how to make ute tray sides from scratch

How to Build Ute Tray Sides from Scratch: DIY Guide

By Hannah Robinson
AD

Embarking on a DIY project to craft your own ute tray sides from scratch is an exciting venture that combines practicality and personalization. Ute tray sides not only enhance the appearance of your utility vehicle but also increase its functionality and safety. Let's dive into this comprehensive guide that'll walk you through every step of creating your custom ute tray sides.

Before we delve into the building process, consider the materials you'll need. You'll primarily work with steel for the structure, but don't forget other essentials like angle irons, screws, and a high-quality paint to protect your creation. Safety gear, including gloves and a welding helmet, are also crucial. Now, let's get started!

Designing and Planning

Before you grab your welding torch, it's crucial to envision and plan your ute tray sides. Sketch your design, consider enhancements like toolboxes or compartments, and ensure it aligns with your ute's load capacity and safety regulations.

AD
Building an ENTIRE 4WD Tray FROM SCRATCH!
Building an ENTIRE 4WD Tray FROM SCRATCH!
🟡 Steel Ute Tray Plans - NEW DESIGN 🟡
🟡 Steel Ute Tray Plans - NEW DESIGN 🟡
the diagram shows how to install and use an easy way to build a camper
the diagram shows how to install and use an easy way to build a camper

Measure your ute bed's dimensions precisely. This will help you create ute tray sides that fit like a glove. Don't forget to account for flexibility; you want your tray sides to move slightly with the vehicle's movement without compromising their structural integrity.

Gathering Materials and Tools

A smooth project relies on having the right tools and materials. Your list should include:

Home built DIY 1st gen Tacoma flatbed Ute tray!
Home built DIY 1st gen Tacoma flatbed Ute tray!
Building my custom 4WD ute tray - In under 10 Minuets!
Building my custom 4WD ute tray - In under 10 Minuets!
Ute Trays - Heavy Duty Aluminium Ute Trays | Norweld
Ute Trays - Heavy Duty Aluminium Ute Trays | Norweld
  • Steel sheets or strips (thickness and size will depend on your design)
  • Angle irons
  • Welding equipment (MIG or TIG welder, safety gear)
  • Power tools (drill, saw, grinder)
  • Hardware (screws, bolts, nuts)
  • Paint and primer
  • Paintbrushes and spray equipment
  • Measuring tape, pencils, and a level

Cutting and Preparing Steel Pieces

Using your measurements and design, cut the steel pieces for your tray sides. Wear safety gear, especially protective eyewear, during this process. Ensure each piece is well-cut, clean, and free of burrs that could impede the welding process.

If your design includes curves, use a plasma cutter or have them professionally cut. For straight cuts, a metal cutting saw works well.

AD

Welding Ute Tray Sides

The welding process binds your ute tray sides together. Safety is paramount; always wear appropriate gear, work in a well-ventilated area, and follow safety guidelines for your specific welding equipment.

Steel Ute Tray Plans
Steel Ute Tray Plans
Before and After Ute Tray Upgrade Second Hand Steel Transformation
Before and After Ute Tray Upgrade Second Hand Steel Transformation
a truck is parked in a garage next to another truck and some pallets on the floor
a truck is parked in a garage next to another truck and some pallets on the floor
D.I.Y Custom Tray build part #5 + Q & A
D.I.Y Custom Tray build part #5 + Q & A
My DIY custom steel tray build on a old 4WD!
My DIY custom steel tray build on a old 4WD!
Building an ENTIRE 4WD Tray FROM SCRATCH!
Building an ENTIRE 4WD Tray FROM SCRATCH!

Begin by welding the base of your tray sides, using lengths of steel to create a sturdy foundation. Then, move on to welding the sides, ensuring they're perpendicular to the base. Monitor the alignment closely during this stage, as any imprecision here will affect the final product.

Welding Techniques for Ute Tray Sides

For welding ute tray sides, consider these techniques:

AD
  1. MIG (Metal Inert Gas) welding: MIG welding uses an inert gas (like argon) to shield the welding area from atmospheric contamination. It provides a fast, durable weld ideal for thicker materials.
  2. TIG (Tungsten Inert Gas) welding: TIG welding is more suited to thinner materials and offers excellent control over the weld's temperature and appearance. It's slower than MIG but provides a neater result.

Finishing Touches

With the welding complete, grind down any excess welds and smooth rough edges. Apply a primer to protect the steel from rust, followed by your chosen paint color.

a metal workbench in a garage with tools on it
a metal workbench in a garage with tools on it

Consider adding toolboxes or other enhancements during this stage. Ensure any additions are securely welded or bolted to your ute tray sides for safety.

Installation and Maintenance

Your newly crafted ute tray sides are ready for installation. Position them within your ute bed, ensuring they fit correctly. Clamp them temporarily for extra security.

AD

Maintenance is key to prolonging your ute tray sides' lifespan. Inspect them regularly for signs of damage or wear. Touch up any chips in the paint, and keep them clean to prevent excessive rusting.

Congratulations! You've just built and installed custom ute tray sides. This addition not only boosts your ute's functionality but also reflects your creativity and commitment to quality craftsmanship. Happy adventuring!

AD