"DIY Roman Shade for Doors: A Step-by-Step Guide"
Looking to add a touch of elegance and privacy to your door? Roman shades are a classic choice that can greatly enhance both the aesthetics and functionality of your space. While they are typically used for windows, it's entirely possible to use them for doors as well, creating a unique and stylish statement piece. But how do you go about making one? This comprehensive guide will walk you through the process, from measuring to installation, ensuring you have a stunning, handcrafted roman shade for your door in no time.
Before we dive into the steps, it's important to understand the different types of roman shades - flat, traditional, and relaxed folding. For doors, flat shades are usually the best choice as they stack neatly when opened, ensuring clear access. Now, let's get started!
Materials and Tools
The first step before any crafting begins is gathering all the necessary materials and tools. For a roman shade, you'll need a combination of fabric, cord, a dowel rod, and hardware. The exact quantities will depend on the size and type of shade you're making, but as a starting point, consider the following:



- Fabric: Double the height of your door for a full shade, or half for a tier on tier shade.
- Cord: One-sixteenth to one-eighth inch diameter, cut to approximately three times the width of your shade, plus 16 inches.
- Dowel rod: The width of your shade, plus one inch.
- Hardware: Six brackets, four cord cleats, two ball-bearing casters or eye screws, and two hollow stop cord cleats.
- Tools: Sewing machine, tape measure, scissors, ruler, permanent marker, pencil, drill, and screwdriver.
Measuring Your Door
Accurate measuring is crucial for a perfect fit. Measure the width of your door and its height, from the top to the threshold. Add an additional 2 inches to both the width and height to account for the header and side panels. This will be the size of your shade.
You should also determine the placement of your brackets. For a standard door, brackets are typically placed 2.5 inches from the top and bottom of the shade. However, you may need to adjust this for your specific doorway or hardware.



Cutting and Preparing Your Fabric
Now that you have your measurements, cut your fabric to size, ensuring it's wide enough to accommodate the calculated width with an additional 2 inches for side panels. Then, hem the top and sides of the fabric, leaving the bottom raw for now.
For the header, cut a piece of fabric or use interfacing to create a strip that's 3 inches high by the width of your shade plus 4 inches. This will create a header pocket for the dowel rod. Sew this onto the top of your shade, creating a pocket for the dowel.
Installing the Hardware
Once your fabric is prepared, it's time to start installing the hardware. Start by positioning your brackets on the door frame, ensuring they're level and at the correct height. Mark these positions with a pencil, then use a drill to create holes for screws.






Attach your brackets using the appropriate screws, ensuring they're securely fastened to the door frame. Now, you're ready to start installing the shade mechanism.
Attaching the Dowel Rod
Insert the dowel rod into the header pocket you've created in the top of your shade. Ensure it's centered and the ends extend out slightly from the sides.
Position the shade in the doorway, with the bottom of the shade at the correct height. Mark the position of the dowel rod on the brackets, then drill small holes to accommodate the ends of the dowel rod.

Hanging the Shade
Insert the ends of the dowel rod into the holes you've drilled in the brackets. The shade should now hang correctly, with the bottom still raw.
From the bottom of the shade, measure up 2 inches and mark this position. This is where your casters or eye screws will be attached. Mark and drill holes here, then attach the casters or screws.
Creating the Lift Mechanism
The lift mechanism is what will allow your shade to be raised and lowered. For this, you'll use cord, eye screws, cord cleats, and hollow stop cord cleats.
First, thread one end of your cord through an eye screw at the top of the shade, then through a cord cleat on the side of the door frame. Repeat this process with the other side.
Adjusting the Cord
Pull the cord down until the shade is just clear of the floor. Then, thread the other end of the cord through a hollow stop cord cleat at the bottom of the door. This will create a loop that you can use to pull the shade up and down.
Once the shade is raised, the hollow stop cord cleat will catch the cord, holding the shade in place at any height. However, you'll need to adjust the tension on the cord to ensure the shade moves smoothly. You can do this by tying a knot at the top of the cord or using cord clamp to adjust its length.
Finishing the Shade
With your lift mechanism in place, your roman shade is almost complete. All that's left is to finish the bottom of the shade.
Measure 2 inches from the bottom of the shade and mark this position. Then, fold the raw edge under by 1 inch, creating a hem. Stitch this into place, creating a clean, finished bottom edge for your shade.
And there you have it! Your very own roman shade for your door is now ready to use. Whether you're looking to add a touch of elegance to your entryway or provide some privacy in your mudroom, this versatile shade is sure to fit the bill. So go ahead, enjoy the satisfaction of a job well done, and don't forget to step back and admire your handiwork.





