How to Easily Install Neon Lights on Wall
Illuminating your space with neon lights is a surefire way to add a vibrant and modern touch. But once you've chosen the perfect design, how do you ensure it sticks to your wall? This comprehensive guide will walk you through the process, from gathering materials to the final installation, ensuring your neon light remains securely attached and brightens your space for years to come.
Before we dive into the DIY process, it's crucial to understand that neon lights come in two types: traditional glass neon and LED neon. Both can be safely installed on walls, but LED lights are more energy-efficient and easier to install. This guide will focus on LED neon lights, which are more widely used today due to their eco-friendliness and affordability.
Preparation and Choosing the Right Materials
Selecting the right materials is key to a successful installation. Besides your neon light, you'll need:



- Rubber cement or a strong adhesive suitable for LED lights
- Electric drill and appropriate drill bit
- Mounting hardware (usually included with the light)
- Screws (if your wall allows)
- Wall anchors (if needed)
Understanding Your Wall Material
Different wall materials require different installation methods. Concrete and brick walls can support a wide range of fixings, but drywall or plasterboard needs more care to avoid damage.
For drywall or plasterboard, you'll need to use wall anchors to spread the weight and prevent the screw from pulling through the wall. Always choose anchors suitable for your wall's specific material and the weight of your neon light.



Gathering Tools
Having the right tools makes the job easier and safer.
- Safety glasses
- Pencil and measuring tape
- Level
- Stepladder or stool (for high walls)
Now that you have everything you need, let's move on to installing your neon light.
Installing the Neon Light
Safety is paramount when working with electricity. Always ensure the power is off at the mains and use an LED tester to confirm your light is de-energized before starting.






Marking and Drilling Holes
First, decide on the placement of your light. Use a pencil and measuring tape to mark out where the mounting brackets will go. Ensure the light is level and centered on the wall.
Using the appropriate drill bit, carefully drill pilot holes at your marked points. If you're drilling into plasterboard, use a rawlplug or wall anchor and the correct drill bit to create a suitable-sized hole.
Attaching Mounting Hardware
Attach the mounting hardware to the walls using the screws or wall anchors. Be sure the brackets are securely attached and perfectly level.

Before attaching the neon light, test the hardware by securing the light's end caps into the brackets. Ensure the light hangs evenly and is secure. If everything looks good, it's time to attach the light to the hardware.
Securing the Neon Light
Carefully lift the light and secure it into the brackets. Use the supplied screws or screws suitable for your wall material to attach the light to the brackets. Ensure the light is secure and does not wobble.
Now that your light is hung, you can turn the power back on at the mains and test your neon light. It should glow brightly, ready to illuminate your space.
Pro tip: Regularly check the screws to ensure they remain tight, and over time, you may need to touch up any cables with additional electrical tape to maintain their appearance and prevent damage from dust or debris.
Cleaning Up and Final Touches
After your light is securely installed, you can wipe away any excess dust or residue from the wall and your light. Take a moment to admire your handy work – your space is now bathed in vibrant, modern lighting that'll be the envy of your friends and neighbors!
Remember, the key to a successful neon light installation is preparation, patience, and attention to detail. With the right materials and careful planning, you can create a stunning, energy-efficient light feature that'll last for years. Happy installing!




