How to Wrap a 6x6 Post with Wood
Wrapping a 6x6 post with wood not only enhances its aesthetic appeal but also provides added protection against weathering and rot. This guide will walk you through the process, from gathering materials to completing the final wrap.
Before you begin, ensure you have the right tools and materials. A miter saw or handsaw, tape measure, pencil, circular saw, safety glasses, work gloves, and exterior-grade wood are essential. The wood should be Pressure Treated Pine (PT) or another weather-resistant species.
Preparation
Start by preparing your post and workspace. Ensure the post is level and secure in the ground. Remove any loose bark or imperfections that could hinder the wrapping process.



Measure your post's height to determine the length of the wood planks you'll need. For a 6x6 post, each plank should be about 6 inches wide and the length equal to or slightly less than the post's height.
Choosing the Right Wood
Pressure Treated Pine (PT) is often the best choice due to its resistance to rot, decay, and insects. Cedar and Redwood are other excellent options but may be more expensive.



Ensure the wood is exterior-grade and rated for continuous ground contact if the post will be partially buried. If unsure, always check with the supplier or manufacturer.
Tool Selection
A miter saw or handsaw can cut the wood to size. For long cuts, a circular saw might be more convenient. Ensure all your tools are in good working condition before starting.
Safety gear, including safety glasses and work gloves, is crucial when handling sharp tools and wood. Also, consider using ear protection and a dust mask.






Wrapping the Post
Begin at the top of the post, with the first plank. Ensure it's level and securely held in place. Use Outdoor Wood Glue and stainless steel nails or screws to attach it.
Each subsequent plank should be staggered at least 6 inches from the plank below it for added strength and stability. This helps prevent water from pooling and promotes better air circulation.
Securing the Planks
Use exterior-grade, stainless steel screws or nails to secure the planks. Screws provide better holding power and can be less likely to loosen over time. Galvanized or painted steel fasteners are acceptable alternatives, but stainless steel is preferable.
Predrill pilot holes to prevent the wood from splitting. Space fasteners evenly, ensuring they're at least 2 inches from the edges and 3 inches from the ends of each plank.
Finishing Touches
Once all planks are securely attached, you can fill any visible pilot holes with exterior wood filler and sand lightly. This will provide a smooth surface for finishing.
Apply a protective coating, such as exterior wood sealant, paint, or stain, to help prolong the life of the wood wrap. Always follow the manufacturer's instructions for specific application procedures and safety precautions.
Regularly inspect your wrapped post for any signs of wear or damage. Touch up or replace any problem areas promptly to maintain the post's structural integrity and your hard work.
Now that you've added a stylish and protective touch to your post, sit back and enjoy the result. If you have other posts to wrap, consider tackling them one at a time to maintain the quality and look of each. Happy wrapping!





