How to Assemble IKEA Kallax with Feet
Do you own an IKEA KALLAX storage unit and find yourself wishing you could use the top as an additional surface? Good news! With a little creativity and some simple modifications, you can turn the top of your KALLAX into a practical workspace, a display shelf, or even a Scandinavian-inspired bar. Let's explore how to put feet on your IKEA KALLAX to extend its functionality.
Before we dive in, it's essential to understand that adding feet to your KALLAX will raise it off the ground, making it a freestanding piece rather than a simple storage solution against a wall. This alteration will not only provide you with more usable space but also transform the look of your unit. Here's a step-by-step guide to help you achieve this.
Gathering Materials and Tools
The first step in adding feet to your IKEA KALLAX is to gather all the necessary materials and tools. Here's a list to help you get started:



- Legs: You can use IKEA's own CAPITA or ADDA legs, or opt for a more personalized touch with legs from another furniture piece or a DIY project.
- Screws: Ensure the screws are compatible with your chosen legs and the thickness of your KALLAX top.
- Drill: A handheld drill will make the process faster and easier.
- Pencil: To mark where you'll drill holes.
- Tape measure: To ensure accurate measurements and spacing.
- Ruler or square: For precise marking and measuring.
Once you have all your materials ready, let's move on to the next step.
Preparing Your KALLAX
Before you start drilling, it's crucial to prepare your KALLAX unit properly. This involves measurements and marking where you'll attach the legs. Follow these steps:



Measure and Mark
Using your tape measure, ruler, and pencil, mark where you want the legs to go. It's essential to make sure that the legs are evenly spaced and that the unit remains stable once the legs are attached. A common placement is one leg at each corner and one in the middle of each side.
Start by marking the center of each side. Then, measure and mark points approximately 4 inches (or your desired distance) in from each corner. These marks will serve as guides for drilling your holes.
Pre-drill Holes
Now that you've marked where the legs will go, it's time to pre-drill holes for the screws. This step prevents the wood from splitting and makes the actual attachment of the legs easier. Using your drill bit, carefully drill a pilot hole at each marked point.






Remember to drill slowly and steadily, and to use a suitable drill bit size that matches your screws. Once you've pre-drilled all the holes, you're ready to attach the legs.
Attaching the Legs
With all the preparation done, it's finally time to attach the legs to your IKEA KALLAX.
Position the Legs
With the help of a friend or spouse, position the legs according to your marks. Make sure the legs are straight and even, and that the KALLAX remains stable. You may want to adjust the height of the legs at this point to ensure your unit is level.

Once you're satisfied with the positioning, slightly loosen the screws on the legs to make attachment easier.
Secure the Legs
Now that the legs are in place, it's time to secure them to your KALLAX. Starting with the topmost screw on each leg, tighten each screw gently but firmly, using a drill or screwdriver. Be careful not to overtighten, as this can split the wood or cause the legs to become uneven.
Once all the top screws are secure, check that the legs are still level and straight. If everything looks good, tighten the bottom screws on each leg, again being careful not to overtighten.
Congratulations! You've just transformed your IKEA KALLAX into a freestanding piece of furniture with added functionality. Now that your KALLAX has feet, you can use the top as a workspace, a display shelf, or even a cozy reading nook with the addition of a large, comfortable cushion.
Remember, the possibilities are endless with a little creativity and some simple modifications. So go forth and transform your IKEA KALLAX into a piece that truly reflects your personal style and meets your storage and functional needs. Happy crafting!





