How to Craft DIY Plane Doors: Crazy Ideas
Ever dreamt of creating unique, eye-catching doors for your home or workshop? Look no further than the humble plane, an essential tool that can help you achieve that perfect, smooth finish. Here, we'll guide you through the process of making doors using your plane, ensuring a fascinating blend of craftsmanship and precision.
Before we dive in, ensure you're well-versed with your plane. If not, consider reading our guide on how to use a plane like a pro to maximize your success.
Choose and Prepare Your Wood
Selecting the right wood is the first step in creating captivating doors. Opt for species that are well-suited to planing, such as alder, ash, or cherry. Avoid woods with knots or excessive irregularities, as these can cause issues during the planing process.



Before you start, ensure your wood is properly dried and seasoned. Green or improperly dried wood can warp or crack during the planing process, leading to disappointment and wasted effort.
Mill the Boards to Thickness
Begin by establishing the final desired thickness of your door. Using your plane, slowly and carefully plane the boards down to this thickness. Be sure to take light cuts, and keep your plane perpendicular to the wood's surface to avoid any tear-out or unevenness.



To ensure consistency, create a simple jig for your thickness planer or use a known-sized block to compare your progress against. This will help maintain an even thickness across your door's entire surface.
Joint the Boards
Next, create a strong, sturdy base for your door by jointing your boards together. Rip the boards to the desired width, then edge join them using your plane and some glue. Apply glue sparingly along one edge of a board, then use your jack plane to create a slight groove in the corresponding edge of the adjacent board.
Press the boards together, ensuring they're flush and aligned. Clamp them in place and allow the glue to dry. Once dry, plane off any excess glue and unevenness, creating a smooth, cohesive surface.






Create the Door's Face
Now that your door has a solid base, it's time to manufacture its distinctive face. This could be a simple flat paneled door or a more intricate, decorative style like the classic six-panel door.
Here, we'll focus on creating a classic six-panel door, highlighting the versatility of your plane in crafting intricate designs.
Establish the Panels
Mark out the six panels on your door, ensuring they're evenly spaced and sized. Using your plane, carefully create a groove along the marked lines. Be sure to keep your cuts consistent and your plane at a 90-degree angle to the wood's surface.

Once these grooves are established, use a chisel or a smaller plane to clean up the edges, ensuring each panel is perfectly defined.
Create the Raised Panels
To give your door that extra touch of elegance, create raised panels within each of your six defined spaces. Measure and mark the center of each panel, then use your plane to gradually create a convex curve around this point, hollowing out the surrounding wood.
Begin with long, sweeping strokes on one side of your mark, gradually working your way to the other. Be patient and take light cuts, as it's easier to take more off than to add it back. Once you've achieved a pleasing curve, smooth out any rough spots and inconsistencies.
Stand back and admire your handiwork. The unique, intricate design you've created using nothing but your plane is a testament to your skill and dedication. Now, all that's left is to finish and install your beautiful, one-of-a-kind door. Happy crafting!





