Step-by-Step Guide: Replace Side Marker Light on Jeep Wrangler
If you're a Jeep Wrangler owner and have noticed a burnt out side marker light, don't let that deter you from replacing it yourself. This simple task can be completed in under an hour with just a few tools. In this step-by-step guide, we'll walk you through how to replace a side marker light on a Jeep Wrangler, ensuring you're back on the road in no time.
Before starting, gather your tools: a #20 torx socket wrench, pliers, and a replacement side marker light (ensure it's compatibility with your Jeep Wrangler's make and model). Safety first, so park in a well-lit area with the engine turned off and the parking brake engaged.
Accessing the Side Marker Light
The first step is to gain access to the side marker light. It's housed within the front fender, beneath the headlight assembly.



Using the #20 torx socket wrench, remove the two screws securing the bumper cover. Pull the bumper cover away from the fender to expose the side marker light assembly.
Removing the Old Light
With the bumper cover out of the way, you'll see the side marker light assembly. Use the pliers to gently pry off the clips holding the assembly in place. Pull the assembly away from the fender to access the wires.



Disconnect the wiring harness by squeezing the tab on the connector and pulling it apart. Now, you can remove the old light, being careful not to lose any stray screws or components.
Preparing the New Light
Before installing the new light, ensure it's compatible with your Jeep's electrical system. If unsure, you can consult your vehicle's owner's manual or check with a local Jeep dealership.
Visit a Jeep parts store or order online for the correct replacement side marker light. Once you have it, verify that the light's shape, size, and electrical connectors match the old one.




Installing the New Side Marker Light
Now that you have the old light out and your new one ready, it's time for the reverse process to install the new one.
First, connect the wiring harness to the new light. Ensure the connector is securely fastened by pushing the tab back into place.
Securing the New Light
Position the new light in place, ensuring the lens faces the correct direction. The light should fit snugly into the fender without any gaps.
Press the clips back into place to secure the light assembly to the fender. Reconnect the bumper cover by aligning it with the fender and pushing it into place. Finally, secure it with the two screws you removed earlier using the #20 torx socket wrench.
Test your new side marker light by turning on your Jeep's headlights. If the light illuminates, congratulations! You've successfully replaced the side marker light on your Jeep Wrangler. Regularly inspect your lights to ensure they're functioning correctly, and always replace them as soon as they burn out to ensure your safety and compliance with traffic laws. Happy trails!"



