how to retile a shower tub

Step-by-Step Guide: How to Retile a Shower Tub in 2023

By Matthew Hernandez
AD

Freshening up your bathroom with a new tile job can make a world of difference. One key area that often takes a beating over time is your shower-tub combo. Learning how to retile a shower tub is a cost-effective way to revitalize your bathroom space without breaking the bank. This comprehensive guide will walk you through the process, from preparation to completion.

Before diving into the process, let's clarify the difference between retiling and replacing your bathtub. Retiling involves re-covering your existing tub with new tiles and grout, while replacing requires removing the old tub and installing a new one. If your tub is beyond repair or needs a significant reshaping, consider a replacement. Otherwise, read on to discover how to retile a shower tub and elevate your bathroom's aesthetics.

Preparation: Get Your Shower-Tub Ensemble Ready

Before you start tiling, follow these steps to prep your shower-tub area:

AD
Tips on How to Remove Old Shower Tile
Tips on How to Remove Old Shower Tile
Tile over Tile Tutorial for a Bathtub Surround
Tile over Tile Tutorial for a Bathtub Surround
a man laying in a bathtub with the words how to waterproof a tub surround using kerdi board
a man laying in a bathtub with the words how to waterproof a tub surround using kerdi board

1. Inspect the tub: Check for any cracks, leaks, or damages. If found, address these issues before tiling. Also, ensure the tub is structurally sound and secure.

2. Clean the tub: Remove any soap scum, grime, or old caulk using a degreaser or specialized cleaner. Let it dry completely before tiling.

Millie’s Remodel: How to Tile a Shower/Tub Surround and Never Replace Caulk Again
Millie’s Remodel: How to Tile a Shower/Tub Surround and Never Replace Caulk Again
How to Remodel a Shower
How to Remodel a Shower
How I Saved $1500 in my Bathroom Renovation (and you can too)
How I Saved $1500 in my Bathroom Renovation (and you can too)

Gather Your Tools and Materials

Assemble all the necessary tools and materials before starting. This list includes:

  • New ceramic or porcelain tiles (ensure they're suitable for wet areas)
  • Thinset mortar or other appropriate adhesive
  • Grout and sealer
  • Tile cutter or wet saw (if needed)
  • Trowel
  • Notched trowel
  • Sponge
  • Caulk
  • Grout float
  • Rubber grout⑵ amplifier
  • Safety gear (gloves, goggles, ear protection)

Measure and Plan Your Tile Layout

Measure your tub's length and width, then determine your tile pattern. Popular options include straight (subway) or diagonal offsets. Consider using part tiles along the edges if necessary.

AD

Lay out your tiles on the tub to decide on the best starting point. Typically, start from the middle of the tub's longest side to minimize cutting on the remaining edges.

Tile Your Bathroom Shower
Tile Your Bathroom Shower
Easy Steps to Remove a Plastic Tub Surround | DIY Bathroom Renovation Tutorial! #DIYTutorial
Easy Steps to Remove a Plastic Tub Surround | DIY Bathroom Renovation Tutorial! #DIYTutorial
How to Retile a Shower: Beginner-Friendly Step-by-Step Guide for Stunning Results
How to Retile a Shower: Beginner-Friendly Step-by-Step Guide for Stunning Results
How to Remodel a Shower
How to Remodel a Shower
How I Re-Grouted My Shower For Under $50 - The Coupon Project
How I Re-Grouted My Shower For Under $50 - The Coupon Project

Tile Installation: Covering Your Shower-Tub Surface

Now that you're prepared, follow these steps to tile your shower tub:

1. Apply the adhesive: Using a notched trowel, spread the thinset mortar or chosen adhesive across the tub's surface, applying a sufficient amount to create a strong bond. Hold the trowel at a 45-degree angle to create grooves that help improve adhesion.

AD

Install the Tiles

Start from your pre-determined starting point and lay the tiles one by one, pressing them firmly into the adhesive. Use spacers to maintain even grout lines between tiles. If necessary, use a tile cutter or wet saw to trim tiles at the edges.

Work your way across the tub, ensuring each tile is level with the next and following your planned layout. Allow the adhesive to set as per the manufacturer's instructions before proceeding to the next step.

Apply Grout and Seal

Once the adhesive has cured, mix your grout according to package instructions. Use a grout float to spread the mix evenly between the tiles, forcing it into the grooves. Work diagonally to ensure complete coverage.

AD

Let the grout set for around 15 minutes, then use a damp sponge to remove excess grout from the tile surface. Allow the grout to cure as directed by the manufacturer.

Final Touches: Caulking and Inspection

After the grout has fully cured, apply caulk along the edges of the tiles where they meet the wall or tub surface. This creates a waterproof seal, preventing moisture from penetrating and causing damage.

Inspect your newly tiled shower-tub ensemble to ensure all tiles are secure and the grout lines are even. Address any issues promptly to maintain the quality and longevity of your work.

Congratulations on successfully retiling your shower tub! Enjoy your refreshed bathroom space and bask in the satisfaction of a job well done. Regularly clean and maintain your new tiles to preserve their appearance and protect your bathroom from water-related issues. If you encounter any future problems, don't hesitate to seek professional advice to keep your shower-tub combo in tip-top shape.

AD