Creating Authentic Western Vibe: How to Craft Swinging Saloon Doors
Saloon doors, swinging double doors or even batwing doors, have been iconic in depicting the Wild West era. If you're looking to create that old-west charm in your space, building swinging saloon doors is a fun and rewarding DIY project. This guide will walk you through the process, optimizing your efforts with helpful tips and tricks.
Before you grab your tool belt, it's crucial to remember that safety always comes first. Ensure you have the right equipment, including safety glasses, gloves, and appropriate gear for using power tools. Now, let's dive into our first main topic: gathering materials and tools.
Materials and Tools
Your first step is to gather all the necessary materials and tools. You'll need:



- Two sheets of plywood (3/4 inch thick, 4' x 8' each)
- Eight pieces of 2x4 lumber (8 feet each)
- Construction adhesive
- One and a half inches of hinges (swing-out hinges with strikes)
- One and a half inches of screws
- Sandpaper
- Stain or paint (optional, for finishing)
- Tape measure
- Circular saw
- Drill
- Jigsaw (optional, for decorative accent)
Materials Explanation
For the bulk of the door, you'll be using two sheets of 3/4 inch plywood. The 2x4s will form the frame of each door. Construction adhesive aids in reinforcing the frame and stiffening the door. Hinges, along with screws, will allow your doors to swing open and closed.
While staining or painting is optional, it adds a protective layer and helps achieve your desired finish. Decorative cuts, like an arch at the top of each door, can be made with a jigsaw for a more authentic saloon look.



Measuring and Cutting
The size of your doors will depend on the opening you're installing them on. Typically, saloon doors are around 36 inches wide and 80 inches tall. You'll need to cut the plywood and 2x4s to these measurements, minus 1/2 inch on each side for the frame.
First, cut two pieces of 2x4 to 79 inches each for the vertical frame pieces. Then, cut two more pieces to 35 inches each for the horizontal frame pieces. These will create the frame for one door. Repeat this process for the second door.
Assembling the Door Frame
With your pieces cut, it's time to assemble the door frame. Start by applying construction adhesive to one of the vertical 2x4s. Then, attach the horizontal 2x4s on top and bottom, forming a rectangle. Ensure the frame is square by measuring diagonally and adjusting as necessary.






Once your frame is square, use screws to reinforce the construction adhesive. Repeat this process for the second door. Now, let's move on to attaching the plywood.
Attaching the Plywood
Apply construction adhesive to the back of one of your plywood sheets. Place it into the frame, ensuring it's flush with the outer edges. Secure the plywood with screws, spacing them every 6 inches or so. Repeat this process for the second door.
Once both doors are assembled, it's time to prepare them for hinges.

Installing the Hinges
Mark the spots where you'll attach your hinges. Usually, they're placed about 16 inches from the top and bottom of the door and spaced evenly across the width. Drill pilot holes for your screws, then attach the hinges.
To make your doors swing outwards, you'll need to install the hinges on the side where you want the door to swing. With your hinges attached, it's time to attach the doors to their frame.
Step back and admire your new saloon doors! If you'd like, you can stain or paint them to match your space. Don't forget to follow up with routine maintenance, like sanding and refinishing, to keep your doors looking their best.
Now that you've mastered the art of making swinging saloon doors, why not try building other DIY projects to enhance your space? The possibilities are endless!





