how to make a tea light heater

How to Make a Tea Light Heater

By Nicole Lewis
AD

Liberate your outdoor evenings from chilly nights with a DIY tea light heater, a clever, eco-friendly, and budget-conscious way to keep warm during alfresco soirees. This tutorial walks you through the steps to create your own tea light heater, using readily available materials and simple tools.

Before you dive in, ensure you're familiar with basic safety precautions when handling fire and heat sources. Always supervise your tea light heater and never leave it unattended. Now, let's embark on this rewarding project.

Gather Your Materials and Tools

To create your tea light heater, you'll need the following materials and tools:

AD
DIY Emergency Candle Heater Hack: Stay Warm with Terracotta Pots
DIY Emergency Candle Heater Hack: Stay Warm with Terracotta Pots
Single Tea Light Heater
Single Tea Light Heater
there is a sign that says no
there is a sign that says no

  • Hollow, clay or terracotta flowerpot (approx. 6-inch diameter)
  • Aluminum foil
  • Tea lights (LED or traditional)
  • Scissors
  • Ruler
  • Pencil
  • Needle-nose pliers

How To Make a Tea Light Candle Heater in 5 Minutes
How To Make a Tea Light Candle Heater in 5 Minutes
there are many candles in the basket on the table and next to it is a candle holder
there are many candles in the basket on the table and next to it is a candle holder
Terracotta Pot Heaters - Kontent Kiddos
Terracotta Pot Heaters - Kontent Kiddos

Prepare Your Flowerpot

Begin by ensuring your flowerpot is clean and dry. If it's glazed, lightly sand the surface to enhance the foil's adhesion.

Next, create a pattern for cutting ventilation holes. Drawodaline horizontally around the pot, about an inch from the bottom. Then, draw a second line a few inches below the rim. Connect these lines with vertical lines to create a grid of ½-inch by ½-inch squares.

AD

Create Ventilation Holes

Using scissors or a box cutter, cut along the lines to create ventilation holes. Be careful not to cut through the bottom or the sides of the pot.

Candles To Heat A Room, Diy Non-electric Space Heater, How To Heat A Small Room, Cheap Ways To Heat A Room, Low-cost Space Heater, How To Make A Backpacking Stove, Heat A Room With A Candle, How To Heat A Room With Candles, How To Make A Pot Heater
Candles To Heat A Room, Diy Non-electric Space Heater, How To Heat A Small Room, Cheap Ways To Heat A Room, Low-cost Space Heater, How To Make A Backpacking Stove, Heat A Room With A Candle, How To Heat A Room With Candles, How To Make A Pot Heater
two pictures side by side one with a lamp and the other with an upside down light
two pictures side by side one with a lamp and the other with an upside down light
there are two pots, four lights, and a bucket next to each other on the table
there are two pots, four lights, and a bucket next to each other on the table
Single Tea Light Heater
Single Tea Light Heater
How to Makeshift a Candle-Powered Tea Light Oven!
How to Makeshift a Candle-Powered Tea Light Oven!
Teelichtofen günstig selber bauen
Teelichtofen günstig selber bauen

Scrub the pot gently with a wire brush to remove any debris or sharp edges. This step ensures your aluminum foil adheres smoothly.

Create theInner Liner

Now it's time to insert an aluminum foil liner into the pot, which will reflect heat and protect the clay.

AD

Measure and cut an aluminum foil sheet that fits snugly inside the pot, with about an inch extending beyond the top. Tear off this excess foil once it's in place.

Make a clay pot heater for emergency warmth
Make a clay pot heater for emergency warmth

Insert the Foil Liner

Carefully insert the foil liner into the pot, ensuring it's flat and smooth against the sides and bottom. The foil's shiny side should face outwards.

Use your finger or a chopstick to press the foil liner flat against the bottom of the pot, pushing it through the ventilation holes.

AD

Prepare theTea Lights

Gently pull the wicks out of the tea lights and discard the wax. Keep the metal cups.

Using needle-nose pliers, bend the wick's inner loop outwards to create a 90-degree angle. This will allow the wick to rest against the metal cup's rim, making it easier to light.

Assemble Your Tea Light Heater

Now comes the final assembly of your tea light heater. If done correctly, it will convert the heat from the tea lights' flames into infra-red radiation, warming up your outdoor space.

Place the heated metal cups containing the wick into the flowerpot, positioning them evenly around the inner foil liner. Ensure they're not too close together, as this could cause them to tip over once lit.

Light Your Tea Light Heater

Carefully light the tea lights, using a long match or a long-reach lighter. Ensure the flame touches the wick's bent tip.

Remember, always supervise your tea light heater when it's lit and never leave it unattended. Extinguish the flames before moving or storing the heater.

Enjoy your cozy evenings outdoors, courtesy of your very own tea light heater! Care for your heater by cleaning it occasionally and replacing the tea lights as needed. Until next time, happy DIYing!

AD