How to Replace a Side Mirror on a 2015 Chevy Malibu
Ever found yourself staring at a shattered side mirror on your 2015 Chevy Malibu, only to groan at the thought of replacing it? Fret not, you're not alone. Accidents happen, and when they do, you can't afford to let a broken side mirror compromise your safety or your car's aesthetic. Here's a comprehensive guide on how to replace a side mirror on your 2015 Chevy Malibu, ensuring your safety and saving you a trip to the mechanic.
Before we dive into the step-by-step process, let's ensure you have all the necessary tools and parts. You'll need a replacement side mirror specific to your 2015 Chevy Malibu, a ratchet and socket set, a screwdriver, a pry bar, and some tools for removing and installing the new mirror. Make sure to purchase a new mirror with the correct part number to ensure a perfect fit: 39780470 for the driver's side and 39780471 for the passenger side.
Preparation and Tools
Before starting, make sure your vehicle is securely supported and has ample space for work. You don't want it rolling while you're underneath. Also, ensure the power to the mirror is turned off by disconnecting the battery or unplugging the rearview mirror power cord.



Now that your workspace is ready, gather your tools. You'll need:
- A replacement side mirror
- Ratchet and socket set
- Screwdriver (likely a Phillips HEAD)
- Pry bar
- Tools for removing and installing the new mirror (included with the new mirror)
Removing the Old Side Mirror
Start by removing the interior mirror cover if it's installed, as you might need access to the adjustment wheel inside. Then, use your screwdriver to remove the mirror assembly. There should be a single Phillips-head screw holding it in place. Once the screw is out, pry the mirror housing from the door with your pry bar, working it around the edges until the old mirror is loose.



Before pulling the mirror off, disconnect the electrical connector from the back of the mirror. This should have about 1/8" of play, so you may need to gently pry it apart with your hands. Once the wires are disconnected, gently pull the old mirror away from the door. Be careful not to bend or damage the mirror hardware, as you'll need it to install the new one.
Installing the New Side Mirror
Now that the old mirror is out, take your new side mirror and locate the adjustment wheel at the back of it. Thread the mirror mounting hardware through the hole in the door, tightening the nut against the door's inner panel. Before tightening the nut all the way, ensure the mirror is correctly positioned. With the help of a friend, adjust the mirror to your liking and secure it in place.
Once the mirror is secured, connect the electrical connector to the back of the new mirror. Ensure the connector is fully seated and secured with its locking clip. Finally, reattach the interior mirror cover (if applicable) and test the new mirror's operation. Remember to reconnect your car's battery or re-engage the rearview mirror power.






Adjusting and Testing the New Mirror
With the new side mirror in place, it's time to adjust it to match your existing mirror's positioning. Start by adjusting the tilt and angle using the adjustment screws on the back of the mirror. Once you're satisfied with the position, tightly secure the mirror to the door using the provided tools.
Before driving off, test the new mirror's functionality. Ensure it folds in and out as intended. If it's a power-folding model, make sure it folds in automatically when locked and out when unlocked. Give it a few days of testing to ensure no unexpected issues arise.
And there you have it! You've successfully replaced your side mirror, ensuring your safety and saving yourself a trip to the mechanic. If you found this guide helpful, please consider sharing or saving it for future reference. Safe driving!


