"DIY Mirror Trim: Step-by-Step Guide"
Adding trim to a mirror not only enhances its aesthetics but also provides functional benefits, such as protecting walls from scratches and eliminating sharp edges. This guide will walk you through the process of making mirror trim at home, using simple tools and readily available materials.
Before you start, gather your materials. You'll need a router or jigsaw, sandpaper, measuring tape, a pencil, mirror clips or brackets, a miter saw or miter box and backsaw, wood glue, clamps, and your chosen trim material - often a moldable strip or hardwood like pine.
Preparing the Mirror and Trim
The first step involves measuring your mirror accurately. Ensure you account for the thickness of the trim to avoid gaps or overhangs. Mark your measurements on the trim material.



Using a jigsaw or router with a straight edge guide, cut the trim to your measured lengths. Make sure to maintain 45-degree angles for mitered corners, ensuring a seamless fit around your mirror.
Attaching the Trim to the Mirror
The trim needs to be securely attached to the mirror. Here, you have two common methods: using mirror clips or wood brackets, or integrating the trim as part of the mirror frame.



Using Mirror Clips or Brackets
If you've chosen to use clips or brackets, position them against the trim, mark their locations on the mirror, and drill pilot holes. Attach the clips or brackets using screws, ensuring they're tight but not too tight, to avoid cracking the mirror.
Apply a small amount of wood glue to the back of the trim where it will meet the mirror. Carefully attach the trim, using clamps to secure it in place until the glue dries.
Integrating the Trim into the Mirror Frame
This method requires more precision. After cutting your trim, you'll need to create rabbet joints on the inside edge of the trim, allowing it to sit flush with the mirror. Use a router with a rabbet bit to achieve this.





Once the rabbet joints are cut, attach the trim to the mirror as described in the previous method. Ensure the trim fits snugly into the rabbet, and use clamps and wood glue to hold it in place while drying.
Finishing and Installation
After the glue has dried, use sandpaper to smooth any rough edges on the trim. If desired, you can now paint or stain the trim to match your decor.
Finally, hang your newly trimmed mirror using appropriate hardware. Whether you choose brackets, hangers, or a standalone frame, ensure the method you choose can support the weight of your mirror safely.
Your newly trimmed mirror not only looks fantastic but also adds a touch of elegance and protection to any space. Enjoy your DIY project and the satisfaction that comes with adding a personal touch to your home decor!





