how to make raised cabinet doors

How to Make Raised Cabinet Doors: A Step-by-Step Guide

By Robert Jackson
AD

Enhance your cabinet's aesthetic appeal and functionality with custom-made raised panel doors. This step-by-step guide will help you create stunning, high-quality doors that showcase your craftsmanship and make a statement in your space.

Before you start, gather your tools and materials: a pattern router or jigsaw for cutting the door, a router for shaping the panel, a router table or shaper for raising the panel, sandpaper for smoothing edges, clamps for securing the door, and safety gear including goggles and work gloves.

The Design Process: Planning and Cutting

Begin by drawing your design or using a pre-made pattern. Consider the size of your cabinets and the proportion of the door to the cabinet face.

AD
a woman holding up a cabinet door with the words 7 ways to build a cabinet door
a woman holding up a cabinet door with the words 7 ways to build a cabinet door
How To Make Raised Panel Doors
How To Make Raised Panel Doors
Raised Panel Cabinet Doors
Raised Panel Cabinet Doors

Cut the door according to your design. If you're using a pattern router or jigsaw, ensure you're routing or cutting on the waste side of the line for a smooth finish.

Creating the Raised Panel

A raised panel door consists of three parts: the outer frame and the raised center panel. To create the panel, use a router or a shaper with a raised panel bit. Set the depth of the router or shaper according to the desired height of your panel.

a woman sitting in front of a cabinet with the words how to build diy cabinet doors
a woman sitting in front of a cabinet with the words how to build diy cabinet doors
How to Make Shaker Cabinet Doors (No Fancy Tools Needed)
How to Make Shaker Cabinet Doors (No Fancy Tools Needed)
a man is working on some wood
a man is working on some wood

Route or shape the center panel first, then router the rebate around the perimeter to accommodate the panel. Sand any rough edges carefully.

Attaching the Raised Panel

Place the raised panel into the rebate, ensuring it fits snugly. Use wood glue to secure the panel in place. Apply glue evenly along the rebate, place the panel, and use clamps to hold it until the glue sets.

AD

Once the glue is dry, sand any excess glue and smooth out the join. You may want to apply a finish to your door at this stage, such as paint or stain, to protect the wood and highlight the raised panel's details.

How to Make A Raised Panel Door – Florida School of Woodwork
How to Make A Raised Panel Door – Florida School of Woodwork
Family Room Built-in - The Base Cabinets
Family Room Built-in - The Base Cabinets
a wooden door being assembled on a table
a wooden door being assembled on a table
How to Build Corner Cabinets with Raised Panel Doors
How to Build Corner Cabinets with Raised Panel Doors
the words how to layout raised panel cabinet doors
the words how to layout raised panel cabinet doors
3 DIY Cabinet Door Construction Techniques (Easy to Advanced) - Angela Marie Made
3 DIY Cabinet Door Construction Techniques (Easy to Advanced) - Angela Marie Made

Installing Your Raised Cabinet Doors

Before installation, measure your cabinet opening to ensure your door fits perfectly. If necessary, trim the door using a hand saw or jigsaw.

Hinges are typically attached to the door first, spaced evenly along the top and bottom. Use a hinge-jamb template to mark the hinge position on the door and cabinet. Secure the hinges using screws, ensuring they're tight against the wood.

AD

Checking Alignment and Hinge Action

Test the hinge action by opening and closing the door. Make adjustments as necessary, ensuring the door swings smoothly and aligns with the cabinet face.

DIY Easy Raised Panel Shaker Cabinet Doors
DIY Easy Raised Panel Shaker Cabinet Doors

Once satisfied with the function, install any cabinet pull or knobs. Your raised cabinet doors are now complete, transforming your cabinets into a focal point in any room.

Embrace your newfound door-making skills! Start planning your next project, perhaps transforming another room with custom doors or even attempting more complex designs. Happy crafting, and remember, practice makes perfect.

AD
AD