how to trim a 6 panel interior door

Mastering Your Space: Trim a 6-Panel Interior Door like a Pro

By Emily Jackson
AD

Ready to update the appearance of your home? One of the easiest and most impactful changes you can make is refinishing your doors. Here's a step-by-step guide on how to trim a 6-panel interior door and give it a whole new look.

Before you start, gather your materials: a miter saw, measuring tape, a pencil, sandpaper, a sanding block, wood glue, finish nails and a hammer, or a nail gun, and your choice of paint or stain. Remember to wear safety gear, including gloves, goggles, and a dust mask.

Preparation

The first step is preparing your door for trimming. Remove any hardware, such as knobs and hinges, and lay your door flat on saw horses or supported on a table.

AD
Door Trim Makeover — Before & After DIY Transformation
Door Trim Makeover — Before & After DIY Transformation
DIY Plain Door Makeover
DIY Plain Door Makeover
an open door with the words easy ways to update interior door trim on it's side
an open door with the words easy ways to update interior door trim on it's side

Sand the door lightly, focusing on any rough areas or knicks. This will ensure your new trim adheres well and provides a smooth surface for painting or staining. Wipe away dust with a damp cloth before proceeding.

Measure and Cut the Rails

The rails are the horizontal pieces of the door frame. Measure and cut four pieces to fit along the top and bottom of the door, leaving enough space between them to accommodate the stiles (vertical pieces) and panels. These should fit flush with the edge of the door and overlap the stiles slightly.

Updating Interior Doors with Molding
Updating Interior Doors with Molding
the easy way to upgrade a flat door is with this simple diy project and it's free printable
the easy way to upgrade a flat door is with this simple diy project and it's free printable
Interior Door Trim - A Quick and Easy DIY
Interior Door Trim - A Quick and Easy DIY

Using a miter saw, cut 45-degree angles at the ends of your rail pieces. Test fit them against the door, ensuring they fit snugly. Make any necessary adjustments before moving on.

Measure and Cut the Stiles

Next, measure and cut the stiles. You'll need two pieces for each side of the door. These will run vertically, framing the panels and connecting to the rails. Cut 45-degree angles at the top and bottom of each stile, making sure they match the angles on your rail pieces.

AD

Test fit your stiles against the door, ensuring they align with the rails and leave space for the panels. Make any necessary adjustments before proceeding.

What to Consider When Replacing Interior Doors? | New Interior Doors
What to Consider When Replacing Interior Doors? | New Interior Doors
Master Makeover: DIY Plain to Paneled Door - Jenna Sue Design
Master Makeover: DIY Plain to Paneled Door - Jenna Sue Design
How to Paint a Panel Door Perfectly in Under an Hour
How to Paint a Panel Door Perfectly in Under an Hour
an open door with the words how to upgrade door trim for a high end finish
an open door with the words how to upgrade door trim for a high end finish
How to Add Molding Panels to a Flat Door
How to Add Molding Panels to a Flat Door
Transform Your Space with Stylish 6 Panel Doors
Transform Your Space with Stylish 6 Panel Doors

Assembling the Trim

With all your pieces cut, it's time to start assembling the trim. Apply wood glue along the edges of each piece that will connect to another. This will ensure a strong bond and prevent the trim from separating over time.

Attaching the Rails

Start by attaching the top rail. Align it carefully with the top of the door and use finish nails to secure it in place. Ensure it's flush with the edge of the door. Repeat with the bottom rail.

AD

Check that both rails are level and aligned with each other. Make any necessary adjustments before moving on.

How to Majorly Update Flat Panel Doors on a Budget - Sprucing Up Mamahood
How to Majorly Update Flat Panel Doors on a Budget - Sprucing Up Mamahood

Attaching the Stiles

Now, attach the stiles. Start with one side and align it with the edge of the door and the rails. Use finish nails to secure it in place, ensuring it's flush with the door. Repeat with the other stile.

Check that your stiles are square with the rails and aligned with each other. Make any necessary adjustments. Your door trim should now be fully assembled and ready for finishing.

AD

Finishing the Door

The final step is to finish your door. Use a paintbrush or foam roller to apply your chosen paint or stain to the trim. Allow it to dry according to the manufacturer's instructions, then apply a second coat for durability and richness of color.

Reattaching Hardware

Once your door is completely dry, reattach any hardware you removed at the start. If you're using new hardware, ensure it's properly aligned and secure.

Stand back and admire your handiwork. Your 6-panel interior door now boasts a fresh, stylish look that's sure to impress everyone who sees it.

Don't forget, regular maintenance and updates will keep your door looking its best. Happy DIYing!

AD