How to Build Corner Shelves from Wood
If you're looking to add functionality and charm to your space, consider DIY corner shelves. They're not only visually appealing but also an excellent way to maximize storage, particularly in small areas or apartments. This guide will walk you through how to make corner shelves out of wood, offering step-by-step instructions that you can customize to fit your style and needs.
Before you start, determine the size and design of your shelves. Consider the shape and size of the corner where you'll install them, as well as the weight they'll need to support. Remember, the key to successful corner shelves is proper planning and measurement.
Gather Your Materials and Tools
Begin by collecting all the necessary materials and tools. Here's a list to help you get started:



- 2x4 lumber (depending on the size of your shelves, you may need around 6-8 feet)
- Pocket hole jig (or wood screws and plates)
- Miter saw
- Circular saw (optional)
- Drill
- Tape measure
- Pencil
- Sandpaper (120-grit)
- Wood glue
- Finishing materials (stain, paint, or clear coat)
- Wall anchors and screws



Measure and Cut Your Pieces
Measure the height, width, and depth of your corner, then subtract 1/4 inch from each dimension for a snug fit. Next, determine the number and size of the shelves you want. Make sure to account for support and wall brackets. Use these measurements to cut your boards:
- 4 corner uprights (1.5 inches wide, 1 inch thick, and the total height of your shelf minus 1.5 inches)
- 4 shelf supports (2 inches wide, 1 inch thick, and the length of your shelf)
- Number of shelves equal to the amount of shelves you want plus 2 (2 inches wide, 1 inch thick, and the length/depth of your shelf)






Assemble the Corner Uprights
Using your pocket hole jig, create pocket holes at the bottom of each corner upright. Apply wood glue on one side of a corner upright, align it with a shelf support, secure it with screws through the pocket holes, and repeat to create the remaining three corner assemblies. Allow the glue to dry.
Next, attach the side shelf supports to create the long shelves. Apply glue and attach the remaining shelf supports perpendicular to the corner uprights, creating a 'U' shape. Allow the glue to dry, then install the shelves. You'll want to have a 1/4 inch gap between each shelf.
Prepare and Paint Your Shelves
Before installing your shelves, sand them lightly to smooth any rough edges. This will also help paint or stain adhere better. Wipe off any dust, then apply your chosen finish. Allow it to dry according to the manufacturer's instructions.
Once dry, secure the shelves to the wall using wall anchors and screws. Make sure they're level and plumb for safety and stability.
Finishing Touches
Apply a thin coat of clear sealant to protect your finish. Allow it to dry, then style your new corner shelves with your favorite books, decorative objects, or plants.
Installing corner shelves may seem complex, but with careful planning, precise measurement, and attention to detail, you'll create functional and stylish storage that maximizes your space. So go ahead, embrace your inner DIY enthusiast, and let your creativity shine!





