, clearing storm damage, or felling medium-sized trees, a Husqvarna 20 inch bar and chain is a popular sweet spot between reach and control. It gives you enough length to handle larger trunks without making the saw feel unwieldy in dense brush or on limbing cuts. For many homeowners and landowners, a 20-inch setup on a Husqvarna gas chainsaw is the Goldilocks configuration: powerful enough for real work, yet balanced enough to carry all day.

But buying a replacement or upgrade is not as simple as grabbing the first 20-inch bar and chain you see. Pitch, gauge, drive link count, bar mount, and saw engine size all need to line up. Get those details right, and your Husqvarna will cut smoothly, oil properly, and hold tension. Get them wrong, and you risk poor performance, premature wear, or a chain that will not fit at all. This guide breaks down what matters so you can choose, install, and maintain the right 20-inch bar and chain for your saw.

Understanding the Husqvarna 20 Inch Bar and Chain Platform

The 20-inch measurement refers to the bar's advertised cutting length, not the total length from tip to tail. A Husqvarna 20 inch bar and chain combination is usually intended for mid-size saws in the 45cc to 60cc range, where the engine has enough torque to pull a longer chain through hardwood without bogging down. That extra length helps when bucking logs, clearing trails, or making felling cuts on trees that would be awkward with a shorter 16-inch or 18-inch bar.

AD
Husqvarna 455 Rancher 55.5-cc 20 in. Gas Chainsaw, 2-Cycle X-Torq Engine
Husqvarna 455 Rancher 55.5-cc 20 in. Gas Chainsaw, 2-Cycle X-Torq Engine
Husqvarna 3 Sp33g X-cut .325 .050 80dl 20in Chain 581643680
Husqvarna 3 Sp33g X-cut .325 .050 80dl 20in Chain 581643680
Husqvarna X-Force 450S 20 In. Rancher Gas Chainsaw
Husqvarna X-Force 450S 20 In. Rancher Gas Chainsaw

Husqvarna offers bars and chains under its own brand and through trusted OEM suppliers such as Oregon. The bar itself may be laminated or solid, with a sprocket nose or a hardnose tip. The chain may be low-kickback, semi-chisel, or full-chisel depending on the job. Each part must match the saw's drive sprocket, oiler, and bar mount, so the complete assembly works as a system rather than a random collection of parts.

Why a 20-Inch Bar Is a Versatile Choice

A 20-inch bar is often the largest practical size for a landowner saw because it still allows reasonable balance. You can limb smaller branches, buck firewood, and fell medium trees without constantly switching tools. It also gives you more reach when cutting from one side of a log, which reduces the need to reposition or bend over. For many users, that makes a Husqvarna 20 inch bar and chain the most useful all-around setup.

Husqvarna 20 Inch Bar 7.6HP 92 cc Gasoline Top-Handle Chainsaw
Husqvarna 20 Inch Bar 7.6HP 92 cc Gasoline Top-Handle Chainsaw
Husqvarna 508926180 RP20" Bar, HLN250-80 .325,.050 (Superseded to 585943280)
Husqvarna 508926180 RP20" Bar, HLN250-80 .325,.050 (Superseded to 585943280)
Husqvarna X-Force 18-in Chainsaw Bar one_size | 599303272
Husqvarna X-Force 18-in Chainsaw Bar one_size | 599303272

That said, a 20-inch bar is not ideal for every saw. If your Husqvarna is a small 40cc homeowner model, a 20-inch chain may demand more power than the engine can deliver, especially in dry oak or hickory. The saw may cut slowly, run hot, and wear the clutch and sprocket faster. Matching bar length to engine displacement is just as important as matching the chain to the bar.

Bar Mount, Pitch, Gauge, and Drive Links Explained

Pitch refers to the size of the chain's drive links and how they engage the drive sprocket. Husqvarna 20-inch bars commonly use .325 pitch or 3/8 pitch, though other sizes exist for specialty saws. Gauge is the thickness of the drive link tang that rides inside the bar groove, typically .050, .058, or .063 inch. If the gauge is too small, the chain will wobble; if it is too large, it will not fit into the bar groove at all.

AD

Drive link count is the number of links in the loop, and it must match the bar length, pitch, and sprocket. A 20-inch .325 pitch bar often uses 80 drive links, while a 20-inch 3/8 pitch bar commonly uses 72 drive links, but this can vary by model and bar profile. Bar mount is equally critical: the tail shape, mounting holes, tensioner slot, and oiler holes must align with your Husqvarna saw's crankcase. Always check the stamp on your old bar or the owner's manual before ordering.

Husqvarna X-Tough Solid RSN Chainsaw Bar 3/8 in.
Husqvarna X-Tough Solid RSN Chainsaw Bar 3/8 in.
Husqvarna Chainsaw Bar - 20"
Husqvarna Chainsaw Bar - 20"
Husqvarna 16'' Chainsaw Bar 501959256 3/8" .050" 56 DL (Superseded to 596009756)
Husqvarna 16'' Chainsaw Bar 501959256 3/8" .050" 56 DL (Superseded to 596009756)
Husqvarna Guide Bars for Chain Power Cutters
Husqvarna Guide Bars for Chain Power Cutters
Husqvarna Genuine Part 608000048 24" Chainsaw Bar HT380-84 3/8" .050
Husqvarna Genuine Part 608000048 24" Chainsaw Bar HT380-84 3/8" .050
Husqvarna 20 in. X-Cut S93G Chainsaw Chains, 0.325 in. Pitch, 0.050 in. Gauge, 80 Drive Links, 2-Pack
Husqvarna 20 in. X-Cut S93G Chainsaw Chains, 0.325 in. Pitch, 0.050 in. Gauge, 80 Drive Links, 2-Pack

How to Match a 20-Inch Bar and Chain to Your Husqvarna Saw

The safest starting point is your saw's model number and serial number. Husqvarna produces many saws that look similar but use different drive sprockets, oilers, and bar mounts. A 450 Rancher, 455 Rancher, 460 Rancher, 550 XP, and 372 XP may all accept a 20-inch bar, yet the correct chain pitch, gauge, and drive link count can differ. Checking the manual or a dealer's fitment guide prevents costly guesswork.

You can also inspect the old bar for markings. Most bars have the length, pitch, gauge, and drive link count stamped near the tail or along the side. If the old chain is still intact, count the drive links and compare them to the replacement. If the old bar is worn or unreadable, use the saw model to find the factory-recommended 20-inch setup. When in doubt, ask a Husqvarna dealer to verify the fitment before you buy.

AD

Popular Husqvarna Models and Common 20-Inch Setups

Many Husqvarna 450, 455, and 460 Rancher saws are commonly paired with a 20-inch .325 pitch, .050 gauge bar and an 80-drive-link chain. Some 3/8 pitch 20-inch setups use a 72-drive-link chain instead. Models like the 550 XP and 372 XP may use 3/8 pitch chains depending on the sprocket and intended use. These are general patterns, not universal rules, because Husqvarna has offered different configurations over the years.

Husqvarna 24 Inch Bar 7HP 92 cc Gasoline Top-Handle Chainsaw
Husqvarna 24 Inch Bar 7HP 92 cc Gasoline Top-Handle Chainsaw

For example, a firewood cutter who runs a 455 Rancher in softwood may prefer a .325 chain for smooth cutting and lower kickback. A professional using a 372 XP for felling might choose a 3/8 full-chisel chain for faster cutting in clean timber. The right choice depends on your saw's sprocket, the wood you cut, and your comfort with kickback. Verify the exact specs before ordering a Husqvarna 20 inch bar and chain.

OEM, Oregon, and Aftermarket Bar and Chain Options

Husqvarna-branded bars and chains are designed to work together and are a safe choice for factory-matched performance. Oregon is another leading manufacturer and often supplies OEM-quality bars and chains for Husqvarna saws. Aftermarket brands can offer lower prices, but quality varies widely. A cheap chain may stretch quickly, dull fast, or have inconsistent drive links that damage the sprocket.

AD

When comparing options, look for the same pitch, gauge, and drive link count as the original equipment. Consider the bar's construction, sprocket nose quality, and chain type. A laminated bar is lighter and fine for occasional use, while a solid bar resists wear better in professional applications. A low-kickback chain is safer for homeowners, while a semi-chisel or full-chisel chain cuts faster in clean wood. Choose based on your experience and the work you do most often.

Installation, Tuning, and Maintenance for a 20-Inch Setup

Proper installation is about more than making the chain fit. The bar must sit flat against the saw's mounting pad, the tensioner must engage the bar hole, and the chain must be seated correctly in the bar groove. A misaligned bar or overtightened chain can damage the sprocket, burn the bar rails, and create a dangerous kickback risk. Take a few extra minutes to install the setup correctly.

After installation, tension and lubrication keep the system alive. A chain that is too loose can derail; one that is too tight can overheat the bar and wear the crankshaft bearings. Bar oil must flow freely to the bar groove and chain links. Check the oiler hole and groove for sawdust or pitch buildup. Clean components last longer and cut more consistently.

Installing and Tensioning the Bar and Chain

Start with the saw turned off and the chain brake engaged. Remove the side cover and old bar and chain. Clean the mounting area, oiler hole, and bar groove. Place the new chain in the bar groove with the cutters facing forward on top of the bar, then loop the chain around the drive sprocket. Fit the bar onto the mounting studs and engage the tensioner pin in the bar's tensioner hole.

Replace the side cover and snug the nuts finger-tight. Lift the bar tip slightly and turn the tensioning screw until the chain fits snugly against the bottom of the bar. With a gloved hand, pull the chain around the bar; it should move freely but not sag away from the bar. Tighten the bar nuts securely, then check tension again after the saw has run and warmed up. A warm chain often needs a small adjustment.

Sharpening, Lubrication, and Replacement Signs

Sharpening keeps a Husqvarna 20 inch bar and chain cutting efficiently. Use the correct file size for your chain pitch, and maintain the recommended top-plate angle and depth gauge setting. A blunt chain produces fine dust instead of chips, cuts slowly, and forces you to push the saw, which increases wear and kickback risk. Sharpen often, even if you only touch up the cutters every tank of fuel.

Watch for signs that the bar or chain needs replacement. A bar with worn rails, a damaged sprocket nose, or blue overheating marks should be replaced. A chain with broken or stiff links, missing cutters, or stretched beyond adjustment should also be retired. Keeping a spare chain on hand lets you swap quickly in the field and sharpen the dull one later. A well-maintained bar and chain make your Husqvarna safer, faster, and more enjoyable to use.

Whether you are replacing a worn-out loop before firewood season or setting up a second bar for bigger jobs, taking the time to verify pitch, gauge, drive links, and bar mount pays off. A correctly matched Husqvarna 20 inch bar and chain turns a good saw into a reliable cutting tool that starts easier, cuts straighter, and lasts longer. Check your model's specs, keep a spare chain on hand, and your saw will be ready for the next tree that comes down.

AD