Revitalize Your Outdoor Space: Step-by-Step Guide to Reroof a Garden Shed
If your garden shed's roof is looking worse for wear, it might be time to re-felt it. This will not only refresh its appearance but also protect it from rain and snow. Re-felting a garden shed roof is a DIY project that can save you money and give you a sense of accomplishment. Let's guide you through this process step by step.
Before you start, you'll need to gather some tools and materials. You'll need a hammer, a utility knife, roofing felt, roofing nails, a ladder, and safety gear such as work gloves and a safety hat. You might also want to have a friend to assist you, especially if you're not quite comfortable with heights.
Assessing the Damage
Before you start, it's crucial to assess the damage on your shed roof. Check for any missing, torn, or curling felt. Also, look out for any signs of water damage on the roof's underlying structure. If the damage is extensive, you might need to consider a complete roof replacement rather than a re-felt job.



If the damage is limited to the felt, you can proceed with re-felting. Just ensure that the underlying roof structure is sound and secure. Any repairs to the roof's structure should be carried out before you proceed with re-felting.
Preparing the Roof
Start by clearing the roof of any debris. This could include leaves, branches, or even nests. Use a broom or a leaf blower to clear the roof. If there are any rusty nails, remove them with a hammer and a claw to prevent any injuries.



Once the roof is clear, lay down a tarp or a drop cloth at the base of the ladder to collect any nails or debris that may fall during the process. This will save you time when cleaning up later.
Removing the Old Felt
Using a hammer and a flathead screwdriver, carefully lift one corner of the felt. Once you've lifted a corner, you can use a utility knife to start cutting the felt. Cut the felt into manageable strips that you can roll up and discard. Be careful not to cut yourself on any nails as you work.
Once all the old felt is removed, inspect the roof sheathing underneath. If there are any signs of rot or water damage, you'll need to repair these before you proceed. Allow the roof to dry completely before you install the new felt.






Installing the New Felt
Your new felt will likely come in rolls. Unroll one strip, ensuring the felt runs lengthwise along the slope of your roof. Start at the bottom of the roof, allowing the felt to overlap the drip edge by a few inches. This will prevent water from seeping underneath the felt.
Using roofing nails, secure the felt to the roof. Space your nails about 6 inches apart along the top edge of the felt. Work your way up the roof, using a hammer to drive the nails in straight and secure.
Applying the Next Layer
Once you've finished the first layer, start applying the second layer, working your way up the roof. The second layer should overlap the first by about 5 inches. This overlap will help to channel water off the roof effectively.

Use the same nailing pattern as before, spacing your nails about 6 inches apart along the top edge of the felt. Ensure that each nail is driven straight in and that the felt lies flat against the roof.
Finishing Up
With the second layer complete, trim any excess felt from the roof's edge. You can use a utility knife to carefully cut the felt, following the line of the roof.
Finally, inspect your work. Ensure that there are no nails sticking out and that the felt lies flat against the roof with no wrinkles or bubbles. If everything looks good, you're done!
Refelling your garden shed roof is a rewarding DIY project that can help preserve your shed's longevity. Just remember to take your time, stay safe, and enjoy the process. Happy re-felting!




