Mastering the DIY: Effortless Guide on How to Make a Door Swing Out
Ever found yourself in a space where an inward-opening door isn't cutting it? Making a door swing out can significantly improve access and egress, especially in areas with tight spaces or frequent traffic. This guide will walk you through the process, step by step, ensuring your door swings out smoothly and safely.
Before we dive into the process, it's crucial to understand that converting a door swing direction isn't as simple as just switching the hinges. You'll need to considerclearance, safety, and building codes. This guide assumes you're working with a standard interior door and doesn't involve complex structural changes. Let's get started!
Planning Your Door Swing Direction Change
Before you pick up your tools, take the time to plan. Measure the space to ensure an out-swinging door won't obstruct traffic or hit any walls, furniture, or appliances when open. Check local building codes for any specific regulations about door swing directions, especially if it's a fire EXIT door.



Once you're sure an out-swinging door is feasible, make a sketch of your plan. Note the specific measurements, hinge location, and any necessary adjustments. It's always a good idea to double-check your plans before you start.
Gather Your Tools and Materials
To make a door swing out, you'll need a few tools and materials. Here's a list to help you gather everything before you start:



- Screwdriver (handheld or drill) that corresponds to your door's screws
- New hinges ( Ensure they're the right size and type for your door and frame )
- Drill (if you're not using a drill screwdriver)
- Drill bit set (if you need to create new screw holes)
- Tape measure
- Pencil
- Hammer
- Chisel (if you need to make new mortises)
- Shims (to adjust the door gap)
Removing the Existing Door and Hinges
Start by opening the door and removing the hinge pins. You can usually do this by tapping the pin with a hammer and a screwdriver. Once the pins are out, remove the hinges by unscrewing them from the door and frame.
Next, remove the door from the frame. You may need to adjust the strike plate or lock set to fit the new hinge location. If you're changing the size of the mortises (the holes in the door and frame where the hinge leaves are placed), use a chisel to create new ones.
Installing the New Hinges for an Out-Swinging Door
Now that you have your door and frame bare, it's time to install the new hinges. Since you'll be reversing the hinge order, you'll need to flip one hinge leaf so it opens correctly. The side with the pin hole should be on the top for top hinges and the bottom for bottom hinges.






Align the hinge leaves on the door and frame where they'll go. The hinge pin should be closest to the doorway when open. Use a pencil to trace around the hinge leaves. This will give you a guideline for drilling new screw holes or creating new mortises.
Drilling New Screw Holes or Making New Mortises
If you're simply rescrewing the hinges into new locations, use a drill bit that's slightly smaller than your screw's diameter to drill pilot holes. If you're creating new mortises, use a chisel to carve out the new hinge leaf housing.
Once you've drilled your pilot holes or created your new mortises, it's time to secure the hinges. Place the hinges back onto the door and frame, ensuring they're aligned with your guidelines. Drive the screws back through the hinge leaves and into the door and frame.

Hanging the Door and Adjusting the Gap
With the hinges secure, hang the door back onto the frame. The hinge pins should slide in easily. If they don't, you may need to adjust the hinges or the door slightly.
Once the door is hung, check the gap between the door and the frame. If it's too large or small, shim behind the hinges or the strike plate to adjust the door's alignment. Test the door's swing to ensure it's opening and closing smoothly.
Finishing Up
After everything is properly situated, replace your door hardware, such as the doorknob and lock set, ensuring they fit the new swing direction. Give the door a few test swings, and make any necessary adjustments.
Congratulations! You've successfully changed your door's swing direction. You've now improved access, safety, or both in your space. Enjoy your new out-swinging door!




