Step-by-Step: Replace a Range Hood Light [Updated Guide]
If your range hood, that vital kitchen appliance that keeps the air fresh and the smoke out, starts to dim or flicker, it might be time for a replacement. Replacing a range hood light is a straightforward task that anyone with a little DIY know-how can accomplish. Let's dive into the step-by-step process, ensuring you're equipped with the right tools and knowledge for a hassle-free replacement.
Before you get started, it's crucial to understand the type of light fixture you're dealing with. Most range hoods use eitherkern mount or canopy mount lights. The process differs slightly between these two types, so make sure to check your range hood's manual or identify the mounting style. Let's go through the process for each type.
Replacing Kern Mount Range Hood Lights
Kern mount lights are typically found on under-cabinet range hoods. They have a small, circular mounting plate that secures the light fixture to the hood. Here's how to replace them:



Gather Your Tools and Materials
Before you start, ensure you have the following: a new light fixture with the same wattage and bulb type, a screwdriver (Philips or flathead, depending on your range hood), and a pair of wire strippers.
Disconnect Power and Remove the Old Light
First, turn off the power to your range hood at the circuit breaker. Remove the mounting screws on the range hood and gently pull out the old light fixture. Disconnect the wires by stripping about 1/2 inch of insulation from each wire, then twisting the exposed copper together and wrapping the connection with electrical tape.



Replacing Canopy Mount Range Hood Lights
Canopy mount lights are usually found on wall mount or island range hoods. They have a larger, rectangular mounting bracket that secures the light fixture to the hood. Here's how to replace them:
Prepare for the Replacement
As with the previous process, turn off power at the circuit breaker and gather your tools and materials. Additionally, you might need a utility knife to carefully cut away any caulk around the existing light fixture.
Remove the Old Light Fixture
Using your screwdriver, remove the mounting screws and carefully pull out the old light fixture. If the fixture is stuck due to caulk or paint, use a utility knife to score the caulk or carefully cut through the paint. Once the fixture is loose, disconnect the wires as described in the previous section.






Installing the New Light Fixture
Now that the old light fixture is removed, it's time to install the new one. The process is essentially the reverse of the removal process. Here's how:
Connect the Wires
Strip about 1/2 inch of insulation from each wire on the new light fixture and the range hood. Twist the exposed copper together and wrap the connection with electrical tape. Ensure the black wire (hot) connects to the black wire, and the white wire (neutral) connects to the white wire. If there's a green or bare wire (ground), connect it to the green grounding wire or the nearest metal screw on the mounting bracket.
Secure the New Fixture
Once the wires are connected, position the new light fixture in place and secure it with the mounting screws. If you're replacing a canopy mount light, you might need to apply a bead of caulk along the fixture's edges before securing it in place to ensure a watertight seal.

Turn the power back on at the circuit breaker and test your new light fixture. If it illuminates, you've successfully replaced your range hood light! If not, double-check your connections and ensure all wires are properly seated. Regular maintenance, like periodically replacing the light bulb and keeping the hood clean, will ensure your new light fixture serves you well for years to come. Happy cooking!



