Mastering Hoop Making: A Step-by-Step Guide for Row Covers
Hooking up your plants with reliable protection can be a gardener's dream. This is where hoops and row covers come in, offering a barrier against harsh weather, bugs, and other unwanted elements. But how can you make these hoops yourself? Well, we'd be happy to guide you through the process. Here's a step-by-step guide to crafting your own hoops for row covers.
The great thing about making your own hoops is the satisfaction of a DIY project. Plus, it's surprisingly easy and cost-effective. Let's dive right into it.
Gathering Your Materials
Before you start, make sure you have the right tools and materials. You'll need:



- Galvanized or stainless steel wire (16- or 17-gauge is good)
- Wire cutters
- Pliers
- Measuring tape
- Rod bender (optional but helpful)
Galvanized or stainless steel wire is best as it won't rust and will last longer.
Choosing the Right Wire
Wire thickness is crucial. The thicker the wire, the stronger your hoops will be. But they'll also be heavier and more difficult to shape. So, it's a balance.



16-gauge wire is a good all-around choice. It's strong enough for most row covers but not so thick that you'll struggle to shape it.
Why Galvanized or Stainless Steel?
These types of wire won't rust, which is a problem with ordinary steel wire. Rust can weaken the wire and eventually break it, so it's worth the extra investment.
Measuring and Cutting Your Wire
Now that you have your materials, it's time to measure and cut your wire. The hoops' length and number will depend on your garden's size and layout.






Typically, each hoop should be a few inches longer than the width of your row. For example, if your rows are 36 inches wide, you might cut your wire to 42 inches. This will give you about 3 inches of wire on either end to secure the hoop to the ground.
How Much Wire Do You Need?
To find out how much wire you need, calculate the total length of your rows. Then, divide that number by the width of your rows. Finally, add about 6 inches to each length for the ends.
For example, if you have 100 inches of rows, and your rows are 36 inches wide, you would need (100 ÷ 36) + 6 inches of wire.

Cutting the Wire
Use wire cutters or a large-metered tool to cut your wire to the appropriate lengths.
Important: Always wear safety glasses when using wire cutters to protect your eyes from flying debris.
Shaping Your Hoops
Now for the fun part - giving your wire its new, hoop-like shape.
Using a Rod Bender
If you have a rod bender, you're in luck. It can make the job much easier and quicker. Simply place your wire in the bender, close it, and pull the wire through. The bender will give your wire the right curve.
You might need to make several passes to get the perfect shape. Don't worry if it's not perfect; you can adjust it by hand later.
Shaping by Hand
If you don't have a rod bender, don't worry. You can still shape your wire by hand. It'll just take a bit more fudging and finesse.
Starting at one end of your wire, bend it into a U-shape. Keep bending until you have a hoop shape. You might need to use pliers to hold the wire and make tight bends.
Tip: Straighten the ends of your wire as much as possible. This will make it easier to drive them into the ground.
Securing Your Hoops
Once your hoops are shaped, it's time to secure them to your row.
If you've planted your row cover directly on the ground, you can simply drive the ends of the wire into the ground at either end of your row. This will secure the hoop in place.
Tip: If you're having trouble driving the wire into the ground, try using a hammer or a rock to gently tap it in.
Securing to Stakes
If your row cover is staked down, you'll need to attach your hoops to the stakes. The easiest way to do this is to simply spiral the wire around the stake, starting at the top and working your way down.
Alternatively, you could use a wire tie or a bolt to secure the hoop to the stake. Whichever method you choose, make sure the hoop is stable and won't wobble in the wind.
Covering Your Hoops
Once your hoops are secure, it's time to cover them with your row cover material. Simply lay the fabric over the hoops and secure it to the ground on either side.
Leaving the fabric uncovered can allow pests and debris to slip underneath, so make sure to tuck it in tightly.
And there you have it! Your very own homemade hoops for row covers. It's a rewarding process, and you'll find that your plants appreciate the extra protection.
So, go ahead, get creative, and make those hoops for your garden. Happy gardening!




