How to Make a Simple Bar Table
In the realm of DIY furniture projects, there's perhaps no piece as versatile and useful as the bar table. Whether you're aiming to add extra seating in your kitchen or create the ultimate game room, a well-built bar table can be the perfect addition. Today, we're going to guide you through a simple step-by-step process to create your own, without needing a woodworking shop at your disposal. Let's dive right in.
First, let's talk about the design. A simple bar table typically consists of two parts: the top and the legs. For the top, a common size is 36" (91cm) in length and 24" (61cm) in width, which allows for comfortable seating on standard bar stools. As for the legs, we'll use a simple four-legged design with cross braces for added stability.
Materials and Tools
To keep it simple, we'll use just a few materials:



- One 2x10 x 8' pressure-treated lumber for the tabletop
- Four 2x4 x 8' pressure-treated lumber for the legs and supports
- One box of 2-1/2" exterior wood screws
- One box of 1-1/4" exterior wood screws
- Wood glue
As for tools, you'll need:
- Tape measure
- Circular saw
- Drill and driver bits
- Clamps
- Sandpaper (120-grit)
Cutting the Tabletop
Using your circular saw, cut the 2x10 board into two pieces, each 36" long. These will serve as the top and bottom of your tabletop.



Next, cut two more pieces, each 24" long. These will be the sides of your tabletop. You can use the remaining 24" scraps for other projects or discard them.
Assembling the Tabletop
Apply wood glue to one edge of each side piece. Then, using your drill and 2-1/2" screws, attach the sides to the top and bottom pieces, ensuring the tabletop is square. Allow the glue to dry according to the package instructions before proceeding.
Once dry, sand any rough edges or surfaces with your 120-grit sandpaper. This will ensure a smooth finish and make painting or staining easier.






Building the Legs and Base
The legs of your bar table are simple 2x4 posts. Using your circular saw, cut four pieces, each 29" long. These will be the legs.
Next, cut four more pieces, each 12" long. These will be the supports for the tabletop. Drill two pocket holes into each support piece, 1" from the top. These will allow us to attach the supports to the tabletop without screws showing.
Attaching the Legs
Apply wood glue to one end of each leg. Then, using your drill and 2-1/2" screws, attach the legs to the inside of the supports, 1/2" from the top. Ensure the legs are perpendicular to the supports. Allow the glue to dry.

Once dry, use clamps to attach the supports to the tabletop. Drill through the pocket holes and into the tabletop using your 1-1/4" screws. Ensure the legs are square with the tabletop.
Attaching the Cross Braces
For added stability, we'll add two cross braces. Cut two pieces of 2x4, each 22" long. Attach these to the legs using your drill and 2-1/2" screws, one 6" from the top and the other 6" from the bottom.
Finally, paint or stain your bar table to match your space. Allow it to dry completely before placing it in its final location. Now, all that's left to do is add some bar stools and enjoy your new addition!





