How to Replace Mirror on 2012 Chevy Silverado
Ever found yourself gazing into your rearview mirror, only to be greeted by a cracked or broken surface? If you're a proud owner of a 2012 Chevy Silverado, you're in the right place. Replacing a mirror on your Silverado might seem like a daunting task, but with the right guidance, it's a job you can tackle independently. Let's dive into a step-by-step guide on how to replace a mirror on your 2012 Chevy Silverado.
Before you start, gather your tools and materials. You'll need a screwdriver (usually a Phillips #2), a pry tool or a flathead screwdriver, a mirror replacement unit, and possibly some electrical tape for extra security. Always ensure you're working in a well-lit and safe area.
Removing the Old Mirror
The first step in replacing your mirror is removing the old one. Here's how:



1. Pop off the rearview mirror - Start by lowering the rearview mirror. Then, use your pry tool or a flathead screwdriver to gently pry off the mirror's cap. This should reveal the mounting screws.
2. Remove the screws - Using your screwdriver, remove the screws securing the mirror to the mount.



Disconnecting the Electrical Connections
Before detaching the mirror, you need to disconnect the electrical wires.
1. Locate the connector - Look for the electrical connector, usually behind the mirror or beneath the cover plate.
2. Disconnect the connector - Gently pull out the connector from its housing. If it's stiff, wiggle it a bit to loosen it.





Removing the Mirror Mount
Now, you can remove the mirror mount. Here's how:
1. Detach the mirror mount - With the screws removed and the electrical connector disconnected, gently pull the mirror mount away from the vehicle's ceiling.
2. Remove any remaining screws or bolts - Sometimes, there are screws or bolts connecting the mount to the roof. Remove these if present.
Installing the New Mirror
With the old mirror removed, it's time to install the new one. Here's the step-by-step process:
1. Prepare the new mirror - Ensure the new mirror comes with the correct screws and bolts. If not, use the ones from the old mirror.
Securing the Mirror Mount
Start by securing the new mirror's mount:
1. Align the mount - Position the new mirror mount back onto the roof, ensuring it's in the correct location.
2. Secure the mount - Using the screws or bolts, secure the mount to the roof.
Installing the Mirror
Now, it's time to attach the mirror:
1. Connect the electrical connector - Match the wires to the corresponding slots in the connector, then push it in until it clicks.
2. Attach the mirror to the mount - Insert the mirror into the mount, ensuring the screws line up.
3. Secure the mirror - Using the provided screws, secure the mirror to the mount. Make sure the mirror is level and aligned.
4. Reattach the cap - Once the mirror is secure, reattach the cap and gently push it back into place.
As you raise and lower the mirror, ensure it's functioning correctly. If not, double-check your connections. To wrap things up, double-check that all your tools and the old mirror are properly disposed of or recycled.
Replacing a mirror on your 2012 Chevy Silverado is a straightforward process with the right know-how. If you're ever unsure, don't hesitate to consult a professional. Regular mirror replacements ensure your safety and overall driving experience. Happy motoring!


