Mastering the Technique: Wrapping a 6x6 Post like a Pro
Wrapping a 6x6 post can significantly enhance your home's curb appeal. This simple DIY project not only improves the appearance of your home, but also provides protection for your wooden posts from the elements. Here's a step-by-step guide to help you achieve a professional-looking result.
Before you start, ensure you have the right tools and materials. You'll need a tape measure, a pencil, a miter or miter box saw, a drill, exterior wood glue, a staple gun, and your chosen wrapping material. For a rustic look, you might use wooden battens; for a modern feel, vinyl or composite materials could be more suitable.
Preparation and Measuring
Begin by measuring and cutting your posts to the desired length. A typical post height for decks or porches is around 8 feet. Remember to account for the post to be set in concrete if you're installing a new one.



Next, calculate the width and height of each post. A 6x6 post is actually 5.5 inches square, as the lumber industry charges for nominal size rather than actual size. Mark these dimensions on your wrapping material to ensure a perfect fit.
Cutting the Battens
Using your measured dimensions, cut your battens to the correct length. For a 6x6 post, these will typically be around 72 inches long. You'll need four battens for each post - two for the width and two for the height.



Each batten should be cut to fit snugly around the post. You can create a template using thin card or paper to help with this process, ensuring a precise fit every time.
Attaching the First Battens
Start by applying exterior wood glue along one edge of your first batten. Position it on one side of the post, ensuring it's flush with the top and bottom of the post. Use clamps to secure it in place while the glue dries.
After the glue has set, drill pilot holes through the batten and into the post. This will help prevent the wood from splitting. Use screws or nails to secure the batten in place. Repeat this process for the second batten on the other side of the post.






Wrapping the Post
Now that you've secured the battens for the width of the post, it's time to wrap the height. Follow the same process as before - apply glue, secure with clamps, drill pilot holes, and screw or nail in place.
For an extraуюn touch, you can miter the corners of the battens before attaching them. This creates a seamless, professional look at each corner of the post.
Finishing Touches
Once you've secured all the battens, fill any gaps with exterior wood filler. Allow this to dry, then sand it smooth. To protect your wrapping material from the elements, apply an exterior varnish or paint, following the manufacturer's instructions.
You can also stain the post and battens to match your home's aesthetic. This should be done before applying varnish or paint for the best results.
Congratulations! You've successfully wrapped your 6x6 post. This simple update can make a significant impact on the look of your home. Consider ordering a custom post cap to complete the look and provide additional protection for your posts.





