how to remove rv puck lights

Effortlessly Remove RV Puck Lights

By Christopher Hernandez
AD

Tired of the dated look of those puck lights in your RV? Ready to upgrade to something more modern and energy-efficient? Removing those old lights might seem like a daunting task, but with the right guidance, you can do it like a pro. Let's dive into how to remove RV puck lights and upgrade your space in no time.

Before we start, remember safety first. Always ensure your RV is parked on level ground and turned off from all power sources. Also, it's a good idea to wear safety glasses to protect your eyes from any debris.

Gather Your Tools and Materials

First things first, make sure you have all the necessary tools and materials on hand. You'll need:

AD
How to Remove RV Interior Puck Light Covers
How to Remove RV Interior Puck Light Covers
How to Remove RV Interior Puck Light Covers
How to Remove RV Interior Puck Light Covers
a man is fixing the ceiling light in his rv's living room with text reading rv light hack you need to see literally takes seconds
a man is fixing the ceiling light in his rv's living room with text reading rv light hack you need to see literally takes seconds
  • Screwdriver (usually a Phillips head)
  • Wire cutters
  • Tape measure
  • New lights and packaging
  • Electrical tape
  • plyers (optional, for stubborn screws)

Once you've gathered everything, you're ready to begin.

Preparing the Area for Removal

Before you start taking anything apart, measure the space where the new lights will go. This will help you ensure you buy the right size replacement lights. Also, mark the locations of the new lights on the ceiling using a pencil.

How to Replace RV Lights With Led
How to Replace RV Lights With Led
How to Replace LED Puck Lights
How to Replace LED Puck Lights
someone is cleaning up the kitchen sink with a rag on it's arm and another hand reaching for something in front of them
someone is cleaning up the kitchen sink with a rag on it's arm and another hand reaching for something in front of them

Turning Off the Power

Ensure that the 12V electrical circuit connected to the puck lights is turned off. Simple, right?

But to be absolutely sure, test the lights. If they're dead, great! If not, switch off the circuit breaker connected to the 12V wires. Some RVs have individual breakers for lights, while others may require you to turn off the entire 12V circuit.

AD

Removing the Old Lights

Now that the power is off, you can start removing the old lights. Start by uninstalling the retaining screws. They're typically at the back of the light.

How to Replace RV Lights With Led
How to Replace RV Lights With Led
Change Your RV Lights
Change Your RV Lights
Changing An LED Ceiling Puck Light In The RV – How To Replace And Install – RV Upgrades
Changing An LED Ceiling Puck Light In The RV – How To Replace And Install – RV Upgrades
How to Replace RV Light Fixtures in 7 Easy Steps
How to Replace RV Light Fixtures in 7 Easy Steps
DIY RV Light Fixtures in 7 Easy Steps
DIY RV Light Fixtures in 7 Easy Steps
How to Replace LED Puck Lights
How to Replace LED Puck Lights

Some puck lights might have screws at the top or sides. Use your screwdriver to gently loosen the screws and pull out the light. If the light is stubborn, use pliers to get a better grip and gently pull it out.

Installing the New Lights

Now that the old lights are out, it's time to install your new ones. First, match the new lights to your markings on the ceiling.

AD

Mounting the New Lights

Once you've found the perfect spot, secure the new lights using the screws that came with them. Make sure they're tight, but not so tight that you strip the threads.

RV LED Lights Replacement Tutorial
RV LED Lights Replacement Tutorial

If the new lights are a different size than the old ones, you might have to drill new holes. If you do, use a drill bit that's slightly smaller than the screw you'll be using. Then, secure the light as mentioned earlier.

Connecting the Wiring

Before you connect the wires, make sure the polarity of your new lights matches the old ones. Usually, the red wire is positive, and the black or white wire is negative. However, always double-check before connecting.

AD

Strip about three-eighths of an inch of insulation from the wires using your wire cutters. Then, twist the exposed wire at the end to maintain a good connection. Connect the wires, ensuring the positive matches the positive, and the negative matches the negative. Finally, secure the connection with an electrical connector or some electrical tape.

Testing Your New Lights

Once you've connected the wires, it's time to see if your lights work. Slowly turn the power back on at the circuit breaker and flip the light switch. If your lights turn on, congratulations! You've successfully removed those old RV puck lights and installed some new ones.

If they don't work, don't panic. Double-check your connections and make sure you followed each step correctly. If you're still having trouble, it might be a good idea to consult a professional.

Now that your RV has been updated with some modern, energy-efficient lights, it's time to start planning your next adventure. Happy travels!

AD