Revamp Your Bathroom: Step-by-Step Guide to Replace an Old Medicine Cabinet Mirror
Is your old medicine cabinet mirror foggy, cracked, or just outdated? Replacing it might seem like a daunting task, but don't worry, it's actually quite straightforward and can be done in a day. Let's delve into the step-by-step process of how to replace an old medicine cabinet mirror.
Before we dive into the steps, ensure you have the necessary tools: a screwdriver, a utility knife, safety glasses, a pry bar, a pencil, and a helper for support. Also, remember to turn off the electrical power to the area to prevent any accidents. Once you're set, let's begin.
Preparing for Removal
Safety should always come first. Cover the mirror with masking tape to prevent shattering and ensure safe disposal later.



Next, you need to remove the frame. If it's stuck with caulk, you might need to score it lightly with a utility knife to break the seal. Then, use a pry bar to carefully pry off the frame. If it's attached with screws, use a screwdriver to remove them.
Unscrewing the Mirror
Now, it's time to remove the mirror. Most likely, it's held in place by screws along its sides or back. Use a screwdriver to remove these screws. If it's stuck, you might need to use the pry bar gently.



Once the screws are removed, support the mirror with one hand and carefully slide it out of the cabinet. If it's too big or fragile, consider breaking it into smaller pieces first. Always wear safety glasses for this part.
Preparing for the New Mirror
Now that the old mirror is out, it's time to prep the area for its replacement. Clean the cabinet surface where the new mirror will go. Remove any remaining screws or caulk.
Next, measure the space to ensure the new mirror will fit exactly. The new mirror should be the same size or slightly smaller than the old one. If it's not, you might need to trim it down using a glass cutting tool, following the manufacturer's instructions.






Securing the New Mirror
Before attaching the new mirror, wrap the back of it with painter's tape to prevent scratches. Then, apply a thin bead of clear polyester adhesive along the edge where it will sit in the cabinet.
Next, position the mirror into place, ensuring it's level and centered. Once you're sure it's aligned, press it firmly into place. Remove the tape from the back of the mirror. If the adhesive is not permanent, you might need to secure the mirror with screws from the back or sides.
Finally, step back and admire your handiwork. Your bathroom now has a new, sparkling mirror that's ready to reflect your beautiful self. If you changed the position of the mirror, don't forget to turn the power back on to your lights. It's always a good idea to test the light switch to ensure everything is working correctly.






