How to Create a Wet Room on a Concrete Floor: Step-by-Step Guide
Transforming a bathroom into a wet room can significantly enhance its functionality and aesthetics. A wet room is fully waterproofed, allowing water to flow freely across the floor and into a drain. This design is particularly suitable for concrete floors, as the solid structure can withstand heavy water usage. Let's delve into the process of creating a wet room on a concrete floor.
Before starting, understand that creating a wet room involves careful planning and execution. You'll need to consider the layout, waterproofing, drainage, and tiling. We'll guide you through these steps, ensuring you're confident in each stage. Remember, the key to a successful wet room is a comprehensive waterproofing strategy.
Waterproofing and Preparing the Concrete Floor
The first step in creating a wet room on a concrete floor is to ensure the floor is clean, dry, and free from contaminants. This involves thoroughly cleaning the surface with a suitable cleaning solution and allowing it to dry completely.



Once dry, the concrete floor needs proper waterproofing. This is typically achieved using a tanking membrane, a maltons membrane, or a powdered coating. These products are designed to prevent water from penetrating the concrete, keeping the underlying structure dry.
Applying a Tanking Membrane
A tanking membrane is a flexible, waterproof barrier that's applied directly to the prepared concrete floor. It's typically made from polyethylene or bitumen and protects the floor from water ingress. To apply, the floor should be clean, dry, and free from dust. Follow the manufacturer's instructions for the best results.



After applying the membrane, ensure it's properly sealed at the edges and any penetrations. You may also need to apply a primer before tiling to enhance adhesion.
Using a Maltons Membrane or Powdered Coating
Maltons membranes and powdered coatings are applied as liquids, then harden to create a waterproof barrier. They provide a smooth, seamless finish and can be tiled directly onto. Similar to tanking membranes, the floor needs to be clean and dry before application.
Apply the maltons membrane or powdered coating using a roller, ensuring complete coverage. The application process varies depending on the specific product, so always follow the manufacturer's guidelines.






Designing the Wet Room Layout
Once the concrete floor is waterproofed, you can start planning the wet room layout. Consider the placement of fixtures like the shower, bath, and any built-in units. The shower should be the focal point and should have a slightly sloped floor toward the drain.
The drain is a critical element in a wet room. It should be installed at the lowest point of the floor slope, ensuring water flows efficiently away. There are different types of drains available, including linear and point drains. Choose one that fits your design aesthetic and functionality needs.
Sloping the Floor
Creating a slope in the wet room floor directs water towards the drain. The slope should be gentle, typically around 1:60. This means for every meter of floor, it should drop by 1.5 cm. The exact slope needed may vary depending on the specific layout and drain location.

To create the slope, you can use a self-levelling compound mixed with a suitable aggregate. This material flows freely and can be poured directly onto the waterproofed floor. Once applied, it will create a smooth, sloping surface ready for tiling.
Planning Fixtures and Fittings
In a wet room, fixtures and fittings need to be carefully considered. Shower fittings should be low-profile and wall-mounted to prevent water splashing onto the floor. Similarly, taps and mixers should be wall-mounted or installed on an elevated plane to keep them dry.
Consider using a wet room curtain or glass screen to separate the shower area from the rest of the room. This prevents water from spreading and affecting other parts of the room. You may also want to install a low-level shower tray to create a barrier between the shower and the rest of the wet room.
Tiling the Wet Room Floor
Tiling is the final stage of creating a wet room on a concrete floor. The tiles provide a seamless, waterproof surface and come in a wide range of materials and styles. They should be laid on a bed of adhesive, then sealed with a suitable grout.
When choosing tiles, opt for ones specifically designed for wet room use. These often have a textured surface for grip, making them safer when wet. Vinyl or porcelain tiles are popular choices due to their durability and ease of maintenance.
Applying the Tiles
To lay the tiles, start by applying the adhesive to the floor, working in small sections at a time. Press the tiles firmly into the adhesive, ensuring good contact. Use spacers to maintain even gaps between the tiles. Allow the adhesive to cure according to the manufacturer's instructions.
Once the adhesive is fully cured, apply the grout. Ensure the grout lines are completely filled, then clean any excess off the tile surface. Allow the grout to cure, following the manufacturer's guidelines for the best results.
Your wet room is now complete! Enjoy the seamless, modern look and feel. Regular cleaning and maintenance will ensure your wet room remains functional and attractive for years to come. Consider using non-slip sealants or cleansers to keep the tile surface safe and clean.





