how to make a dog treat holder

Create the Perfect DIY Dog Treat Holder: Simple Steps

By John Rodriguez
AD

Treat your furry friend to a thoughtful, homemade gift with a dog treat holder. Not only is this a fun DIY project, but it's also a practical way to keep their favorite snacks within reach and off the ground. Here's a simple, step-by-step guide to make your own dog treat holder using basic materials that you might already have at home.

Before we dive into the tutorials, let's consider what makes a great dog treat holder. It should be durable, easy to clean, and secure enough to prevent treats from spilling out. It's also an added bonus if it's attractive and fits well with your home decor. Now, let's explore two popular methods to create this pawsome accessory.

Using Tin Can and Wooden Spoon

A tin can and wooden spoon combination creates a rustic, farmhouse-inspired treat holder that's easy to make. Here's how:

AD
Stop Wasting Money! Make This DIY Dog Treat Pouch in Minutes
Stop Wasting Money! Make This DIY Dog Treat Pouch in Minutes
Dog bag dispenser tutorial
Dog bag dispenser tutorial
DIY Dog Treat Pouch (Easy Craft)
DIY Dog Treat Pouch (Easy Craft)

Materials needed: Used tin can, wooden spoon, acrylic paint (optional), paintbrush (if painting), hammer, nail, and sandpaper.

Preparing the Can

Start by thoroughly cleaning and removing the label from the tin can. Use sandpaper to lightly sand the outer surface to help paint adhere better if you choose to paint it. If painting, apply 1-2 coats of paint, allowing each to dry completely.

How To Make A Dog Poop Bag Dispenser: 9 Easy DIYs
How To Make A Dog Poop Bag Dispenser: 9 Easy DIYs
the instructions for making a dog poop bag holder are shown in three different pictures
the instructions for making a dog poop bag holder are shown in three different pictures
DIY Doggie Waste Bag Holder | SPECIAL OCCASION EP.1-6
DIY Doggie Waste Bag Holder | SPECIAL OCCASION EP.1-6

Once the can is dry, you can begin drilling the hole for the spoon. Mark the center of the can using a pencil and ruler. Using a hammer and nail, gently tap the nail into the mark to create a pilot hole. Then, use a metal hole punch or tin snips to cut out the marked circle.

Attaching the Spoon

Measure and mark the center of your wooden spoon. Drill a hole through the spoon that matches the diameter of your tin can. Apply glue to the inside of the spoon hole and the outer surface of the can where the hole is. Insert the can into the spoon and align the holes. Allow the glue to dry completely.

AD

Once dry, check the fit to ensure the can spins easily on the spoon. If needed, sand any rough edges. Now you have a charming treat holder ready to dispense goodness for your pup!

the zippered pouch is made from fabric and has a flower on it's side
the zippered pouch is made from fabric and has a flower on it's side
a mason jar hanging on a wall with the words how to make a do it treat - less holder
a mason jar hanging on a wall with the words how to make a do it treat - less holder
14 Best DIY Dog Leash Holder Ideas
14 Best DIY Dog Leash Holder Ideas
DIY Dog Treat Dispenser to Make at Home 🐢🏠
DIY Dog Treat Dispenser to Make at Home 🐢🏠
How to Make A Dog Poop Bag Holder
How to Make A Dog Poop Bag Holder
a black dog sitting on the floor next to empty water bottles and an empty plastic bottle
a black dog sitting on the floor next to empty water bottles and an empty plastic bottle

DIY Treat Ball Holder

For a playful, interactive variation, create a treat ball holder that allows your dog to roll the ball to get treats. Here's how:

Materials needed: Plastic ball (tennis or squash ball), large drill bit, saw, fine sandpaper, clear sealant spray (optional), and dog treats.

AD

Drilling the Hole

First, mark the center of the ball with a pencil. Using a large drill bit (at least 1.5 inches wide) that matches the size of your dog's treats, drill a hole through the ball.

How to Make a Raised Dog Feeder
How to Make a Raised Dog Feeder

Be cautious while drilling, and wear safety glasses to protect your eyes from debris. Drill at a slow steady speed to prevent the ball from breaking. Once done, use sandpaper to smooth any rough edges inside and out.

Customizing and Finishing

If you'd like, spray the ball with a clear sealant to protect it from moisture and prolong its life. Allow the sealant to dry completely before inserting treats. Fill the ball with your dog's favorite treats, and let the rolling fun begin!

AD

Whether you choose the rustic tin can and spoon holder or the interactive treat ball, both options are excellent ways to engage your dog and make their day a little brighter. Happy crafting, and enjoy the tail-wagging appreciation from your furry friend!

AD