How to Tile Above a Bathtub
Embarking on a tile installation project above your bathtub can dramatically enhance your bathroom's aesthetic appeal and durability. This comprehensive guide walks you through the process, offering expert tips and techniques for a professional outcome.
Before you start, consider the type of tile - porcelain or ceramic - and the wall surface. Porcelain is more durable and ideal for high-traffic areas, while ceramic is ok for infrequently used walls. Ensure your wall is smooth, dry, and free of mold to prevent tiles from falling off.
Preparation and Planning
Thorough planning and preparation are key to a successful tile installation.



Materials and Tools
Gather all necessary tools and materials to minimize trips to the store during installation.
Tools: Trowel, notched trowel, grout float, rubber gloves, plastic tile spacers, level, tape measure, tile cutter (or wet saw for larger tiles)
Purchase Proper Tiles and Adhesive
Buy enough tiles to allow for waste and cutting. Get pre-mixed thin-set mortar or mortar mix to adhere tiles to the wall.
Tiling the Bathtub Wall
Once you've prepared, it's time to install the tiles. Ensure you're working in a well-lit area and wear safety glasses.
Apply the Surface Preparation
Spread the thin-set mortar using a notched trowel, holding it at a 45-degree angle. This ensures the mortar is properly applied and improves adhesion.
Start at the Bottom and Work Up
Begin tiling at the bottom, using a straight edge or a level to ensure your first row is horizontal and level. Apply mortar to the back of each tile and press them firmly against the wall, offsetting joints by using tile spacers.
Adding Decorative Tiles or Mritto (Optional)
If you're incorporating decorative tiles or a mitre to accent your bathtub, now's the time to integrate them into your design.
Measure and Mark Cut Lines
Using a tile cutter or wet saw, carefully score and snap decorative tiles to the required size. Wear safety glasses and gloves during this process.
Apply and Install Decorative Tiles
Apply mortar to the back of decorative tiles and press them into place following your layout. Ensure they align neatly with the mitre if using one.
Once all tiles are installed, allow the mortar to cure according to the package instructions, usually 24 to 48 hours. Then, mix grout and apply it to the joints using a grout float. Let it set for around 15 minutes, then wipe off excess grout.
Allow the grout to cure before you use your bathtub again. Now, enjoy your beautiful, newly tiled bathtub wall!













