How to Measure for a Corner Shower Stall Perfectly Every Time
Installing a corner shower stall can optimize your bathroom space, offering both style and functionality. However, a perfect fit requires precise measurements. Here's a step-by-step guide to help you measure for your corner shower stall correctly.
Start by understanding your bathroom layout. Corner stalls are ideal for nooks, and they can help maximize space in squares or rectangular bathrooms. Before measuring, ensure the area is clear of obstructions and you have all the necessary tools—measuring tape, pencil, and paper.
Assessing Your Bathroom Space
Before any measurements, sketch your bathroom layout. Include permanent fixtures like doors, windows, and plumbing. This step helps visualize where the stall can be placed and if it will fit in the desired corner.



The ideal location for a corner shower stall is the furthest corner from the bathroom door and any obstacles. It should also be near the shower drain and water supply lines for easy plumbing connections.
Measuring the Corner
Once you've decided on the location, start measuring from the corner. Corners are typically 90 degrees, but it's essential to double-check, as variations can occur during construction. Use a carpenter's square or a combination square to ensure a precise 90-degree angle.



Measure both sides of the corner from the outside edge where the shower stall will butt up against the walls. These measurements should be the same for a perfect fit. Make sure to account for any trim or baseboards that will remain.
Determining Stall Size
Corner shower stalls come in various sizes, typically ranging from 36" x 36" to 48" x 48". Some are also available with a 60" side for larger bathrooms. Choose a size that fits your space and meets your needs. Most corners can accommodate a 36" x 36" or 42" x 42" stall, but measure carefully to ensure a snug fit.
Some stalls are designed to fit specifically into 60"x 60" or 67"x 67" corners. If your corner measures slightly less, you might need to adjust your stall layout or go for a smaller option. Never try to force a larger stall into a smaller corner—it can lead to leaks and poor functionality.






Measuring for Accessibility
Accessibility is crucial when choosing and positioning your corner shower stall. Consider the Civil Rights Division of the Department of Justice's Americans with Disabilities Act (ADA) regulations for shower stall dimensions. The minimum dimensions for accessibility are 36" x 36", with a door swing of at least 60".
To ensure accessibility, measure the clear width and আদերում of the shower door swing. This should be at least 60" for a 36" x 36" stall, and wider if you choose a larger stall. Also, consider any adjacent bathroom features, such as cabinets or sinks, that might hinder accessibility.
Plumbing and Wall Framing
Before purchasing your stall, consider the wall framing and plumbing. Many stalls come with pre-set plumbing locations, so confirming your shower connection points is crucial. Measure and note down the location of your shower drain and water supply lines, then match them with the stall's plumbing positions.

For walls, measure the stud spacing. Most walls have 16" or 24" on center stud spacing. This can influence where you place your shower stall, as some corners may not accommodate standard stud spacing. Additionally, consider any wall-centered obstacles, like switches or outlets, which could interfere with stall installation.
Accurate measurement is key to a successful corner shower stall installation. Double-check all measurements and ensure the stall will fit your specific space, account for accessibility, and complement your existing plumbing. With careful planning and precision, you'll be enjoying your new corner shower stall in no time.



