How to Make Garden Edging With Concrete
Transform your garden's aesthetics and organization with a durable, elegant concrete garden edging. Not only does it enhance your landscape's visual appeal, but it also prevents soil from spilling over, contains plants, and keeps your pathways clean. Here's a comprehensive guide on how to make garden edging with concrete, ensuring a professional finish that lasts for years.
Before you start, envision your garden's layout and decide on the design of your concrete edging. Curve-edged, angular, or stepping stone styles are popular choices, each adding a unique touch to your garden.
Preparation and materials
Gather the necessary materials and prepare your work area for a successful project.



**Materials needed:**
- Concrete mix (ready-mix or quick-set is recommended)
- Concrete edging forms (you can use concrete edging form molds, or create your own using wood or plastic)
- Shovel
- Wheelbarrow or mixing tub
- Concrete trowel
- Tape measure
- Spirit level
- Garden hose (for watering the soil)
- Stakes and string (for marking out your edging path)



Site preparation
Begin by laying out your edging path. Use stakes and string to denote the perimeter, ensuring a straight line with the help of a tape measure and a spirit level. Water the soil within the path profoundly to help the concrete bond securely.
Additionally, consider the depth of your edging. A standard depth is 2-3 inches below ground level, helping to stabilize the edging and keep it from tipping over. Mark the desired depth using stakes, ensuring a consistent level throughout.
Setting up the forms
Place your concrete edging forms along the designated path, aligning them with precision. Secure them in place using stakes if necessary, especially for curved or intricate designs. Ensure there's adequate space between the forms and the existing soil for concrete.






Create a small pilot section of edging at one end, pour your concrete mix here first. This allows you to fine-tune your process before committing to the entire project. Once satisfied with your pilot section, proceed to the rest of the path.
Mixing and pouring concrete
Mix your concrete in small batches to avoid it setting before you can use it. For ready-mix or quick-set concrete, follow the manufacturer's instructions. For traditional concrete mix, combine one part cement, two parts sand, and three parts aggregate, adding just enough water to create a thick, smooth consistency.
Transport the mixed concrete to your forms using a shovel, filling each form section gradually. Use a trowel or a piece of wood to level the concrete within the forms, ensuring it's even and compacted.
Filling and vibrating
Fill each form section to the brim, then use a trowel or a piece of wood to smooth the surface. Encourage any trapped air bubbles to release by striking the forms with a trowel or a piece of cane. For large or long sections, use a concrete vibrator if available to eliminate air pockets and ensure a solid, strong final product.
Leave a slight overhang of concrete at the form's edge, allowing for any settling or shrinkage. Once filled, use a trowel to strike off the excess concrete, aiming for a smooth, level surface.
Finishing and setting
Use a float to screed the top of the concrete, ensuring it's level and smooth. If desired, texture the surface with a broom or embed decorative elements like pebbles or glass chips for added interest.
Cover the freshly poured concrete with plastic sheeting to prevent moisture loss and speed up the setting process. Keep it damp for at least the first 72 hours, though follow the concrete mix's specific recommendations. Allow the edging to cure for at least 28 days before applying any sealers or coatings.
Stand back and admire your newly created concrete garden edging. It not only adds a touch of professionalism to your landscape but also yields years of low-maintenance service. Plan your next project, perhaps incorporating more concrete features like stepping stones or a patio, complementing your garden's unique character.




