Installing Hose in Suncast Hose Hideaway: A Step-by-Step Guide
Tired of unsightly hoses cluttering your space? The Suncast Resin Hose Hideaway is a lifesaver, cleverly concealing your hose and reels while keeping them easily accessible. Here's a step-by-step guide on how to put a hose in your Suncast Hose Hideaway, ensuring a secure and organized setup.
The Suncast Hose Hideaway is designed for easy installation and use. It accommodates most standard 5/7 or 10/20 hoses and reels, up to 200 feet in length. Let's dive into the process with our comprehensive guide.
Preparation and Measurement
Before you start, make sure you have all the necessary components. Your Suncast Hose Hideaway should come with a flexible cover, base, and mounting hardware. Additionally, you'll need a compatible hose reel and a 100-120 PSI garden hose.



Measure the diameter of your hose and ensure it's compatible with the hose hideaway. Most Suncast models accommodate hoses with diameters up to 1.5 inches. Also, measure the length of your hose to ensure it fits within the hideaway's capacity.
Assembling the Hose Reel
The Suncast Hose Hideaway is designed to work best with their wall-mount or standalone hose reel. Assemble the reel according to the manufacturer's instructions, ensuring all parts fit securely together.



Once assembled, attach the hose to the reel, threading it through the guide tube, and securing it with the hose հազel. Make sure the hose is evenly distributed on the reel, allowing for smooth retraction and extension.
Installing the Hose Hideaway Base
Start by locating a suitable spot for the Hose Hideaway, ensuring it's close to your water source and has enough space to accommodate the reel and hose. Mark the position and use a drill to create pilot holes for the mounting screws.
Position the base over the marked holes, then secure it using the provided screws. Ensure the base is level and secure to provide a stable foundation for your hose and reel.






Installing the Hose and Reel
Now that your Hose Hideaway base is installed, it's time to secure the hose and reel.
Before installing, ensure your hose is fully extended and free of kinks, making it easier to thread through the hideaway.
Threading the Hose through the Hideaway
Lift the flexible cover of the Hose Hideaway and locate the hose entry portal. Insert the hose through this portal, pulling it through until the faucet connector emerges at the bottom of the hideaway.
Extend the hose to your faucet, ensuring it's long enough to reach without creating unnecessary bends or tension. Leave some slack to account for the retraction of the hose onto the reel.
Securing the Reel to the Base
Position the mounted hose reel onto the base of the Hose Hideaway. Ensure the reel is properly aligned and centered within the hideaway.
Secure the reel to the base using the provided screws. Tighten securely, ensuring the reel is firmly attached to the base and free of wobble.
Testing and Maintenance
With your hose and reel securely installed, it's time to test the setup.
Turn on the faucet and extend the hose, ensuring it unwinds smoothly from the reel. After use, retract the hose back onto the reel and test the automatic brake system to ensure it locks the reel securely in place.
Regular Maintenance
Regularly inspect your hose and reel for any signs of wear, damage, or leaks. Clean the hose and reel periodically to prevent dirt and debris from accumulating and potentially damaging the mechanism.
Inspect thehideaway's flexible cover, ensuring it's secure and free of cracks or tears. Check the mounting screws periodically, tightening as needed to maintain a secure installation.
With your Suncast Hose Hideaway set up, you'll enjoy a clutter-free space and convenient hose management. Happy gardening!





