How to Restring an RV Shade in 7 Simple Steps
Restringing an RV shade might seem like a daunting task, but with the right tools and a little patience, it's a job you can tackle yourself. Regular maintenance like this ensures your travels remain comfortable and your RV interior stays protected from the sun's harsh rays. Let's get started!
Before we dive into the steps, gather your tools and materials. You'll need a new set of RV shade cord, scissors, a sharp retractable knife, and a strong pair of scissors. Having another person to help can make the process easier and quicker.
Preparing the RV Shade for Restringing
Before you begin, ensure your RV is parked on a level surface. If the shade is currently extended, carefully retract it. Take out the old cord - it's usually held in place by cleats or tension hooks along the valence or header.



Inspect the old cord for any signs of wear or damage. If it's frayed or broken, it's definitely time for a replacement. Even if it looks fine, replacing it ensures a smooth operation and prevents any potential accidents during your trips.
Removing the Old Cord
Starting at one end, carefully cut the old cord from its cleats or hooks and as you move towards the other end. This will make removal easier and minimize cord slippage while restringing. If your RV has a rooftop shade, you might need to climb onto the roof for better access. Safety first - use a sturdy ladder and stay aware of your surroundings.



Once you've cut the cord, pull it out through the valence very carefully to avoid damaging the material. Set the old cord aside for now. You might need it to match your restringing technique if your new cord is somehow different.
Measuring and Cutting the New Cord
Now that the old cord is out, measure the length needed for the new one. It should be the same length as the old cord, plus any additional length needed for tying knots at each end. Most RV shade cords are about 40-50 feet long, but it's always a good idea to double-check.
Cut the new cord with scissors or a sharp knife to the correct length, plus a few extra inches to account for any inaccuracies in measurement. Having a little extra cord won't hurt; you can always trim it after restringing.



![[SOLVED] RV Roller Shade Won’t Stay Down](https://i.pinimg.com/736x/11/af/ad/11afad33e72524aaa6685bae3bc72280.jpg)


Restringing the RV Shade
Now comes the actual restringing part. Start by threading the new cord through the valence or header where the old cord was. Go slowly and steadily, using the old cord as a guide if needed.
Once the cord is threaded through, begin tying it to the cleats or tension hooks at each end. Tie a secure knot, such as a bowline or a figure-eight knot. Make sure the cord is taut but not so tight that it causes the shade to wrinkle or stay permanently extended.
Securing the Cord to the Cleats or Hooks
Adjust the cord so it's evenly tensioned across the entire length of the shade. The shade should move smoothly without sagging or binding. If you're having trouble, don't be afraid to ask for help. An extra pair of hands can make this stage easier.

Once you're satisfied with the tension, tie off the cord at both ends. Trim any excess cord with scissors, leaving about an inch or so of cord beyond the knot for future adjustments or repairs.
Testing the Restrung RV Shade
Test the newly restringed shade by extending and retracting it several times. It should move smoothly and evenly along its track. If there's any resistance or snagging, something might be out of alignment, and you'll need to reassess and readjust your cord.
If everything works perfectly, well done! You've just learned how to restring an RV shade. Regularly inspect your shade for signs of wear or damage, and don't wait until it breaks completely before restringing it again.
Happy travels! Don't forget to enjoy the journey as much as the destination. Stay safe out there!





