how to make a large double bow with ribbon

How to Make a Large Double Bow with Ribbon

By Olivia Johnson
AD

Adding a large double bow to a gift, package, or wreath instantly elevates its presentation. Ribbons come in various colors and patterns, allowing you to match or complement any theme. If you've been wondering how to make a large double bow with ribbon, you've come to the right place. We'll walk you through a simple, step-by-step guide to create a stunning, oversized double bow.

Before we dive into the tutorial, ensure you have enough ribbon – roughly 1 to 1.5 yards (0.9 to 1.37 meters) for a large bow – and a sharp pair of scissors. Wider ribbon creates a more dramatic effect, but regular 1.5 to 2-inch (3.8 to 5-cm) ribbons work well too. Now, let's get started!

Preparing the Ribbon

The first step in creating a large double bow is preparing your ribbon. Measuring and cutting the ribbon accurately sets the foundation for your bow.

AD
Let’s make a two ribbon bow! 🎀 #shorts #diy #bow #ribbon #decor
Let’s make a two ribbon bow! 🎀 #shorts #diy #bow #ribbon #decor
How To Make A Double Ribbon Bow For A Wreath
How To Make A Double Ribbon Bow For A Wreath
How to make a double bow for your wreath!
How to make a double bow for your wreath!

For a large double bow, you'll need three pieces of ribbon:

  • One piece for the base of the bow, typically around half the total length (e.g., 0.5 to 0.75 yards or 0.46 to 0.69 meters).
  • Two pieces for the loops, about a third each of the remaining length (e.g., approximately 0.3 yards or 0.28 meters each).

Measuring and Cutting the Ribbon

Measure and cut your ribbon according to the lengths specified above. For accuracy, it's best to use a ruler or a measuring tape.

How to Make a Bow with Two Ribbons
How to Make a Bow with Two Ribbons
How to Make a Bow - Double Ribbon Bow
How to Make a Bow - Double Ribbon Bow
how to make a bow with two pieces of ribbon on the front of a wreath
how to make a bow with two pieces of ribbon on the front of a wreath

mistakes do happen, so if you're unsure, it's better to cut a little more than you need and trim it later. Just remember that wider ribbon uses up more length, so adjust your measurements accordingly.

Creating the Base for the Bow

Now that you have your three pieces of ribbon, it's time to create the base of your bow. Take the longest piece and fold it in half width-wise.

AD

Create a loop with the folded end and place it at the center of our work surface. This will be the base where you'll attach the loops to create the double bow.

Multi layer Bow with ribbon 🎀 #diy #diycrafts #ribbonbow #handmade #shorts #jannatcraftingandart
Multi layer Bow with ribbon 🎀 #diy #diycrafts #ribbonbow #handmade #shorts #jannatcraftingandart
a person is holding a red bow on top of a box with the words how to double loop bows
a person is holding a red bow on top of a box with the words how to double loop bows
9 Ways to Make a Bow Video
9 Ways to Make a Bow Video
how to tie a double ribbon bow with the text, how to tie a double ribbon bow
how to tie a double ribbon bow with the text, how to tie a double ribbon bow
how to make a double ribbon bow
how to make a double ribbon bow
How to make a double bow with ribbon
How to make a double bow with ribbon

Forming the Loops for the Double Bow

With the base in place, you can start forming the loops that will create the bow's dramatic effect.

Having the remaining two pieces of ribbon, fold each in half width-wise to create a loop in the center of each piece. To ensure symmetry, keep the two loops the same size.

AD

Attaching the First Loop

Take one of the folded ribbons and bring the looped edges together, placing them on top of the base's loop. The ends of the ribbon should be facing out on either side.

1.4K views · 150 reactions | Here’s how to make those large bows with YOUR FEET!! These are perfect for your door wreaths or garlands! Save for later. Comment LINK for ribbon and steps!! ✨ I made my bow a double loop single ribbon bow but the options are endless. Steps Below ⬇️ ✨Cut a long piece of ribbon and wrap it around your feet. Secure an extra loop so there will be two loops on each side of the bow around each foot. ✨Cross the two ribbon ends in front. The top ribbon tucks under the other and down and around the center of your two feet where the ribbon is attached. ✨Secure by tying a knot and pull now off of your feet. ✨Fluff and cut flag tail ends on each piece of ribbon! #howto #bows #ribbon #ribbonbows #ribbonbow #bowribbkn #diybows #diy #diychristmas #budgetfriendly #stylewithme #christmascheer #deckthehalls #holidayprep #christmasdecor #wreath #garland #christmasribbon #modernhome #modern #neutral #neutralhome #diy #diyhome #holidaycleaning | Waz Home Decor | Facebook
1.4K views · 150 reactions | Here’s how to make those large bows with YOUR FEET!! These are perfect for your door wreaths or garlands! Save for later. Comment LINK for ribbon and steps!! ✨ I made my bow a double loop single ribbon bow but the options are endless. Steps Below ⬇️ ✨Cut a long piece of ribbon and wrap it around your feet. Secure an extra loop so there will be two loops on each side of the bow around each foot. ✨Cross the two ribbon ends in front. The top ribbon tucks under the other and down and around the center of your two feet where the ribbon is attached. ✨Secure by tying a knot and pull now off of your feet. ✨Fluff and cut flag tail ends on each piece of ribbon! #howto #bows #ribbon #ribbonbows #ribbonbow #bowribbkn #diybows #diy #diychristmas #budgetfriendly #stylewithme #christmascheer #deckthehalls #holidayprep #christmasdecor #wreath #garland #christmasribbon #modernhome #modern #neutral #neutralhome #diy #diyhome #holidaycleaning | Waz Home Decor | Facebook

Holding the ribbon in place, pull the ends through the loop and pull gently to create a loose knot. Adjust the loop to ensure it's balanced and smooth.

Adding the Second Loop

Repeat the process with the remaining looped ribbon. Place it on top of the first loop, ensuring they're equal in size. Again, make a loose knot to secure it in place.

AD

At this point, you should have a double bow with two loops balanced on top of the base. However, the bow might look a bit lopsided or messy. Don't worry; we'll clean it up in the next section.

Refining the Double Bow

Now that you have the basic structure of your large double bow, it's time to refine and perfect it.

Using your scissors, trim any excess ribbon from the ends of the loops. For a cleaner look, you can fold the ends under and secure them with a small dab of hot glue or by sewing them in place.

Adjusting the Loops

To create that perfect double bow look, carefully adjust the loops. Gently tug at the bottom of each loop to make them fuller and more rounded. Use your fingers to smooth out any wrinkles or unevenness.

If one loop is larger than the other, carefully pull at the ends to make them more balanced. Be patient, as this process takes time and practice to master.

Fluffing the Bow

The final touch is to fluff up the bow for a soft, voluminous look. Carefully lift the loops away from the base and gently pull at any parts that look flat or dense. This will create a light, bouncy effect that makes the bow look even more impressive.

Once you're satisfied with the shape and volume of your large double bow, you're ready to attach it to your gift, package, or wreath.

Congratulations! You've now mastered the art of creating a large double bow with ribbon. Don't be afraid to experiment with different colors, patterns, and ribbon widths to create unique, eye-catching bows for any occasion. Happy crafting!

AD