How to Install Trim Around Your Bathtub Surround
Transforming your bathroom into a stylish and functional haven often starts with attending to the details – like putting trim around your tub surround. Trim doesn't just enhance the aesthetics; it also provides a finished look that hides rough edges and protects the surround from water damage. This guide will walk you through the process, ensuring you achieve professional results.
Before we dive into the steps, let's first discuss the trim materials you might consider. The most common options are plastic, wood, and metal. Each has its pros and cons, so choose based on your budget, style, and maintenance preferences. Now, let's get started!
Preparation: Gather Tools and Materials
Ensure you have all the necessary tools and materials at hand before you begin. This will make the process smoother and more efficient. Here's a list to get you started:



- Trim material of your choice
- Mitre saw or manual mitre box
- Jigsaw
- Circular saw
- Mitre clamps
- Tape measure
- Cordless drill
- Screws or nails
- Sandpaper
- Primer and paint (if using wood trim)
Measure and Cut Trim Pieces
Accuracy is key here. Measure each side of your tub surround carefully, and make marks on the trim material. Use a mitre saw to cut 45-degree angles at the ends of the trim, ensuring the angles match the corners of the tub surround.
For wall-to-wall pieces, measure the distance between the tub surround and the wall, and cut the trim accordingly. Remember to make the cuts at 45-degree angles to create a seamless fit. Take your time; precision is vital for a clean, professional look.



Dry Fit the Trim
Before you secure the trim in place, perform a dry run to ensure all pieces fit properly. This step allows you to make any necessary adjustments before you start drilling or nailing. Place the trim pieces in position and use mitre clamps to hold them together at the corners.
Inspect the dry fit for any gaps or flaws. If you notice any issues, adjust your cuts as needed. Once you're satisfied with the fit, it's time to secure the trim in place.
Install the Trim
The installation process varies slightly depending on the material you're using. Let's go through each one.






Plastic Trim
Plastic trim is easy to install and requires minimal preparation. Start by applying a bead of silicone caulk along the tub surround where the trim will sit. This provides a waterproof seal and helps hold the trim in place. Then, secure the trim using small finishing nails or adhesive designed for plastic trim. Use a nail setting tool to recess the nails slightly below the surface, allowing you to fill them with wood filler or caulk for a seamless finish.
If your trim doesn't have pre-made holes, you may need to drill pilot holes using a countersink bit. Don't forget to wear safety glasses when using power tools!
Wood Trim
Wood trim offers a warmer, more luxurious feel. It's also more prone to moisture damage, so proper preparation is crucial. Start by painting the trim with a primer designed for bathroom use. Follow up with a high-quality, moisture-resistant paint to seal and protect the wood.
Once painted, measure and mark your holes, then drill pilot holes. Secure the trim using screws or finish nails, countersinking them slightly below the surface. Again, use a setting tool to ensure a smooth finish. After installation, apply caulk along the seams to seal any gaps and prevent water ingress.
Metal Trim
Metal trim is durable and can be used to create a contemporary or industrial-chic look. Start by cleaning the surface to ensure good adhesion for any adhesive you use. If you're using screws or nails, follow the same process as with wood trim: drill pilot holes, secure the trim, and countersink the fasteners. If you're using adhesive, apply it according to the manufacturer's instructions, then secure the trim in place and hold it there with clamps until it's fully set.
After the trim is installed, fill any countersunk holes with wood filler, let it dry, then sand smooth and paint to match the trim.
Finishing Touches
The trim isn't the only detail that can elevate your tub surround. Consider adding a decorative border or
Consider adding a decorative border or beadboard for a more custom, upscale look. You can also paint or wallpaper the area between the trim and the ceiling to create a focal point. Don't forget to clean up any mess and dispose of debris responsibly.
That's it! With these steps, you've successfully put trim around your tub surround. Your bathroom is now not only functional but also stylish and inviting. Enjoy your upgraded space! If you're inspired to take on more DIY projects, consider tackling the walls or installing new flooring next. Happy renovating!




